sdev 1.0.2

Small toolkit for automating a serial-attached Linux shell

sdev

Small toolkit for automating a serial-attached Linux shell.

Installation

pip install -e .

CLI

# Run a command
sdev -p "ls /proc/meminfo" -d /dev/ttyUSB0 -b 115200

# Stream output incrementally
sdev -p "tail -f /var/log/syslog" --stream

# Stream with server-side regex filter
sdev -p "tail -f /var/log/syslog" --stream --grep "ERROR"

# Stream with complete-line output only
sdev -p "dmesg" --stream --line-mode

# Parse output with regex
sdev -p "cat /proc/meminfo" --parse "Mem.*"

# Wait for a specific output marker instead of shell prompt
sdev -p "./mnn_perf -m model.mnn" --end-flag "Frame rate:"

# Clear stray processes before running a command
sdev -p "uptime" --doctor

# Save defaults so you can omit -d and -b
sdev set-default /dev/ttyUSB0 115200
sdev -p "ls /proc/meminfo"

# Send Ctrl+C to interrupt a running command (without -p)
sdev --interrupt -d /dev/ttyUSB0 -b 115200

# Detect serial boards on this system
sdev --probe
sdev --probe --probe-baud 9600 --probe-baud 38400

# Custom prompt patterns for non-standard shells
sdev -p "ls" --prompt "[root@board]# " --prompt "admin@box> "

CLI options

Flag	Description
-p, --command	Command to execute
-d, --device	Serial device path
-b, --baud	Baud rate
-t, --timeout	Timeout in seconds (default: 300)
--stream	Incremental output instead of buffered
--grep REGEX	Filter --stream lines by regex
--line-mode	Only yield complete lines in --stream
--parse REGEX	Show only matching lines
--end-flag STR	Stop when this string appears in output
--doctor	Clear foreground processes before command
--prompt PATTERN	Custom shell prompt pattern (repeatable)
--interrupt	Send Ctrl+C and wait for prompt
--probe	Detect serial boards and print info
--probe-baud BAUD	Baud rates to try during --probe (repeatable)
set-default	Persist device/baud as defaults

Design Goals

• Stability: strict 5-minute timeout on all blocking operations
• Simplicity: small surface area, obvious API
• Predictability: prompt detection to determine command completion
• Streaming: incremental output for long-running commands
• Parsing: structured output with optional regex filtering

Python API

import sdev

# Session-based (recommended)
with sdev.SerialSession("/dev/ttyUSB0", 115200) as session:
    result = session.cli("ls /proc/meminfo")
    print(result.output)

# Custom prompt detection for non-standard shells
session = sdev.SerialSession("/dev/ttyUSB0", 115200, prompts=[b"[root@board]# "])
session.connect()

# Streaming for long-running commands
for chunk in session.stream("tail -f /var/log/syslog"):
    print(chunk, end="")

# Streaming with line mode — only yields complete lines
for line in session.stream("tail -f /var/log/syslog", line_mode=True):
    process(line)

# Streaming with server-side filter
for chunk in session.stream("tail -f /var/log/syslog", filter_fn=lambda t: t.upper()):
    print(chunk, end="")

# Parsing with regex filtering
parsed = session.parse("cat /proc/meminfo", pattern=r"Mem.*")
print(parsed.matched)

# Wait for a specific output marker instead of shell prompt
# Useful for benchmarks that print results then keep running
result = session.cli("./mnn_perf -m model.mnn", end_flag="Frame rate:")

# Interrupt a running command (sends Ctrl+C and waits for prompt)
session.interrupt(timeout=5)

# Clear stray foreground processes and get a clean prompt
session.doctor()

# Wait until no data arrives for N seconds (boot completion)
session.wait_for_silence(timeout=1.5)

# Recover from device reboot without creating a new session
session.reconnect()

# Monitor CPU/memory during long operations
usage = sdev.resource_usage()
print(f"RSS: {usage['memory_mb']} MB, CPU: {usage['cpu_percent']}%")

# Detect serial boards and get OS/arch info
for device in sdev.probe():
    print(f"{device['device']} @ {device['baud']}: {device['info']['os_name']}")

# Send raw bytes over serial (control sequences, custom protocols)
sdev.connect("/dev/ttyUSB0", 115200)
n = sdev.write(b"reboot\n")
print(f"Wrote {n} bytes")

# Clear stray foreground processes on the default connection
sdev.doctor()

# Wait for boot completion (no serial data for N seconds)
sdev.wait_for_silence(timeout=2.0)

Thread safety

Each SerialSession has an internal threading.Lock. Only one cli() or stream() call can run at a time per session. Concurrent callers will raise RuntimeError after 10s if the lock is held. interrupt() does not acquire the lock — it remains the emergency escape hatch.

Module-level convenience API

sdev.connect("/dev/ttyUSB0", 115200)
result = sdev.cli("ls /proc/meminfo")
sdev.disconnect()

License

MIT