smallsteps 0.1.3

Add your description here

Smallsteps - improve your codebase in small steps

Smallsteps allows you to declare ratchets – metrics that must increase over time – and to enforce them via testing or CI pipelines.

A typical situation: you want to add test coverage as a health check. Initially your coverage is at 42% so you create a CI gate that fails if it falls under 40%. Now you have your baseline secured – so far so good. You make a resolution to yourself: you will increase your coverage and bump up the minimum percentage frequently. Somehow that never happens and your coverage stays at 42%.

With smallsteps you declare your goal of 80% coverage and that you want to reach it in 100 days. Smallsteps computes the necessary percentage that must be met for each day (e.g. after 50 days you need 60% coverage) and fails if the goal is not met.

Example

We are using this repository itself as an example. We want to enforce our test coverage to go up. So we create a ratchet:

uvx smallsteps add \
  --name="Pytest Coverage" \
  --command="uv run pytest --cov --cov-report=json > /dev/null && jq -r '.totals.percent_covered' coverage.json" \
  --goal=80 \
  --end="2026-10-01"

This created a new file – smallsteps.toml – which holds the configuration of our ratchet:

# Smallsteps Configuration

[[ratchets]]
name = "Pytest Coverage"
start = 2026-06-25
end = 2026-10-01
initial_value = 57.142857142857146
goal_value = 80
command = "uv run pytest --cov --cov-report=json > /dev/null && jq -r '.totals.percent_covered' coverage.json"

Note

• You don't need to memorize the command parameters, smallsteps add walks you through them interactively.
• Ratchets can be increasing or decreasing. Percentages (56% with explicit "%") are parsed as floats (.56). So make sure that your goal format matches the command output: if the output is plain 56, the goal should also be 56. If its 56%, the goal must be 56% or .56.

You can inspect, add or modify the ratchets using the toml file.

Checking your Ratchets

Run uvx smallsteps check to check the status of your ratchets. To simulate the future you can run with --date, e.g.:

uv smallsteps check --date 2026-10-31
Evaluating 1 ratchet(s)...

Pytest Coverage: BEHIND (Current: 57.14, Expected Min: 80.00)

Progress check failed.

shows that on the goal date the check will fail if we do not achieve 80% test coverage.

CI and reading values from env

By default, running smallsteps check executes the underlying shell commands to gather active metrics. In modern CI/CD, you may prefer to compute metrics once during separate pipeline steps rather than using Smallsteps as a heavy task orchestrator.

By default smallsteps looks for environment variables matching the ratchets before running the command. E.g. if SMALLSTEPS_PYTEST_COVERAGE is present, the coverage is not re-computed. You can use this in CI to pass outputs from test workflow into the smallsteps action. To get a scaffolding github action with the required input vars for your ratchets run uvx smallsteps ci.

Have a look at the action and the whole workflow (not provided by a command because too specific for your setup) to see how the plumbing can work.

Installation

This documentation assumes you are using uv, hence you don't need to do anything despite using the uv tool command (uvx) to install and run smallsteps.

License

MIT