Skip to main content

signafaide

Audit evidence of what your AI agents did, for EU AI Act record-keeping, ISO/IEC 42001 and SOC 2. Each record is signed with the agent's own key and chained on your machine; once you opt in, a witness (the signafAIde service, or one you host) co-signs and publicly timestamps it, so neither side can forge or edit a record alone.

  • Nothing is sent until a person runs signafaide init or sets SIGNAFAIDE_API_KEY. After that each record sends its content hash with its tool name, agent name and time (and its chain links), never its inputs or outputs unless you turn on stored content. Tool and agent names are sent as you write them, so don't put personal data in them. Each content hash is salted with 16 random bytes that stay on your machine with the content, so the hash alone cannot be used to guess the content, even when it has only a few possible values.
  • The sandbox init creates needs no account, email or card.
  • To keep the evidence in your environment, self-host the witness and set SIGNAFAIDE_URL (self-host).
  • Apache-2.0, with a public protocol spec and an independent verifier.
uv add signafaide                 # a uv project
poetry add signafaide             # a Poetry project
python3 -m venv .venv && .venv/bin/python -m pip install signafaide   # otherwise, then add it to requirements.txt

Not a bare pip install: most systems' Python refuses it outside a virtual environment (PEP 668, "externally-managed-environment").

import signafaide

@signafaide.record
def approve_payout(claim_id: str, amount: float): ...
signafaide verify                 # or .venv/bin/signafaide verify, uv run signafaide verify

That's it. With no API key, records are signed, chained and kept in .signafaide/, and nothing is sent. signafaide verify checks every signature, chain link and content hash and ends with a result line that says how many of the 12 checks ran, for example PASS: 4 of 12 checks passed, 8 not checked (nothing co-signed yet). A check that was not run is never counted as passed. It also says what still needs the witness:

co-signature, public timestamp: not yet. Run `signafaide init` to send hashes, or self-host (SIGNAFAIDE_URL)

Sending hashes to a witness

Co-signature and the public timestamp need a witness. A person opts in once:

  • signafaide init creates a free sandbox (no account, email or card), saves SIGNAFAIDE_API_KEY to .env, adds .env to .gitignore and prints a link to claim it, with what claiming gives and how long an unclaimed sandbox is kept (below); or
  • set SIGNAFAIDE_API_KEY (a live key from the console), with SIGNAFAIDE_URL for a self-hosted witness. SIGNAFAIDE_URL alone sends nothing.

init says what the claim link is for and how long it is good for:

sandbox ready at https://api.signafaide.co.uk, key saved to /work/claims/.env; claim it at https://signafaide.co.uk/app/claim/3fK9...
claiming is free and needs no card: the sandbox moves into your own organisation and stops expiring, and you get the console, live keys and auditor links
30 days left: an unclaimed sandbox and its records on the service are deleted on 15 December 2026. Records on this machine are kept and still verify

signafaide status, signafaide claim and a passing signafaide verify repeat the link with the days left, counted from what the witness says (expires_at); a witness that does not say gets no line about days. verify --json has the same as data (sandbox: {claim_url, claimed, expires_at, days_left}). Once the sandbox is claimed, status shows claim: done (this sandbox belongs to an organisation now) and nothing counts down. An unclaimed sandbox past its date is deleted from the service within a day and its key is then refused (invalid_key); the records on this machine are kept and still verify, and the same commands say how to carry on: remove SIGNAFAIDE_API_KEY from .env, run signafaide init for a new sandbox and claim it.

Records written before the opt-in ship afterwards with their original times. The service accepts records up to 7 days old (an agent key's valid_from is at most 7 days before its registration); a local chain that starts earlier stays local, still verifies, and signafaide flush reports it as too_old. signafaide.init() in code only configures: it never creates a sandbox.

What a call records

  1. A decision record before the function runs: the tool name, plus {"input": {<argument>: <value>}, "meta": {...}}.
  2. The function runs.
  3. An outcome record after it: {"output": ...}, or {"error": {"type", "message"}}. The error is raised again unchanged.

Records are signed and chained locally in .signafaide/ (synchronously, in a couple of milliseconds), then, once you opted in, shipped in the background. Sync and async functions both work.

@signafaide.record(agent="claims-bot", name="approve_payout", meta={"model": "gpt-x"})
def approve(claim_id: str, amount: float): ...

signafaide.note("policy_loaded", {"version": 3})   # anything that is not a tool call

Give each agent an explicit name, for example @signafaide.record(agent="claims-bot"); without one it is the project folder's name. It must match ^[a-z0-9][a-z0-9._-]{0,63}$. In production, one agent name is one chain written by one running instance.

Frameworks

tools = signafaide.wrap_tools({"lookup_order": lookup_order, "refund": refund})   # dict: key = name
tools = signafaide.wrap_tools([lookup_order, refund])                             # list

wrap_tools (and wrap_tool for one) also takes:

  • LangChain tools (@tool or any BaseTool). The copy records each invoke / ainvoke, including tool calls, and still converts for bind_tools. The outcome holds the tool's own return value, not the ToolMessage LangChain wraps it in.
  • OpenAI Agents SDK FunctionTools (@function_tool). The copy records on_invoke_tool.
from agents import Agent, function_tool

@function_tool
def lookup_order(order_id: str) -> str: ...

agent = Agent(name="support", tools=signafaide.wrap_tools([lookup_order]))

Neither framework is a dependency: wrap_tools recognises the objects by their shape.

Recording everything an agent can call

Wrapping records the tools you wrap. Two things cover the rest: the gateway records every MCP tool call with no wrapper at all, and a tool declaration says in the chain which tools the agent has and which of them are recorded.

MCP tools: the gateway. It is part of the signafaide npm package (Node.js 18 or later) and works with an agent written in any language. In the agent's MCP configuration, start the gateway in place of the server:

{"command": "npx", "args": ["-y", "signafaide", "gateway", "--agent", "support-bot", "--", "npx", "-y", "@modelcontextprotocol/server-filesystem", "/data"]}

It runs the server, relays every message unchanged, declares the server's tools as recorded, and writes a decision before each tools/call is forwarded and an outcome when the answer arrives, into the same .signafaide/ folder this SDK uses. A call that cannot be recorded is not forwarded. --strict (or --strict-tools a,b) forwards a call only once the witness has co-signed its decision; --name-prefix github. keeps the tool names of several servers apart; --store-content sends inputs and outputs too. A remote (HTTP) server goes behind a stdio bridge such as mcp-remote:

npx -y signafaide gateway --agent support-bot -- npx -y mcp-remote https://mcp.example.com/mcp

Framework tools: tool declarations. wrap_tools declares the tools it wraps as recorded, with the first recorded call. Give the full list of the tools your code hands the agent, and the ones you did not wrap are declared as not recorded:

tools = signafaide.wrap_tools([refund, lookup_order], agent="support-bot")
signafaide.declare_tools(["refund", "lookup_order", "web_search"], agent="support-bot")   # web_search is not wrapped

signafaide verify then has a coverage line for each agent: all 3 declared tools are recorded, or 1 declared tool is not recorded: web_search, or that no tool list was declared. It is a note, never a failure. A declaration is one signed note for the list and one for each tool in the agent's chain, so n tools are n + 1 records, counted like every other record, each time a process starts or the list changes. declare_tools=False or SIGNAFAIDE_DECLARE_TOOLS=0 turns off the one wrap_tools writes.

What this shows, and what it does not. The gateway records every call that goes through it; a call the application makes around it is still not recorded, so the deployment has to make the gateway the only route to those tools. A declaration is the program's own signed statement of its tools: evidence of what it said it had, not proof that the list is complete. A tool list is as fresh as its last declaration: a source that stops (a gateway that is removed, a program that ends) leaves the list at its clean exit, or within 24 hours after a crash.

OpenTelemetry: records from the traces you already have

An agent that is already traced with OpenTelemetry gets records with no tool wrapping. Install the extra and add one span processor where tracing is set up:

uv add "signafaide[otel]"         # or .venv/bin/python -m pip install "signafaide[otel]"
from signafaide.otel import SignafaideSpanProcessor

provider.add_span_processor(SignafaideSpanProcessor())   # provider: your TracerProvider

To record every call, give the provider an always-on sampler, TracerProvider(sampler=ALWAYS_ON): no span is dropped, and no sampling note is written.

The processor runs inside your process and exports nothing: it reads each span where it is, and its records are signed, chained, kept and sent exactly as a wrapped tool's are (hashes only, after the opt-in). It records the spans that are tool calls by one of three conventions:

convention a span is a tool call when used by, for example
OpenTelemetry GenAI gen_ai.operation.name is execute_tool Pydantic AI, OpenLLMetry, LangSmith's OpenTelemetry tracing
OpenInference openinference.span.kind is TOOL the OpenInference instrumentors
OpenLLMetry traceloop.span.kind is tool the OpenLLMetry (Traceloop) instrumentations

Each tool call gives a decision (the tool's name and the arguments the span holds) and an outcome (the result the span holds, or {"error": {"type", "message"}} when the span's status is an error). What the instrumentation does not put in the span is not in the record.

  • Before or after. When a span says at its start that it is a tool call, the decision is written then, before the tool runs. Pydantic AI does this. When a span says so only at its end, the decision and the outcome are both written then, after the tool ran. The LangChain instrumentations of OpenInference and of OpenLLMetry do this: they set a span's attributes after it has started. LangSmith's OpenTelemetry tracing does too: it builds a span once the run has finished. Every record says which it was: in its signed content (meta.telemetry.decision_written is before or after), and in a signed note in the chain that a hash-only verifier reads too. signafaide verify and signafaide status show it per tool: 2 tools are recorded from telemetry spans: lookup_order (decision written before the tool ran), refund (decision written after the tool ran).
  • Sampling. A span the sampler drops never reaches the processor, so its tool call has no record. The processor writes one signed note per process that says what the sampler can leave out, and verify and status repeat it as a note, never a failure. OpenTelemetry's default sampler (parent-based with an always-on root) keeps every trace your program starts and follows the caller's decision for a trace that arrives from another service: telemetry sampling follows the caller: a tool call inside a trace that arrives marked as not sampled is not recorded. A sampler that can drop your own traces (ratio-based, always-off, parent-based with another root, a custom one): records come from sampled telemetry: some tool calls may not be recorded. A plain always-on sampler gets no note.
  • Strict mode needs the SDK. "Do not run the tool unless it is recorded" is a feature of wrapping the tool with the SDK (strict=True), not of the telemetry processor. The processor never raises into your application and never waits for the network: when a record cannot be written the tool still runs, and one warning is logged.
  • One record per call. A tool that is also wrapped with the SDK, or runs through the LangChain middleware, gives one decision and one outcome, not two: the wrapper's records stand, and a strict wrapper still waits for its receipt. This also holds when the span arrives after the call has ended, as with a tracing tool that builds its spans from finished runs: the span is matched to the wrapper's call by the tool call id when both have one, otherwise by the tool's name and the span's own start and end times. A tool that an MCP gateway on the same machine records for the same agent is left to the gateway, by tool name.
  • Agent name. SignafaideSpanProcessor(agent="support-bot") names the chain. Without it the name is the tracer resource's service.name, made into a valid agent name, and without that the project folder's name.
  • Tools. Each tool seen in a span is declared as one of the agent's recorded tools, as wrap_tools declares the tools it wraps. That is the list of tools seen so far, not the agent's full tool list: give that with signafaide.declare_tools([...]). declare_tools=False turns the declaration off. store_content=True sends inputs and outputs too.

Strict mode: no receipt, no action

@signafaide.record(strict=True)
def wire_funds(account: str, amount: float): ...

The decision is shipped first, and the function runs only after the service has returned its receipt. If the service can't be reached or refuses the record, or there is no API key (no_key), signafaide.NotRecorded is raised and the function does not run. Agent frameworks often turn a tool's error into a failed tool call and print nothing, so the first time a strict tool is refused in a process the SDK writes one warning line to stderr with the tool's name and the fix.

Hash-only

By default the service receives only the envelope: the name, the time, the chain links and content_hash. The hash is sha256(salt || JCS(content)) with a random 16-byte salt per record, kept next to the content in the local chain, so the service cannot confirm a guess of the content from the hash. When you store content with the service, the salt goes with it, so anyone holding the pack can check the content against the hash. Your inputs and outputs stay in .signafaide/chain/<project>/<env>/<agent>.jsonl (.signafaide/chain/_pending/nokey/<agent>.jsonl before the opt-in), which is your evidence store. To send the content too (encrypted at rest; live records need the Team plan):

signafaide.init(store_content=True)        # everything
@signafaide.record(store_content=True)     # one tool

Offline

Nothing waits on the network unless you use strict mode: writing a record never makes a request, and a wrong key or an unreachable witness is a warning, never an exception in your tool. A malformed SIGNAFAIDE_API_KEY is caught here and never sent. With an API key, records go to .signafaide/outbox/ and are shipped in batches by a background thread: every 2 seconds, every 100 records, and once more on exit (at most 3 seconds). If the service can't be reached, they stay on disk and are retried with backoff; a refusal retrying cannot fix (quota used up, a revoked key) stops sending until the configuration changes. They ship on the next run or with signafaide flush. Records are never lost on exit. The delay shows as the gap between a record's time and its batch's server_time.

Containers that restart

A container with no persistent disk continues its chain after the witness's head, and its first record is a signed start note. So that a routine restart is not read as a possible loss, end the instance with signafaide.stop(): it ships what is left and then writes a signed stop note. A start right after a stop note is a clean restart; a start with no stop note before it (a crash, a kill, an unreachable witness) is shown as a warning, because records the earlier instance had not sent are not known.

import signal, sys, signafaide

def on_term(signum, frame):
    signafaide.stop()  # {shipped, left, errors, stopped}
    sys.exit(0)

signal.signal(signal.SIGTERM, on_term)

A program that ends by itself with SIGNAFAIDE_HEAD_FILE set writes the stop note at exit, within the exit limit above. SIGNAFAIDE_INSTANCE_STOP=0 turns that off; =1 turns it on without a head file.

Errors

Service errors raise or log signafaide.SignafaideError. Its message is the service's one-sentence fix, word for word, and .code is the error code. A chain_conflict (the service's chain for an agent differs from yours) is reported with the service's head and blocks shipping for that agent. The local chain is never rewritten. Run signafaide verify and signafaide status to see why.

Verify

signafaide verify                       # the local .signafaide state
signafaide verify pack.json             # a pack from `signafaide export`
signafaide verify pack.json --keys keys.json --json

There is one line per check (schema, hashes, signatures, chains, Merkle proofs, batch and head signatures, drand, anchors, OpenTimestamps, content), then the result line: PASS or FAIL and how many checks passed, are pending and were not checked, for example PASS: 11 of 12 checks passed, 1 pending (public timestamp). Pending means co-signed, waiting for the public timestamp (an anchor is made every hour and usually confirms within a few hours); pending and not checked are never counted as passed. The exit code is 0 for PASS, 1 for FAIL and 2 when an input can't be read. Locally, a chain the witness refuses for good (or that an older SDK wrote with time going back) shows as BLOCKED with the reason and the next step, and always exits 1; --fail-on-pending-send also fails while records wait to be co-signed, for CI. Locally, before anything was co-signed, the witness's checks show NOT CHECKED ("nothing co-signed yet") and no request is made. Service keys come from --keys <file|url>, or by default from the service's /.well-known/signafaide-keys.json. --trust-embedded-keys uses the keys inside the pack and prints a warning. The drand BLS signature is checked too, through py_ecc (a dependency, as @noble/curves is for the TypeScript SDK), so both SDKs count the same checks. A pack's rounds are checked together, so it takes well under a second.

report = signafaide.verify("pack.json", keys="keys.json")
print(report)        # the same lines
report.ok            # True / False

For an auditor the agent keys must come from you, not from the pack (otherwise a service could add a key of its own): signafaide keys export -o agent-keys.json writes every agent key, each signed by itself. The auditor runs npx signafaide verify pack.json --keys <witness>/.well-known/signafaide-keys.json --agent-keys agent-keys.json --head head.json (or the Python CLI with the same arguments; head.json is your .signafaide/head.json, which catches records cut off at the end). Without --agent-keys the client-signature check says NOT INDEPENDENT and the result is FAIL; --trust-embedded-agent-keys accepts the pack's keys and says so in the result line. On your own machine, signafaide verify pack.json uses this project's agent keys automatically. Public timestamps are checked online (--timestamp-check <url>, default https://mempool.space/api); with --offline they show NOT CHECKED, never confirmed. signafaide keys rotate --agent X gives an agent a new key; the SDK signs the registration of the new key with the old one.

Replay

signafaide replay --agent claims-bot --from 2026-11-01 --to 2026-11-13 --html replay.html
signafaide replay --agent claims-bot --record 3fa2b1c9

Shows the agent's decisions and outcomes in order, with their inputs and outputs from the local chain. Each record is checked against its content_hash, its signature and the service's receipt first, so an edited line shows as FAIL. --html also writes a self-contained page. In code: r = signafaide.replay(agent="claims-bot", since="2026-11-01"), then print(r), r.to_html(), r.ok.

Experiments: A/B on past decisions

def approve(claim_id, amount):             # same arguments as the recorded tool
    return {"approved": amount < 300}

report = signafaide.compare(approve, agent="claims-bot", name="approve_payout", since="2026-11-01", limit=500)
print(report)            # n, agreed, changed, errors, then the changed decisions
report.upload()          # optional: hash-only unless content is stored with the service

The chain is verified first; then each recorded decision with a co-signed outcome is re-run with your candidate, on your machine, with your own models and keys, and compared with the recorded output (exact canonical-JSON equality, or same=lambda recorded, candidate: ...). A candidate that raises counts as an error. Candidates must be side-effect free: compare never writes records, and a recorded tool called from a candidate raises instead of running. CLI: signafaide compare --module candidate.py:approve --name approve_payout --upload.

CLI

command does
signafaide init the opt-in: creates a free sandbox if there is no key (no account, email or card), prints the claim link, what claiming gives and when an unclaimed sandbox is deleted
signafaide status key and env, agents, last receipt, outbox size, quota; BLOCKED chains (exit 1)
signafaide repair [--agent X] [--dry-run] sets aside records no witness can take (kept in .signafaide/held/, still verified), gives the agent a new key and starts a new segment
signafaide verify [pack.json] [--keys ...] [--agent-keys ...] [--head ...] [--offline] [--fail-on-pending-send] [--json] verifies; exit 0 PASS, 1 FAIL or BLOCKED, 2 unreadable input
signafaide keys export [-o agent-keys.json] / signafaide keys rotate [--agent X] [--env test|live] the agent-key file for auditors / a new key for an agent
signafaide keys create [--agent X] [--env test|live] [--print] a new key, registered with the witness, for a secret store; writes no record (--print: prints the key file and saves nothing here)
signafaide export [--agent X] [--from T] [--to T] [-o pack.json] downloads a verification pack of the whole project (every agent); --agent narrows it to one
signafaide replay [--agent X] [--from T] [--to T] [--record H] [--html out.html] [--json] the verified timeline from the local chain; exit 1 on FAIL
signafaide compare --module file.py:fn [--agent X] [--name N] [--from T] [--to T] [--limit N] [--upload [--values]] re-runs recorded decisions with a candidate and compares; --values sends the values too (stored-content decisions only)
signafaide claim prints the claim link again, what claiming gives and how many days an unclaimed sandbox has left
signafaide flush ships the outbox now (with no key it sends nothing and says so)

What is sent besides records

Every request carries one header:

X-Signafaide-Client: signafaide-python/0.4.0 (python 3.12.3; adapter=none; agent=claude-code; via=sdk)

It holds the SDK and its version, the Python runtime and its version, and the framework adapter in use (langchain, openai-agents, otel for the OpenTelemetry processor, or none). It also holds the coding agent that set the project up (claude-code, codex, cursor, gemini-cli, copilot, windsurf or unknown) and how the call was made (sdk, cli or mcp). The agent is found from that tool's environment variables when the project is set up (signafaide init) and kept in .signafaide/config.json; it is never guessed per process. signafaide verify and signafaide export also send POST /v1/events {"name": "verify"} (or "export") when there is an API key. If that fails, the command is not affected. With no API key nothing at all is sent.

The header and the events hold no content, file paths, hostnames or user names. SIGNAFAIDE_TELEMETRY=0 removes the adapter, the coding agent and the strict-mode flag from the header, stops the coding agent being saved in .signafaide/config.json, and turns the events off. The SDK and its version, the runtime and its version, and how the call was made (via) are still sent.

Configuration

variable default
SIGNAFAIDE_API_KEY read from the environment, then .env; created by signafaide init; none: local only
SIGNAFAIDE_URL https://api.signafaide.co.uk; a self-hosted witness, or http://127.0.0.1:7474 for a local dev server. Alone it sends nothing
SIGNAFAIDE_HOME .signafaide/ in the project root; a mounted volume or /tmp/signafaide in production
SIGNAFAIDE_AGENT_KEY_<NAME> an agent's key file content from a secret store (or key_provider= in signafaide.init); live keys can use SIGNAFAIDE_AGENT_KEY_LIVE_<NAME>, made with signafaide keys create --env live --print
SIGNAFAIDE_HEAD_FILE unset: a file outside .signafaide/ (a persistent volume) that also keeps the newest signed heads, for containers whose disk does not last; or on_head= in signafaide.init
SIGNAFAIDE_INSTANCE_STOP unset: a signed stop note is written at a clean exit when a head file is set; 1 always, 0 never (see Containers that restart)
SIGNAFAIDE_EXIT_FLUSH_MS 3000: the longest a finished program is kept open to send; 0 never
SIGNAFAIDE_TEST test mode is on by itself under pytest (records in a temporary folder, nothing sent), except with a live API key (sfa_live_); 1 forces it, 0 turns it off
SIGNAFAIDE_DISABLED 1: wrapped functions run and nothing is recorded
SIGNAFAIDE_DECLARE_TOOLS 0: wrap_tools does not declare the tools it wraps (declare_tools() still does)
SIGNAFAIDE_SEGMENT_BYTES 67108864: a shipped chain file larger than this rolls into a sealed segment
SIGNAFAIDE_TELEMETRY 0 turns off the adapter, agent and strict fields and the events

Running in containers, with replicas, on read-only or ephemeral disks, on serverless or in CI: see the production guide. A record's time never goes back along its chain: if the clock steps back, the record keeps the previous record's time and the clock's reading goes in meta.wall_time.

Each project and env has its own chain per agent. A new key, for example a live key replacing the sandbox key, starts a fresh chain at seq 1. The old chain stays on disk, and signafaide status lists every chain.

The project root is the nearest folder with .signafaide/, .git, pyproject.toml or package.json. signafaide init adds .signafaide/ to .gitignore (never a running program). Agent keys live in .signafaide/agents/<agent>.key (sandbox) and .signafaide/agents/live/<agent>.key (live), mode 0600, and never leave the machine. Back them up.

Python 3.9+. Dependencies: cryptography and py_ecc (drand BLS). The otel extra adds opentelemetry-sdk.

Metadata

Release files for signafaide 0.4.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for signafaide 0.4.0
File Size Uploaded Provenance Actions
signafaide-0.4.0.tar.gz 514.8 kB Without provenance Details for signafaide-0.4.0.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for signafaide 0.4.0
File Interpreter ABI Platform Actions
signafaide-0.4.0-py3-none-any.whl Python 3 none any Details for signafaide-0.4.0-py3-none-any.whl

Total release size: 677.5 kB

Release files / signafaide-0.4.0.tar.gz

Download URL signafaide-0.4.0.tar.gz
Size 514.8 kB
Tags Source
SHA-256 checksum
How to use checksums
880fc206a5c15c926f22efc1a831e629d4fa3b092986af1dce6c50c5507d5b47
BLAKE2b-256 checksum
How to use checksums
1bfd12df8d3bef24cc92030f6d3ba1cd721a520996442feae46521dd039ce8ee
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via uv/0.10.11 {"installer":{"name":"uv","version":"0.10.11","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":null}

Release files / signafaide-0.4.0-py3-none-any.whl

Download URL signafaide-0.4.0-py3-none-any.whl
Size 162.8 kB
Tags Python 3
SHA-256 checksum
How to use checksums
d1ca0a46f8809e43493e91845b1ee50efb211ef286c50215a98e09572502b238
BLAKE2b-256 checksum
How to use checksums
7a120b49f2d809c1564f0dfc34c9860d173765c827d775b7691984be87e43eb0
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
No
Uploaded via uv/0.10.11 {"installer":{"name":"uv","version":"0.10.11","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":null}

Security for signafaide 0.4.0

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page