StructLayoutToolkitCore

stlcore is a minimal, high‑cohesion core library for bit‑accurate binary slicing. It provides the fundamental primitives (bits_get, bits_set, InfoSize) required to build struct layout analyzers, binary editors, protocol inspectors, and low‑level testing tools. Designed for clarity, correctness, and composability.

What You Can Do After Installing sltcore

sltcore provides a minimal and consistent bit-level abstraction layer for building higher‑level tools such as binary editors, protocol analyzers, and structured layout systems.

After installing the package, you can:

• Extract arbitrary bit ranges from a bytearray using bits_get
• Write arbitrary bit ranges into a bytearray using bits_set
• Represent sizes and offsets uniformly with InfoSize
• Build structured binary layouts on top of a stable bit‑operation core

Quick Examples: bits_get / bits_set

from sltcore import InfoSize, Info, bits_get, bits_set

buf = bytearray(b"\x12\x34\x56\x78")

# Extract 4 bits at offset (1 byte, 0 bits)
value = bits_get(buf, InfoSize(1, 0), InfoSize(0, 4))
print(value.to_hex)  # 0x3

# Write 5 bits at offset (2 bytes, 3 bits)
bits_set(
  buf,
  InfoSize(2, 3),
  Info(0b10101, InfoSize(0, 5)),
)
print(buf.hex()) # 12345578

sltcore.InfoSize

InfoSize is a type that represents offsets and sizes in a unified way. It supports addition, subtraction, multiplication, and division by integers, and stores both byte and bit components.

Multiplication scales the size by an integer factor, while division uses floor division for positive integer divisors. This makes it easy to express repeated sizes or half-sized layouts in a consistent way.

InfoSize also provides align_to(bits), which returns the padding size needed to reach the next alignment boundary.

• It rounds up the current bit position to the next bits boundary.
• It returns the gap as a new InfoSize value.
• The boundary must be a positive power of two (for example: 32, 64, 128).

size = InfoSize(1, 2)
print(size * 3)   # 3 * (1 byte, 2 bits)
print(size / 2)   # floor division by 2

gap = InfoSize(3, 4).align_to(32)  # total=28 bits -> next 32-bit boundary
print(gap)  # 0 bytes, 4 bits

gap = InfoSize(5, 0).align_to(32)  # total=40 bits -> next 64-bit boundary
print(gap)  # 3 bytes, 0 bits

It is used for both offset and size, allowing consistent structural layout definitions.

• Field List

  Field	Type	Description
  byte	int	the byte size
  bit	int	the bit size (0–7) always normalized so that bit < 8

• Property List

  Property	Type	Description
  bits	int	Total bit length. This property converts the stored byte and bit components into a single bit count using the formula byte * 8 + bit
  bytes	int	Total byte length. This property converts the combined bit length (byte * 8 + bit) into a byte count using integer division (bits // 8)
  hex_digits	int	Number of hexadecimal digits needed to represent the field. Since one hex digit corresponds to 4 bits, the value is calculated as ceil(bits / 4)
  mask	int	Bitmask for the field size. It produces a mask that covers exactly bits bits, using the formula (1 << bits) - 1. This mask is typically used for extracting or normalizing values.

• JSON Conversion

  Method	Description
  serialize	Serializes InfoSize to a typed JSON string (includes __type__ = "InfoSize").
  deserialize	Deserializes InfoSize from a typed JSON string.
  to_json	Alias of serialize.
  from_json	Alias of deserialize.
  to_dict	Serializes InfoSize to a dict payload (byte, bit).
  from_dict	Deserializes InfoSize from a dict payload.

  Example:

  size = InfoSize(byte=1, bit=10)  # normalized to (2, 2)
  json_text = size.serialize()
  
  restored = InfoSize.deserialize(json_text)
  print(restored.byte, restored.bit)  # 2 2
  
  # contains __type__
  print(json_text)  # {"__type__": "InfoSize", "byte": 2, "bit": 2}
  

sltcore.Info

Info stores an InfoSize and a raw integer value.

It also supports an optional scale value, which defaults to 1.0 and represents the value of one least-significant bit.

The scaled conversion helpers use this field when converting between raw values and numeric values. In particular, from_float and from_int divide by scale before storing raw data, and to_float and to_int multiply the stored value by scale when reading it back.

This allows higher‑level code to treat extracted fields as structured units rather than plain integers.

• Field List

  Field	Type	Description
  raw_value	int or bytearray	The internal integer representation of the field. It is obtained by converting the corresponding bytes into an integer and applying the size mask so that the value fits within the bit width specified by InfoSize.
  info_size	InfoSize	Size descriptor for this value. It provides the byte and bit length of the field and determines how the raw_value is masked, extracted, and written back into the byte sequence.

• Classmethod List

  Classmethod	Description
  from_bool	Creates an Info instance from a boolean value.
  from_signed_int	Creates an Info instance from a signed integer value using two's-complement encoding for the requested bit width.
  from_unsigned_int	Creates an Info instance from an unsigned integer value while masking it to the requested bit width.
  from_bytes	Creates an Info instance from a bytes object, ensuring that the value fits within the specified size by applying a bitmask.
  from_bytearray	Creates an Info instance from a bytearray, ensuring that the value fits within the specified size by applying a bitmask.
  from_float	Creates an Info instance from a float value, converting it to its raw bit representation based on the specified size.

  Example: Creating an Info from a float value

  size = InfoSize(byte=0, bit=32)   # 32-bit float
  info = Info.from_float(3.14, size)
  
  print(info.raw_value)     # IEEE754 raw bits (e.g., 0x4048F5C3)
  print(info.info_size.bits)  # 32
  

• Property List

  Property	Type	Description
  to_unsigned_int	int	Returns the extracted bits as an unsigned integer.
  to_signed_int	int	Returns the extracted bits as a signed integer.
  to_hex	str	Returns the extracted bits as a hexadecimal string.
  to_bytes	bytes	Returns the extracted bits as a bytes object.
  to_bool	bool	Returns the extracted bits as a boolean value.
  to_float	float	Returns the extracted bits as a float.
  byte_swap	Info	Returns a new Info instance with the byte order reversed.

• JSON Conversion

  Method	Description
  serialize	Serializes Info to a typed JSON string (includes __type__ = "Info").
  deserialize	Deserializes Info from a typed JSON string.
  to_json	Alias of serialize.
  from_json	Alias of deserialize.
  to_dict	Serializes Info to a dict payload.
  from_dict	Deserializes Info from a dict payload.

  Notes:

  • serialize/deserialize handle JSON strings only.
  • Typed payload includes __type__ = "Info".
  • For integer raw values, payload stores raw_value.type = "int".
  • For bytearray raw values, payload stores raw_value.type = "bytearray" and hex text.
  • scale is preserved in both directions.

  Example:

  info = Info.from_unsigned_int(0x2A, InfoSize(0, 8), scale=0.5)
  json_text = info.serialize()
  
  restored = Info.deserialize(json_text)
  print(restored.raw_value)  # 42
  print(restored.scale)      # 0.5
  
  info_bytes = Info.from_bytearray(bytearray([0xAA, 0xBB]), InfoSize(2, 0))
  restored_bytes = Info.deserialize(info_bytes.serialize())
  print(restored_bytes.to_bytes.hex())  # aabb
  
  # contains __type__
  print(json_text)
  

Example: Creating an Info with a scale

size = InfoSize(byte=0, bit=10)
info = Info.from_int(5, size, scale=0.5)

print(info.raw_value)  # 10
print(info.to_float)   # 5.0

sltcore.bits_get

bits_get extracts a field from a bytearray using an offset and size, and returns an Info object.

Input:

• bytearray buffer
• InfoSize offset
• InfoSize size

Output:

• Info containing the extracted value and its size

sltcore.bits_set

bits_set writes a value into a bytearray at the specified offset.

Input:

• bytearray buffer
• InfoSize offset
• Info value (which includes its size)

The function masks and replaces the target bit range inside the buffer.

Documentation

For detailed usage, examples, and parameter descriptions, refer to the docstrings via:

python

• help(sltcore.InfoSize)
• help(sltcore.Info)
• help(sltcore.bits_get)
• help(sltcore.bits_set)