scrubbr 0.3.0

Sanitize Linux diagnostics before pasting them into an LLM

scrubbr

Sanitize Linux diagnostics before pasting them into an LLM chat.

When you ask an AI assistant for help with a system problem, you usually paste in logs — and logs are full of things that identify you: your username, your hostname, your Wi-Fi network name, hardware addresses, sometimes even keys and passwords. scrubbr replaces all of that with harmless random look-alikes, shows you exactly what it changed, and only then hands the text over.

The same value always gets the same replacement, so the log still makes sense: if your laptop appears forty times, it becomes host-a all forty times, and the assistant can still follow what happened.

Install

You need Python 3.13 or newer. Then, with either uv or pipx:

uv tool install scrubbr

pipx install scrubbr

After that, the scrubbr command is available in your terminal, and scrubbr --version tells you which release you have.

To run unreleased changes, install from the repository instead:

uv tool install git+https://github.com/greenseeing/scrubbr

Updating

uv tool upgrade scrubbr

or pipx upgrade scrubbr. CHANGELOG.md lists what changed in each release.

A git install is a moving branch rather than a version, so there is nothing for upgrade to compare against; reinstall it instead:

uv tool install --force git+https://github.com/greenseeing/scrubbr

How to use it

Clean up a log file

Say a program wrote a log you want to share. Point scrubbr at the file and tell it where to save the cleaned copy with -o:

scrubbr boot-log.txt -o boot-log.clean.txt

scrubbr shows you a review of every change it wants to make (see below). Once you approve, the safe copy lands in boot-log.clean.txt, ready to attach or paste. Your original file is never modified.

Clean up a command's output

You can also feed scrubbr the output of another command directly, using a pipe (|):

dmesg | scrubbr -o dmesg.clean.txt
journalctl -u NetworkManager -n 200 | scrubbr -o nm.clean.txt

The pipe sends whatever the first command prints straight into scrubbr, so nothing sensitive ever touches your disk unscrubbed.

Straight to the clipboard

If you'd rather skip the file entirely, pipe scrubbr's output into your clipboard tool and paste it into the chat:

journalctl -u NetworkManager -n 200 | scrubbr | wl-copy

(wl-copy is for Wayland desktops; on X11 use xclip -selection clipboard.)

Without -o, scrubbr prints the cleaned text to standard output — the terminal, or whatever you pipe it into. The report of what was changed always goes to the screen separately (stderr), so it never mixes into the cleaned text. If you redirect stderr too (so it isn't a terminal), the report switches to JSON lines — one event per line — so scripts can parse it.

The review step

Before emitting anything, scrubbr opens a full-screen review on your terminal: a table with one row per distinct value it wants to replace — its category, how often it occurs, and what it will become. Anything that looks sensitive but that scrubbr didn't recognise well enough to rewrite is listed too, as a warn row. From there:

Key	What it does
space	keep the selected value as it is (press again to scrub it after all); on a warn row, scrub that text too
a	scrub additional text — type to fuzzy-find any token from the input, or enter an exact string
r	choose the selected value's replacement: the minted alias, [REDACTED], or something you type
y	show the full diff; y again emits, Escape goes back to the table
q	abort — nothing is printed and no file is written

Every change re-runs the scrubber, so a value you keep is restored at every occurrence and text you add is replaced at every occurrence, with the report and warnings kept honest throughout.

With --plain — or on a terminal too limited for the full screen — you get the classic prompt instead: the diff, the warning list, and one question:

emit scrubbed text? [y/N]

Type y to approve. Anything else (including just pressing Enter) discards the output. If you trust a run and want to skip the review entirely, pass -y.

Options

Option	What it does
-o FILE, --output FILE	save the cleaned text to FILE instead of printing it
-y, --no-review	skip the interactive review
--plain	review with the classic y/N prompt instead of the full-screen interface
-v, --verbose	list every replaced value: what it was, how often it occurred, what it became
--strict	refuse to emit anything while suspicious strings remain unscrubbed
--also TEXT	also scrub this exact string; repeat the flag for several. IPs, long hex, UUIDs and emails keep their shape (IPs are replaced even when private or loopback); names become [REDACTED]
--no-identity	don't seed the scanner with this machine's hostname, user and machine-id
--version	print the installed version and exit

The report normally shows only counts per category. With -v it also prints a table with one row per distinct value, so you can see exactly what maps to what:

kind   count  text                alias
mac        3  aa:bb:cc:dd:ee:ff   ea:82:db:a4:68:68
email      1  [e-mail]  [e-mail]

The table is sized to your window; values too long for their column are shortened in the middle (9f2a1c7b…4c6b). Be aware this prints the original sensitive values to your screen (stderr), so don't share that part.

--also is for values only you know are sensitive — an internal server name, a project codename, an address inside your own network:

scrubbr app.log -o app.clean.txt --also prod-db-07 --also 10.1.2.7

Each value's type is detected from its shape. An IP address, hex of 32+ characters, a UUID or an email is replaced the same way scrubbr replaces ones it finds on its own — same shape, same alias pool — and a declared IP is replaced even if it is private or loopback, which incidental matches are not. A value with no recognisable shape (a name) becomes [REDACTED]; note that every such name renders identically, so two declared names cannot be told apart in the output.

What it replaces

Hardware	MAC and Bluetooth addresses, disk WWN / by-id paths
Network	public IPv4 and IPv6, SSIDs, BSSIDs
Identity	this machine's hostname, your username, /home/<user>, machine-id, emails
Secrets	PEM blocks, openssl passwd hashes, JWTs, psk=/password= values, hex ≥32 chars
Other	UUIDs, certificate fingerprints

Replacements keep the original's shape: AA-BB-CC-DD-EE-FF stays hyphenated and uppercase, a v4 UUID stays a valid v4 UUID, public IPs become RFC 5737 documentation addresses. Names become readable aliases (host-a, user-a, network-a) because host-a can't reach host-b is diagnosable and two random hex blobs are not.

Generated MACs are always locally-administered unicast (second hex digit 2, 6, a, e), which is what macchanger, systemd-networkd and Android all produce — and which makes it impossible to accidentally mint a broadcast or reserved multicast address.

What it deliberately leaves alone

127.0.0.1, ::1, 0.0.0.0, RFC1918 private ranges, reserved MACs (broadcast, IPv4/IPv6 multicast, STP, VRRP), standard system paths, and system usernames like root. These identify nobody and carry diagnostic meaning; scrubbing them would hand the LLM a log it cannot reason about.

Trust

Regex scrubbing has false negatives, and the failure mode is silent. Two mitigations:

• Anything left over that looks sensitive is reported, not rewritten, with a line number: high entropy, a known credential prefix like ghp_ or AKIA, or colon-hex that is recognisably structured but is neither a MAC, a fingerprint nor a valid address. The tool tells you where it is unsure rather than implying it caught everything.
• Every run shows an interactive diff on your terminal before emitting. Skip it with -y.

--strict refuses to emit at all while anything suspicious remains unscrubbed.

Known limits

• Hostnames are found by asking this system for its own name. A log from another machine carries a hostname scrubbr cannot guess — pass it explicitly with --also other-host (it will appear as [REDACTED]).
• --also matches the exact spelling you give it. For IPv6 that means --also fe80::1 also covers FE80::1 but not the longhand fe80:0:0:0:0:0:0:1 — declare each spelling the log uses.
• Hex of 32+ characters is replaced with no exceptions, so checksums and 40-character git SHAs get scrambled too. That is deliberate: no special cases means nothing slips through.
• Replacements are per-run. Sanitizing the same file twice gives different output; sanitize once and keep the result if you need two pastes to line up.

Also worth knowing: don't use journalctl -x for output you intend to share. The explanatory text it adds widens what gets exposed, and no scrubber can help with data you chose to include.

Exit codes

For scripts and the curious:

Exit	Meaning
0	scrubbed text emitted
1	you declined at the review
2	refused under --strict because suspicious strings remained
3	refused because there was no terminal to review on — pass -y to skip review
4	the output file given with -o could not be written

For the review, scrubbr opens the controlling terminal (/dev/tty) so pipes stay free; where that device doesn't exist it falls back to your terminal's own input and output, as long as both are genuinely interactive. Exit 3 only happens when neither is available — and it exists because the alternative is worse: emitting unreviewed text exactly when the safety gate could not run. Skipping the review should be your decision, not a fallback. On any refusal, -o writes nothing — the output file is only created after you approve.

Releasing

For maintainers. Bump the version:

uv version --bump patch

Move the entries under ## [Unreleased] in CHANGELOG.md into a section for the new version, commit both files, then tag:

git tag v0.2.1 && git push origin main --tags

The tag triggers .github/workflows/release.yml, which builds the wheel and source archive, smoke-tests both in an isolated environment, publishes to PyPI using trusted publishing — no API token is stored anywhere — and then opens a GitHub release for the tag, with notes taken from that version's section of the changelog and both artifacts attached.

It refuses to publish if the tag and the version in pyproject.toml disagree, because a PyPI version can never be replaced once uploaded. The upload itself skips files the index already has, so a run that fails partway can be re-run safely.