sdwire 0.3.0

CLI application to interact with Badgerd SDWire devices

CLI for Badgerd SDWire Devices

Application also supports legacy SDWireC and non-Badger'd sdwires as well as new Badgerd SDwire Gen2 devices.

Please see below for usage:

❯ sdwire --help
Usage: sdwire [OPTIONS] COMMAND [ARGS]...

Options:
--help  Show this message and exit.

Commands:
list
switch  dut/target => connects the sdcard interface to target device

❯ sdwire switch --help
Usage: sdwire switch [OPTIONS] COMMAND [ARGS]...

  dut/target => connects the sdcard interface to target device

  ts/host => connects the sdcard interface to host machine

  off => disconnects the sdcard interface from both host and target

Options:
  -s, --serial TEXT  Serial number of the sdwire device, if there is only one
                     sdwire connected then it will be used by default
  --help             Show this message and exit.

Commands:
  dut     dut/target => connects the sdcard interface to target device
  host    ts/host => connects the sdcard interface to host machine
  off     off => disconnects the sdcard interface from both host and target
  target  dut/target => connects the sdcard interface to target device
  ts      ts/host => connects the sdcard interface to host machine

Installing

Using pip

pip install sdwire

Using apt

sudo add-apt-repository ppa:tchavadar/badgerd
sudo apt install python3-sdwire

Listing SDWire Devices

sdwire list command will search through usb devices connected to the system and prints out the list of gen2 and legacy devices.

❯ sdwire list
Serial			Product Info
sdwire_gen2_101		[SDWire-Gen2::Badgerd Technologies]
bdgrd_sdwirec_522	[sd-wire::SRPOL]

Switching SD Card Connection

sdwire switch command switches the sd card connection to specified direction. If there is more than one sdwire connected to then you need specify which sdwire you want to alter with --serial or -s options.

If there is only one sdwire connected then you dont need to specify the serial, it will pick the one connected automatically. See the examples below.

❯ sdwire list
Serial			Product Info
sdwire_gen2_101		[SDWire-Gen2::Badgerd Technologies]
bdgrd_sdwirec_522	[sd-wire::SRPOL]

❯ sdwire switch -s bdgrd_sdwirec_522 target

❯ sdwire switch target
Usage: sdwire switch [OPTIONS] COMMAND [ARGS]...
Try 'sdwire switch --help' for help.

Error: There is more then 1 sdwire device connected, please use --serial|-s to specify!

❯ sdwire list
Serial			Product Info
bdgrd_sdwirec_522	[sd-wire::SRPOL]

❯ sdwire switch host