smmultiio 1.2.5

Library to control Multi-IO Automation Card

Welcome to SMmultiio’s documentation!

Install

sudo pip install SMmultiio

or

sudo pip3 install SMmultiio

Update

sudo pip install SMmultiio -U

or

sudo pip3 install SMmultiio -U

Initiate class

$ python
Python 3.11.8 (main, Feb 12 2024, 14:50:05) [GCC 13.2.1 20230801] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiio
>>> mio = multiio.SMmultiio()
>>>

Documentation

class multiio.SMmultiio(stack=0, i2c=1)

Bases: object

Python class to control the Multiio Card for Raspberry Pi.

• Parameters:
  • stack (int) – Stack level/device number.
  • i2c (int) – i2c bus number

cal_i_in(channel, value)

Calibrate 4-20mA input channel. Calibration must be done in 2 points at min 10mA apart.

• Parameters:
  • channel (int) – Channel number
  • value (float) – Real(measured) amperage value

cal_i_out(channel, value)

Calibrate 4-20mA output channel. Calibration must be done in 2 points at min 10mA apart.

• Parameters:
  • channel (int) – Channel number
  • value (float) – Real(measured) amperage value

cal_rtd_res(channel, value)

Calibrate rtd resistance.

• Parameters:
  • channel (int) – RTD channel number to calibrate
  • value (float) – Real(measured) resistance in ohm

cal_u_in(channel, value)

Calibrate 0-10V input channel. Calibration must be done in 2 points at min 5V apart.

• Parameters:
  • channel (int) – Channel number
  • value (int) – Voltage value

cal_u_out(channel, value)

Calibrate 0-10V output channel. Calibration must be done in 2 points at min 5V apart.

• Parameters:
  • channel (int) – Channel number
  • value (float) – Real(measured) voltage value

calib_status()

Get current calibration status of device.

• Returns: (int) Calib status

get_all_leds()

Get all leds state as bitmask.

• Returns: (int) Leds state bitmask

get_all_opto()

Get all optocoupled input status as a bitmask.

• Returns: (int) Optocoupled bitmask

get_all_relays()

Get all relays state as bitmask.

• Returns: (int) Relays state bitmask

get_button()

Get button status.

• Returns: (bool) status : True(ON)/False(OFF)

get_button_latch()

Get button latch status.

• Returns: (bool) status : True(ON)/False(OFF)

get_i_in(channel)

Get 4-20mA input channel value in mA.

• Parameters: channel (int) – Channel number
• Returns: (float) 4-20mA input channel value in mA

get_i_out(channel)

Get 4-20mA output channel value in mA.

• Parameters: channel (int) – Channel number
• Returns: (float) 4-20mA output value in mA

get_led(led)

Get led state.

• Parameters: led (int) – Led number
• Returns: 0(OFF) or 1(ON)

get_motor()

Get motor speed value in %.

• Returns: (float) Motor speed value in %

get_opto(channel)

Get optocoupled input status.

• Parameters: channel (int) – Channel number
• Returns: (bool) Channel status

get_opto_counter(channel)

Get optocoupled inputs edges counter for one channel.

• Parameters: channel (int) – Channel number
• Returns: (int) opto counter

get_opto_edge(channel)

Get optocoupled channel counting edges status.

• Parameters: channel (int) – Channel number
• Returns: (int) Counting edge status : 0(none)/1(rising)/2(falling)/3(both)

get_opto_encoder_counter(channel)

Get optocoupled encoder counter for one channel.

• Parameters: channel (int) – Channel number
• Returns: (int) Opto encoder counter

get_opto_encoder_state(channel)

Get optocoupled quadrature encoder state.

• Parameters: channel (int) – Encoded channel number
• Returns: (int) state 0(disabled)/1(enabled)

get_relay(relay)

Get relay state.

• Parameters: relay (int) – Relay number
• Returns: (int) Relay state

get_rtc()

Get rtc time.

• Returns: (tuple) date(year, month, day, hour, minute, second)

get_rtd_res(channel)

Get RTD resistance in ohm.

• Parameters: channel (int) – RTD channel number
• Returns: (float) RTD resistance value

get_rtd_temp(channel)

Get RTD temperature in Celsius.

• Parameters: channel (int) – RTD channel number
• Returns: (float) RTD Celsius value

get_servo(channel)

Get servo position value in %.

• Parameters: channel (int) – Channel number
• Returns: (float) Servo position value in % for specified channel.

get_u_in(channel)

Get 0-10V input channel value in volts.

• Parameters: channel (int) – Channel number
• Returns: (float) Input value in volts

get_u_out(channel)

Get 0-10V output channel value in volts.

• Parameters: channel (int) – Channel number
• Returns: (float) 0-10V output value

get_version()

Get firmware version.

Returns: (int) Firmware version number

reset_opto_counter(channel)

Reset optocoupled inputs edges counter.

• Parameters: channel (int) – Channel number

reset_opto_encoder_counter(channel)

Reset optocoupled encoder counter for one channel.

• Parameters: channel (int) – Channel number

set_all_leds(val)

Set all leds states as bitmask.

• Parameters: val (int) – Led bitmask

set_all_relays(val)

Set all relays states as bitmask.

• Parameters: val (int) – Relay bitmask

set_i_out(channel, value)

Set 4-20mA output channel value in mA.

• Parameters:
  • channel (int) – Channel number
  • value (float) – Amperage value in mA

set_led(led, val)

Set led state.

• Parameters:
  • led (int) – Led number
  • val – 0(OFF) or 1(ON)

set_motor(value)

Set motor speed value in %.

• Parameters: value (float) – Speed value in %

set_opto_edge(channel, value)

Set optocoupled channel counting edges status.

• Parameters:
  • channel (int) – Channel number
  • value (int) – Counting edge status 0(none)/1(rising)/2(falling)/3(both)

set_opto_encoder_state(channel, state)

Set optocoupled quadrature encoder state.

• Parameters:
  • channel (int) – Encoded channel number
  • state (int) – 0(disabled)/1(enabled)

set_relay(relay, val)

Set relay state.

• Parameters:
  • relay (int) – Relay number
  • val – 0(OFF) or 1(ON)

set_rtc(year, month, day, hour, minute, second)

Set rtc time.

• Parameters:
  • year (int) – current year
  • month (int) – current month
  • day (int) – current day
  • hour (int) – current hour
  • minute (int) – current minute
  • second (int) – current second

set_servo(channel, value)

Set servo position value in %.

• Parameters:
  • channel (int) – Channel number
  • value (float) – Servo position value in %

set_u_out(channel, value)

Set 0-10V output channel value in volts.

• Parameters:
  • channel (int) – Channel number
  • value (float) – Voltage value

wdt_clear_reset_count()

Clear watchdog counter.

wdt_get_init_period()

Get watchdog initial period.

• Returns: (int) Initial watchdog period in seconds

wdt_get_off_period()

Get watchdog off period in seconds.

• Returns: (int) Watchfog off period in seconds.

wdt_get_period()

Get watchdog period in seconds.

• Returns: (int) Watchdog period in seconds

wdt_get_reset_count()

Get watchdog reset count.

• Returns: (int) Watchdog reset count

wdt_reload()

Reload watchdog.

wdt_set_init_period(period)

Set watchdog initial period.

• Parameters: period (int) – Initial period in second

wdt_set_off_period(period)

Set off period in seconds

• Parameters: period (int) – Off period in seconds

wdt_set_period(period)

Set watchdog period.

• Parameters: period (int) – Channel number