serialcables-sphinx 0.4.0

MCTP and NVMe-MI protocol library for Serial Cables hardware

serialcables-sphinx

MCTP and NVMe-MI protocol library for Serial Cables HYDRA enclosures.

Sphinx handles the protocol layer (MCTP framing, NVMe-MI encoding/decoding) while HYDRA handles the transport layer (serial communication with hardware). Together they provide a complete end-to-end solution for NVMe Management Interface communication.

Supports NVMe-MI 1.2 (PCIe Gen5) and NVMe-MI 2.x (PCIe Gen6+) specifications with automatic version detection.

Architecture

┌─────────────────────────────────────────────────────────────┐
│              Host Application                               │
│    (Prometheus UI, LabView, pytest, Jenkins, scripts)       │
├─────────────────────────────────────────────────────────────┤
│                  serialcables-sphinx                        │
│    • MCTP packet building        • NVMe-MI decoding         │
│    • NVMe-MI request encoding    • Human-readable output    │
├─────────────────────────────────────────────────────────────┤
│                  serialcables-hydra                         │
│    • Serial communication        • Slot/mux management      │
│    • Raw packet transport        • Device enumeration       │
├─────────────────────────────────────────────────────────────┤
│                  HYDRA Hardware                             │
│    • MCU + Serial Mux            • I2C/SMBus to DUTs       │
└─────────────────────────────────────────────────────────────┘

Installation

pip install serialcables-sphinx

This automatically installs serialcables-hydra as a dependency.

Quick Start

With Real HYDRA Hardware

from serialcables_hydra import JBOFController
from serialcables_sphinx import Sphinx
from serialcables_sphinx.transports.hydra import HYDRATransport

# Connect to HYDRA enclosure
jbof = JBOFController(port="/dev/ttyUSB0")  # or "COM3" on Windows

# Create transport adapter for slot 1
transport = HYDRATransport(jbof, slot=1)

# Create Sphinx protocol handler
sphinx = Sphinx(transport)

# Poll NVM Subsystem Health Status
result = sphinx.nvme_mi.health_status_poll(eid=1)

if result.success:
    print(result.pretty_print())
else:
    print(f"Error: {result.status}")

With Mock Transport (Testing)

from serialcables_sphinx import Sphinx
from serialcables_sphinx.transports.mock import MockTransport

# Create mock transport (no hardware needed)
mock = MockTransport()

# Optionally configure simulated device state
mock.set_temperature(45)  # 45°C
mock.state.available_spare = 90

# Use identically to real hardware
sphinx = Sphinx(mock)
result = sphinx.nvme_mi.health_status_poll(eid=1)
print(result.pretty_print())

Features

Firmware Shortcuts (HYDRA v0.0.6+)

For quick access to common data, use the firmware shortcuts that handle MCTP protocol internally:

from serialcables_sphinx import MCTPShortcuts, create_shortcuts

# Quick setup
shortcuts = create_shortcuts("COM13")  # or "/dev/ttyUSB0"

# Get serial number
sn = shortcuts.get_serial_number(slot=1)
print(f"Serial: {sn.serial_number}")

# Get health status with quick-access values
health = shortcuts.get_health_status(slot=1)
print(f"Temperature: {health.temperature_celsius}°C")
print(f"Available Spare: {health.available_spare}%")
print(f"Is Healthy: {health.is_healthy}")

# Full Sphinx decoding also available
if health.decoded:
    print(health.decoded.pretty_print())

# Scan all slots
for result in shortcuts.scan_all_slots():
    if result.success:
        print(f"Slot {result.slot}: {result.serial_number}")

# Health summary
shortcuts.print_health_summary()

CLI tool for shortcuts:

sphinx-shortcuts --port COM13 serial 1           # Get serial number
sphinx-shortcuts --port COM13 health 1           # Get health status
sphinx-shortcuts --port COM13 health 1 --full    # Full decoded output
sphinx-shortcuts --port COM13 scan               # Scan all slots
sphinx-shortcuts --port COM13 health-all --json  # JSON output

High-Level API

Simple methods for common NVMe-MI operations:

# Health monitoring
health = sphinx.nvme_mi.health_status_poll(eid=1)
print(f"Temperature: {health['Composite Temperature']}")
print(f"Spare: {health['Available Spare']}")

# Controller enumeration
controllers = sphinx.nvme_mi.get_controller_list(eid=1)
for ctrl_id in controllers['Controller IDs']:
    ctrl_health = sphinx.nvme_mi.controller_health_status(eid=1, controller_id=ctrl_id)
    print(ctrl_health.pretty_print())

# Subsystem information
info = sphinx.nvme_mi.get_subsystem_info(eid=1)
print(f"NVMe-MI Version: {info['NVMe-MI Version']}")

Mid-Level API

Build and decode packets explicitly (useful for debugging):

from serialcables_sphinx import NVMeMIOpcode

# Build packet
packet = sphinx.mctp.build_nvme_mi_request(
    dest_eid=1,
    opcode=NVMeMIOpcode.NVM_SUBSYSTEM_HEALTH_STATUS_POLL
)
print(f"TX: {packet.hex(' ')}")

# Send raw bytes via HYDRA
response_bytes = hydra.send_packet(packet)
print(f"RX: {response_bytes.hex(' ')}")

# Decode response
decoded = sphinx.nvme_mi.decode(
    response_bytes, 
    NVMeMIOpcode.NVM_SUBSYSTEM_HEALTH_STATUS_POLL
)
print(decoded.pretty_print())

Low-Level API

Full control over MCTP framing:

# Build custom MCTP packet
packet = sphinx.mctp.build_raw(
    dest_eid=1,
    src_eid=0,
    msg_type=0x04,  # NVMe-MI
    payload=bytes([0x01, 0x00, 0x00, 0x00]),
    som=True,
    eom=True
)

Message Fragmentation

The library handles MCTP message fragmentation for payloads exceeding packet size limits:

from serialcables_sphinx.mctp import (
    MCTPBuilder,
    FragmentationConstants,
    FragmentedMessage,
)

# Hardware constraints
print(f"Max TX packet: {FragmentationConstants.MAX_TX_PACKET_SIZE} bytes")  # 128
print(f"Max RX packet: {FragmentationConstants.MAX_RX_PACKET_SIZE} bytes")  # 256
print(f"Max TX payload: {FragmentationConstants.MAX_TX_PAYLOAD} bytes")     # 120

# Check if fragmentation needed
builder = MCTPBuilder()
large_payload = bytes(300)
print(f"Needs fragmentation: {builder.needs_fragmentation(large_payload)}")
print(f"Fragment count: {builder.calculate_fragment_count(large_payload)}")

# Build fragmented message
result = builder.build_fragmented(
    dest_eid=1,
    msg_type=0x04,
    payload=large_payload,
)

# Send with timing control
for fragment in result.fragments:
    transport.send_packet(fragment.data)
    time.sleep(0.005)  # 5ms inter-fragment delay

Fragmentation parameters:

• TX limit: 128 bytes per packet (hardware constraint)
• RX limit: 256 bytes per packet (MCU memory constraint)
• Timing: Fragments must arrive within ~100ms for device reassembly
• Sequence: 2-bit counter (0-3) wraps for messages > 4 fragments

Output Formats

# Human-readable (for debugging)
print(result.pretty_print())

# Dictionary (for JSON APIs)
data = result.to_dict()

# Direct field access
temp = result['Composite Temperature']
spare = result.get('Available Spare', 'N/A')

# One-line summary
print(result.summary())  # "[✓] NVM_SUBSYSTEM_HEALTH_STATUS_POLL: SUCCESS (0x00)"

CLI Tool

Decode packets from the command line:

# Decode a captured response
sphinx-decode --opcode 0x01 "20 f 11 3b 1 0 0 c4 84 80 0 0 45 0 0 ca 1e a0 90 a0"

# Output as JSON
sphinx-decode --opcode 0x01 --json "20 f 11 3b ..."

Supported NVMe-MI Commands

NVMe-MI 1.2 Commands

Opcode	Command	Decode Support
0x00	Read NVMe-MI Data Structure	✓
0x01	NVM Subsystem Health Status Poll	✓
0x02	Controller Health Status Poll	✓
0x03	Configuration Set	✓
0x04	Configuration Get	✓
0x05	VPD Read	✓
0x06	VPD Write	✓
0x07	MI Reset	✓
0x08	SES Receive	Planned
0x09	SES Send	Planned
0x0D	MI Send	✓
0x0E	MI Receive	✓
0xC0+	Vendor Specific	Extensible

NVMe-MI 2.x Commands (PCIe Gen6+)

Opcode	Command	Decode Support
0x10	Get Boot Partition Configuration	✓
0x11	Set Boot Partition Configuration	✓
0x12	Get Security State	✓
0x13	Set Security State	✓
0x14	Security Send	✓
0x15	Security Receive	✓
0x20	MI Get Features (2.1+)	✓
0x21	MI Set Features (2.1+)	✓

Version Detection

Sphinx automatically detects device NVMe-MI version and uses appropriate response formats:

from serialcables_sphinx.nvme_mi import DeviceCapabilities, NVMeMIVersion

# Query device capabilities
info = sphinx.nvme_mi.get_subsystem_info(eid=1)
caps = DeviceCapabilities.from_subsystem_info(info)

print(f"NVMe-MI Version: {caps.nvme_mi_version}")  # e.g., "2.0"
print(f"Is Gen6+: {caps.is_nvme_mi_2x}")
print(f"Supports Admin Tunneling: {caps.supports_admin_tunneling}")

Admin Command Tunneling

Tunnel NVMe Admin commands through NVMe-MI:

from serialcables_sphinx.nvme_mi import CommandCapsule, MISendRequest

# NVMe-MI 2.x style (Command Capsule)
capsule = CommandCapsule.identify_controller()
capsule = CommandCapsule.get_smart_log()

# NVMe-MI 1.2 style (MI Send/Receive)
mi_send = MISendRequest(opcode=AdminOpcode.IDENTIFY, dwords=dwords)

Vendor Extensions

Register custom decoders for vendor-specific commands:

from serialcables_sphinx import DecoderRegistry, ResponseDecoder

@DecoderRegistry.register(opcode=0xC0, vendor_id=0x1234)
class MyVendorDecoder(ResponseDecoder):
    def decode(self, data: bytes, response):
        self._add_field(response, "Custom Field", data[0], data[0:1])
        return response

# Use with vendor ID
sphinx = Sphinx(hydra, vendor_id=0x1234)

Integration Examples

pytest

import pytest
from serialcables_sphinx import Sphinx
from serialcables_sphinx.transports.mock import MockTransport

# For unit tests, use mock transport
@pytest.fixture
def sphinx():
    mock = MockTransport()
    return Sphinx(mock)

def test_temperature_in_range(sphinx):
    result = sphinx.nvme_mi.health_status_poll(eid=1)
    assert result.success
    # Check decoded temperature field
    temp_str = result['Composite Temperature']
    assert "°C" in temp_str

# For hardware integration tests
@pytest.fixture
def sphinx_hardware():
    from serialcables_sphinx.transports.hydra import create_hydra_transport
    transport = create_hydra_transport("/dev/ttyUSB0", slot=1)
    return Sphinx(transport)

LabView

Use Python Node to import and call Sphinx methods, returning dict/JSON to LabView.

Jenkins Pipeline

stage('NVMe-MI Health Check') {
    steps {
        sh '''
            python -c "
from serialcables_hydra import HYDRADevice
from serialcables_sphinx import Sphinx
sphinx = Sphinx(HYDRADevice('/dev/ttyUSB0'))
result = sphinx.nvme_mi.health_status_poll(eid=1)
assert result.success, f'Health check failed: {result.status}'
print(result.pretty_print())
"
        '''
    }
}

Requirements

• Python 3.9+
• serialcables-hydra >= 0.1.0

License

MIT License - see LICENSE file for details.

Links

• Serial Cables
• HYDRA Documentation
• NVMe-MI Specification
• MCTP Specification (DMTF DSP0236)