sifi-bridge-py 2.0.0b16

Python bindings for the SiFi Bridge tool.

SiFi Bridge Python

A Python wrapper over the SiFi Bridge CLI for talking to SiFi Labs devices (BioPoint, SiFiBand). Spawns sifibridge as a subprocess, drives it via its REPL, and delivers sensor data over a local TCP socket — so your code reads typed Python objects instead of parsing JSON lines.

Installing

pip install sifi-bridge-py

The sifibridge CLI binary ships bundled per platform via the sifibridge-bin wheel; no separate install is needed on Linux (x86_64, aarch64), macOS (x86_64, arm64), or Windows (x86_64).

Quickstart

from sifi_bridge_py import SifiBridge

with SifiBridge() as sb:
    # Block until a device is found (sb.connect() returns False on no-match)
    while not sb.connect():
        pass

    sb.configure_sensors(emg=True)
    sb.configure_emg(fs=1000, mains_notch=60)

    sb.start()
    for _ in range(50):
        packet = sb.get_emg(timeout=2.0)
        if not packet:
            continue   # timed out, no data this tick
        print(packet["sample_rate"], packet["data"]["emg"][:4])
    sb.stop()

SifiBridge is a context manager — leaving the with block closes the data socket and shuts down the subprocess. If you can't use with, call sb.close() explicitly when done.

API tour

Lifecycle

• SifiBridge(use_lsl=False) spawns the CLI; pass use_lsl=True to also stream data to Lab Streaming Layer.
• sb.close() (or with block exit) terminates the subprocess.

Discovery & connection

• sb.list_devices(ListSources.BLE) / .SERIAL / .DEVICES returns the names sifibridge can see.
• sb.connect() connects to any available device. Pass a DeviceType, a MAC address (Linux/Windows), or a CoreBluetooth UUID (macOS) to target a specific one. Returns True on success, False if no device matched in time (safe to retry in a loop).
• sb.select_device(name) / sb.get_active_device() / sb.show() introspect the current session.

Sensor configuration

• sb.configure_sensors(ecg=…, emg=…, eda=…, imu=…, ppg=…) toggles which sensors stream.
• sb.configure_ecg(...), configure_emg(...), configure_eda(...), configure_imu(...), configure_ppg(...) set per-sensor sampling rate, filtering, ranges, etc.
• sb.set_onboard_filtering(enable) turns the device's onboard filtering on/off globally.
• sb.set_memory_mode(MemoryMode.STREAMING | DEVICE | BOTH) controls whether data streams over BLE, lands on onboard flash, or both.

Acquisition & data

• sb.start() / sb.stop() toggle streaming.
• sb.get_ecg(timeout=…), get_emg, get_eda, get_imu, get_ppg, get_temperature pop the next packet of that sensor. Each sensor has its own internal queue, so calling get_ecg() does not drop EMG data that arrived in between. Returns {} on timeout. NOTE: each packet is also routed to a generic queue read by get_data() — don't mix the two APIs on the same instance, or you'll see duplicates.
• sb.clear_data_buffer() drains all internal queues.

Onboard memory

• sb.start_memory_download(timeout=10.0) triggers a memory dump; pull memory packets via get_data() and check sb.is_memory_download_completed(packet).
• sb.buffer_export(fmt="csv"|"hdf5", output_dir=...) writes buffered acquisitions to disk.
• sb.erase_onboard_memory() wipes the device's flash.

Device controls (no REPL escape hatch needed)

• sb.set_led(index, on), sb.set_motor(on), sb.set_motor_intensity(level)
• sb.power_off(), sb.reset_to_default_config()
• sb.start_status_updates() / stop_status_updates()
• sb.get_memory_size(), sb.get_device_info() — reply asynchronously as status packets on the data channel.
• sb.set_ble_power(BleTxPower.LOW|MEDIUM|HIGH), sb.set_night_mode(on), sb.set_low_latency_mode(on)

Software events

• sb.send_event() emits a software event on the device — useful for marking experiment timestamps.

Error handling

from sifi_bridge_py import SifiBridgeError, SifiBridgeTimeout

• ConnectionError — Bluetooth adapter is off or unavailable. Raised by connect() and list_devices().
• SifiBridgeTimeout (subclass of SifiBridgeError) — the CLI didn't reply within the timeout. Retry-friendly. connect() already catches this internally and returns False.
• SifiBridgeError — the CLI returned an explicit {"error": ...} response. Indicates malformed input or an unsupported operation; fix the call rather than retrying.

Catch SifiBridgeTimeout specifically when you want to distinguish "still trying" from "broken":

try:
    sb.configure_emg(fs=1000)
except SifiBridgeTimeout:
    # CLI is wedged — back off and retry
    ...
except SifiBridgeError as e:
    # Bad arguments — surface to the user
    raise

Examples

Examples are available on our documentation website.

Advanced usage

The wrapper exposes the common surface, but the underlying CLI has more. To explore, run sifibridge interactively and type help — anything you find there can also be reached from Python by subclassing SifiBridge and calling self._request("…") directly. The REPL command reference is documented in SiFiLabs/sifi-bridge-pub.

Tests

python -m unittest -v

Tests do not need a connected device. Some assertions exercise live REPL responses, so the bundled sifibridge binary must be runnable on your platform.

Versioning

The wrapper is updated for every SiFi Bridge release. Major and minor versions are kept in lockstep with the CLI; patch versions vary for project-specific fixes.

Local development

See DEVELOPMENT.md for setup. The short version:

export SIFIBRIDGE_EXE=./sifibridge   # point to a local CLI build
uv sync

Deployment

NOTE: If you add new enums or types, re-export them in sifi_bridge_py/__init__.py.

Publishing sifibridge-bin

1. Update version in sifibridge-bin/pyproject.toml
2. Build wheels: cd sifibridge-bin && python scripts/build_wheels.py <release-tag>
3. Publish: uv publish dist/* or push a bin-<version> tag

Publishing sifi-bridge-py

1. Update version in pyproject.toml (and the sifibridge-bin pin if needed)
2. Run tests: python -m unittest -v
3. Push a version tag (e.g. 2.0.0-b9) to main — CI handles the rest

sifibridge-bin must be on PyPI before publishing a sifi-bridge-py version that depends on it.