Skip to main content

SemViQA: A Semantic Question Answering System for Vietnamese Fact-Checking

Project description

SemViQA Logo

SemViQA: A Semantic Question Answering System for Vietnamese Information Fact-Checking

Authors:

Nam V. Nguyen, Dien X. Tran, Thanh T. Tran, Anh T. Hoang, Tai V. Duong, Di T. Le, Phuc-Lu Le

📌 About🔍 Checkpoints🚀 Quick Start🏋️‍♂️ Training📊 Evaluation📖 Citation


📌 About

Misinformation is a growing problem, exacerbated by the increasing use of Large Language Models (LLMs) like GPT and Gemini. This issue is even more critical for low-resource languages like Vietnamese, where existing fact-checking methods struggle with semantic ambiguity, homonyms, and complex linguistic structures.

To address these challenges, we introduce SemViQA, a novel Vietnamese fact-checking framework integrating:

  • Semantic-based Evidence Retrieval (SER): Combines TF-IDF with a Question Answering Token Classifier (QATC) to enhance retrieval precision while reducing inference time.
  • Two-step Verdict Classification (TVC): Uses hierarchical classification optimized with Cross-Entropy and Focal Loss, improving claim verification across three categories:
    • Supported
    • Refuted
    • Not Enough Information (NEI) 🤷‍♂️

🏆 Achievements

  • 1st place in the UIT Data Science Challenge 🏅
  • State-of-the-art performance on:
    • ISE-DSC0178.97% strict accuracy
    • ViWikiFC80.82% strict accuracy
  • SemViQA Faster: 7x speed improvement over the standard model 🚀

These results establish SemViQA as a benchmark for Vietnamese fact verification, advancing efforts to combat misinformation and ensure information integrity.


🔍 Checkpoints

We are making our SemViQA experiment checkpoints publicly available to support the Vietnamese fact-checking research community. By sharing these models, we aim to:

  • Facilitate reproducibility: Allow researchers and developers to validate and build upon our results.
  • Save computational resources: Enable fine-tuning or transfer learning on top of pre-trained and fine-tuned models instead of training from scratch.
  • Encourage further improvements: Provide a strong baseline for future advancements in Vietnamese misinformation detection.
Method Model ViWikiFC ISE-DSC01
TC InfoXLMlarge Link Link
XLM-Rlarge Link Link
Ernie-Mlarge Link Link
BC InfoXLMlarge Link Link
XLM-Rlarge Link Link
Ernie-Mlarge Link Link
QATC InfoXLMlarge Link Link
ViMRClarge Link Link
QA origin InfoXLMlarge Link Link
ViMRClarge Link Link

🚀 Quick Start

📥 Installation

1️⃣ Clone this repository

git clone https://github.com/DAVID-NGUYEN-S16/SemViQA.git
cd SemViQA

2️⃣ Set up Python environment

We recommend using Python 3.11 in a virtual environment (venv) or Anaconda.

Using venv:

python -m venv semviqa_env
source semviqa_env/bin/activate  # On MacOS/Linux
semviqa_env\Scripts\activate      # On Windows

Using Anaconda:

conda create -n semviqa_env python=3.11 -y
conda activate semviqa_env

3️⃣ Install dependencies

pip install --upgrade pip
pip install transformers==4.42.3
pip install torch==2.3.0 torchvision==0.18.0 torchaudio==2.3.0 --index-url https://download.pytorch.org/whl/cu118
pip install -r requirements.txt

🏋️‍♂️ Training

Train different components of SemViQA using the provided scripts:

1️⃣ Three-Class Classification Training

Train a three-class claim classification model using the following command:

bash scripts/tc.sh

If you want to fine-tune the model using pre-trained weights, you can initialize it as follows:

# Install semviqa
!pip install semviqa

# Initalize a pipeline
from transformers import AutoTokenizer
from semviqa.tvc.model import ClaimModelForClassification

tokenizer = AutoTokenizer.from_pretrained("SemViQA/tc-infoxlm-viwikifc")
model = ClaimModelForClassification.from_pretrained("SemViQA/tc-infoxlm-viwikifc", num_labels=3)

2️⃣ Binary Classification Training

Train a binary classification model using the command below:

bash scripts/bc.sh

To fine-tune the model with existing weights, use the following setup:

# Install semviqa
!pip install semviqa

# Initalize a pipeline
from transformers import AutoTokenizer
from semviqa.tvc.model import ClaimModelForClassification

tokenizer = AutoTokenizer.from_pretrained("SemViQA/bc-infoxlm-viwikifc")
model = ClaimModelForClassification.from_pretrained("SemViQA/bc-infoxlm-viwikifc", num_labels=2)

3️⃣ QATC Model Training

Train the Question Answering Token Classifier (QATC) model using the following command:

bash scripts/qatc.sh

To continue training from pre-trained weights, use this setup:

# Install semviqa
!pip install semviqa

# Initalize a pipeline
from transformers import AutoTokenizer
from semviqa.ser.qatc_model import QATCForQuestionAnswering

tokenizer = AutoTokenizer.from_pretrained("SemViQA/qatc-infoxlm-viwikifc")
model = QATCForQuestionAnswering.from_pretrained("SemViQA/qatc-infoxlm-viwikifc")

📊 Evaluation

1️⃣ Semantic-based Evidence Retrieval

This module extracts the most relevant evidence from a given context based on a claim. It leverages TF-IDF combined with the QATC model to ensure accurate retrieval.

# Install semviqa package
!pip install semviqa

# Import the ser module
import torch
from transformers import AutoTokenizer
from semviqa.ser.qatc_model import QATCForQuestionAnswering
from semviqa.ser.ser_eval import extract_evidence_tfidf_qatc

device = torch.device("cuda" if torch.cuda.is_available() else "cpu")

tokenizer = AutoTokenizer.from_pretrained("SemViQA/qatc-infoxlm-viwikifc")
model = QATCForQuestionAnswering.from_pretrained("SemViQA/qatc-infoxlm-viwikifc")

claim = "Chiến tranh với Campuchia đã kết thúc trước khi Việt Nam thống nhất."
context = "Sau khi thống nhất, Việt Nam tiếp tục gặp khó khăn do sự sụp đổ và tan rã của đồng minh Liên Xô cùng Khối phía Đông, các lệnh cấm vận của Hoa Kỳ, chiến tranh với Campuchia, biên giới giáp Trung Quốc và hậu quả của chính sách bao cấp sau nhiều năm áp dụng. Năm 1986, Đảng Cộng sản ban hành cải cách đổi mới, tạo điều kiện hình thành kinh tế thị trường và hội nhập sâu rộng. Cải cách đổi mới kết hợp cùng quy mô dân số lớn đưa Việt Nam trở thành một trong những nước đang phát triển có tốc độ tăng trưởng thuộc nhóm nhanh nhất thế giới, được coi là Hổ mới châu Á dù cho vẫn gặp phải những thách thức như tham nhũng, tội phạm gia tăng, ô nhiễm môi trường và phúc lợi xã hội chưa đầy đủ. Ngoài ra, giới bất đồng chính kiến, chính phủ một số nước phương Tây và các tổ chức theo dõi nhân quyền có quan điểm chỉ trích hồ sơ nhân quyền của Việt Nam liên quan đến các vấn đề tôn giáo, kiểm duyệt truyền thông, hạn chế hoạt động ủng hộ nhân quyền cùng các quyền tự do dân sự."

evidence = extract_evidence_tfidf_qatc(
    claim, context, model, tokenizer, device, confidence_threshold=0.5, length_ratio_threshold=0.6
)

print(evidence)
# evidence: sau khi thống nhất việt nam tiếp tục gặp khó khăn do sự sụp đổ và tan rã của đồng minh liên xô cùng khối phía đông các lệnh cấm vận của hoa kỳ chiến tranh với campuchia biên giới giáp trung quốc và hậu quả của chính sách bao cấp sau nhiều năm áp dụng

2️⃣ Two-step Verdict Classification

This module performs claim classification using a two-step approach:

  1. Three-class classification: Determines if a claim is Supported, Refuted, or Not Enough Information (NEI).
  2. Binary classification (if necessary): Further verifies if the claim is Supported or Refuted.
# Install semviqa package
!pip install semviqa

# Import the tvc module
import torch
from semviqa.tvc.tvc_eval import classify_claim
from semviqa.tvc.model import ClaimModelForClassification

device = torch.device("cuda" if torch.cuda.is_available() else "cpu")

tokenizer = AutoTokenizer.from_pretrained("SemViQA/tc-infoxlm-viwikifc")
model_tc = ClaimModelForClassification.from_pretrained("SemViQA/tc-infoxlm-viwikifc", num_labels=3).to(device)
model_bc = ClaimModelForClassification.from_pretrained("SemViQA/bc-infoxlm-viwikifc", num_labels=2).to(device)

claim = "Chiến tranh với Campuchia đã kết thúc trước khi Việt Nam thống nhất."
evidence = "Sau khi thống nhất, Việt Nam tiếp tục gặp khó khăn do sự sụp đổ và tan rã của đồng minh Liên Xô cùng Khối phía Đông, các lệnh cấm vận của Hoa Kỳ, chiến tranh với Campuchia, biên giới giáp Trung Quốc và hậu quả của chính sách bao cấp sau nhiều năm áp dụng."

verdict = "NEI"
prob_tc, pred_tc = classify_claim(claim, evidence, model_tc, tokenizer, device)

if pred_tc != 0:
  prob_bc, pred_bc = classify_claim(claim, evidence, model_bc, tokenizer, device)
  verdict = "SUPPORTED" if pred_bc == 0 else "REFUTED" if prob_bc > prob_tc else ["NEI", "SUPPORTED", "REFUTED"][pred_tc]

print(verdict)
# Output: REFUTED

3️⃣ Full Pipeline Evaluation

Use the trained models to predict test data:

bash scripts/pipeline.sh

Alternatively, you can use SemViQA programmatically:

# Install semviqa package
!pip install semviqa

# Import the pipeline
from semviqa.pipeline import SemViQAPipeline
claim = "Chiến tranh với Campuchia đã kết thúc trước khi Việt Nam thống nhất."
context = "Sau khi thống nhất, Việt Nam tiếp tục gặp khó khăn do sự sụp đổ và tan rã của đồng minh Liên Xô cùng Khối phía Đông, các lệnh cấm vận của Hoa Kỳ, chiến tranh với Campuchia, biên giới giáp Trung Quốc và hậu quả của chính sách bao cấp sau nhiều năm áp dụng. Năm 1986, Đảng Cộng sản ban hành cải cách đổi mới, tạo điều kiện hình thành kinh tế thị trường và hội nhập sâu rộng. Cải cách đổi mới kết hợp cùng quy mô dân số lớn đưa Việt Nam trở thành một trong những nước đang phát triển có tốc độ tăng trưởng thuộc nhóm nhanh nhất thế giới, được coi là Hổ mới châu Á dù cho vẫn gặp phải những thách thức như tham nhũng, tội phạm gia tăng, ô nhiễm môi trường và phúc lợi xã hội chưa đầy đủ. Ngoài ra, giới bất đồng chính kiến, chính phủ một số nước phương Tây và các tổ chức theo dõi nhân quyền có quan điểm chỉ trích hồ sơ nhân quyền của Việt Nam liên quan đến các vấn đề tôn giáo, kiểm duyệt truyền thông, hạn chế hoạt động ủng hộ nhân quyền cùng các quyền tự do dân sự."
 
semviqa = SemViQAPipeline(
  model_evidence_QA="SemViQA/qatc-infoxlm-viwikifc", 
  model_bc="SemViQA/bc-infoxlm-viwikifc", 
  model_tc="SemViQA/tc-infoxlm-viwikifc", 
  thres_evidence=0.5,
  length_ratio_threshold=0.5,
  is_qatc_faster=False
  )
 
result = semviqa.predict(claim, context)
print(result)
# Output: {'verdict': 'REFUTED', 'evidence': 'sau khi thống nhất việt nam tiếp tục gặp khó khăn do sự sụp đổ và tan rã của đồng minh liên xô cùng khối phía đông các lệnh cấm vận của hoa kỳ chiến tranh với campuchia biên giới giáp trung quốc và hậu quả của chính sách bao cấp sau nhiều năm áp dụng'}

# Extract only evidence
evidence_only = semviqa.predict(claim, context, return_evidence_only=True)
print(evidence_only)
# Output: {'evidence': 'sau khi thống nhất việt nam tiếp tục gặp khó khăn do sự sụp đổ và tan rã của đồng minh liên xô cùng khối phía đông các lệnh cấm vận của hoa kỳ chiến tranh với campuchia biên giới giáp trung quốc và hậu quả của chính sách bao cấp sau nhiều năm áp dụng'}

Acknowledgment

Our development is based on our previous works:

SemViQA is the final version we have developed for verifying fact-checking in Vietnamese, achieving state-of-the-art (SOTA) performance compared to any other system for Vietnamese.

📖 Citation

If you use SemViQA in your research, please cite our work:

@misc{nguyen2025semviqasemanticquestionanswering,
      title={SemViQA: A Semantic Question Answering System for Vietnamese Information Fact-Checking}, 
      author={Nam V. Nguyen and Dien X. Tran and Thanh T. Tran and Anh T. Hoang and Tai V. Duong and Di T. Le and Phuc-Lu Le},
      year={2025},
      eprint={2503.00955},
      archivePrefix={arXiv},
      primaryClass={cs.CL},
      url={https://arxiv.org/abs/2503.00955}, 
}

Project details


Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

semviqa-1.0.9.tar.gz (28.1 kB view details)

Uploaded Source

Built Distribution

If you're not sure about the file name format, learn more about wheel file names.

semviqa-1.0.9-py2.py3-none-any.whl (26.5 kB view details)

Uploaded Python 2Python 3

File details

Details for the file semviqa-1.0.9.tar.gz.

File metadata

  • Download URL: semviqa-1.0.9.tar.gz
  • Upload date:
  • Size: 28.1 kB
  • Tags: Source
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/6.1.0 CPython/3.11.0

File hashes

Hashes for semviqa-1.0.9.tar.gz
Algorithm Hash digest
SHA256 fcbcd98014a749814dcf371d4858650208455ea11b77ea9992575e9300c351cf
MD5 9a0da20b325c690c21b6446a2446b8b1
BLAKE2b-256 60b41d44ad88c8f47ec8a43dfbc9ad2f769b2c325dc9516eb7535c70f07252bc

See more details on using hashes here.

File details

Details for the file semviqa-1.0.9-py2.py3-none-any.whl.

File metadata

  • Download URL: semviqa-1.0.9-py2.py3-none-any.whl
  • Upload date:
  • Size: 26.5 kB
  • Tags: Python 2, Python 3
  • Uploaded using Trusted Publishing? No
  • Uploaded via: twine/6.1.0 CPython/3.11.0

File hashes

Hashes for semviqa-1.0.9-py2.py3-none-any.whl
Algorithm Hash digest
SHA256 b606fc3fbb255a1ec30781009102f6a7fc8541557e3869bd80e7c964ad0468a9
MD5 8c4a5e47cbe74070277568793b06bab4
BLAKE2b-256 0c0d6771f2872a59edfbc27a711d5fef9f88a3fb2baf9f6b1326ef9349fbbcad

See more details on using hashes here.

Supported by

AWS Cloud computing and Security Sponsor Datadog Monitoring Depot Continuous Integration Fastly CDN Google Download Analytics Pingdom Monitoring Sentry Error logging StatusPage Status page