Snipux

Snip, annotate and record your screen — a Snipping Tool workalike for Linux and Windows.

Snip an area, a window, a freehand shape, or the whole screen. Draw on it, blur out the parts that shouldn't be shared, and copy or save it. Or record the same region to a video file and trim it down. The workflow Windows gives you for free, on Linux too — and a slightly better one back on Windows.

MIT licensed, and installed with pip install snipux — see Install. There is no Windows installer: that is deliberate, and explained where it'd be missed.

Platform support

Linux is tested against Ubuntu with GNOME. Other desktops are expected to work for snipping but are not what the tool is tested against — and recording on Linux is GNOME-only (see Recording).

Why

Linux has capable screenshot tools, but the Ubuntu/GNOME/Wayland combination is where most of them get awkward — Wayland deliberately forbids applications from reading the screen whenever they like, so every capture has to go through a permission broker, and the tools that predate that constraint fight it. Snipux treats it as the primary target rather than an afterthought.

How it works

Capture the entire virtual desktop in a single shot, then run selection against that frozen frame in our own overlay. The compositor is involved for exactly one instant, which is what lets the same code path behave identically on X11 and Wayland — and what made the Windows port a backend swap rather than a rewrite. Everything downstream — region select, annotation, export — is ordinary drawing on an image already held in memory.

Recording rides the same rule: the frozen frame is still how you choose, and recording starts once you have chosen. The compositor is never involved while you are dragging.

Install

Linux

First, the things Ubuntu may not already have — pipx, git (which pipx shells out to for the install below), and one library Qt needs that nothing else on a stock desktop pulls in:

sudo apt install pipx git libxcb-cursor0
pipx ensurepath      # only needed once, and only if pipx was just installed

libxcb-cursor0 is not optional: without it Snipux installs cleanly and then crashes on launch, behind four lines of Qt plugin text that name the library but not the package. Then:

pipx install git+https://github.com/CydoEntis/snipux.git
snipux --setup
snipux &

pipx gives Snipux and its dependencies their own isolated environment and puts a snipux launcher on PATH. --setup writes the pieces pipx can't — the .desktop entry, the autostart entry, and the GNOME shortcut — and is safe to re-run.

The third line is not optional the first time. The shortcut runs snipux --snip, which needs a resident Snipux to talk to, and --setup only writes the autostart entry — it doesn't start anything. Without it the key you just bound does nothing until your next login. (packaging/install.sh does this step for you, which is why it isn't mentioned there.)

That's it — press Ctrl+Alt+S.

Prefer SSH, or contributing rather than just using it?

pipx install git+ssh://git@github.com/CydoEntis/snipux.git

From a clone instead. packaging/install.sh does the same job without pipx — it builds a virtual environment under ~/.local/share/snipux/venv, installs into it, drops a launcher in ~/.local/bin, runs --setup, and starts the app. It checks for the python3-venv and libxcb-cursor0 prerequisites first and names the package to install if either is missing:

git clone https://github.com/CydoEntis/snipux.git
cd snipux
./packaging/install.sh

Windows

The one prerequisite is Python 3.10+ — tick "Add python.exe to PATH" in the installer. Nothing else: no Git, no pipx, no file to download by hand.

Then, in PowerShell:

py -m pip install snipux
py -m snipux

The first line takes a few minutes because it pulls down Qt. The second starts Snipux.

The first launch sets itself up: a Start Menu shortcut, a Startup entry so it is running after every login, and the Ctrl+Alt+S shortcut. After that, Ctrl+Alt+S is all anyone needs — no terminal again.

snipux --setup does the same thing explicitly, but is not a step to hand anyone: it is for redoing the integration after a move. AppController.run_first_launch_setup already runs it the first time the app is ever the resident instance.

Snipux has to actually be running for the hotkey to do anything. Unlike GNOME's shortcut on Linux, which the desktop itself owns, Windows' hotkey is a registration the Snipux process holds only while it's alive. That's what autostart is for: the Startup entry means Snipux is already running by the time you'd want to press the shortcut, from the next login onward. The first time, start it yourself with the second command above.

Nothing here trips Smart App Control or SmartScreen, which is the point. Both react to unrecognised executables; this is Python source installed by the python.exe the user already trusts. An earlier version shipped an Inno Setup installer and Smart App Control blocked it outright — the message read like the file was corrupt rather than like a policy decision, and unlike SmartScreen there was no "More info → Run anyway" to click through. Full reasoning in docs/releasing.md.

Updating

snipux --update

If that answers 'snipux' is not recognized, use:

py -m snipux --update

Then quit Snipux from the tray and press Ctrl+Alt+S to start the new one.

Why two. Neither form works everywhere, because it depends on how Snipux was installed, and the same machine cannot tell you which:

pipx puts Snipux in an environment of its own and a launcher on PATH, so the bare command works and py -m cannot see it at all — py runs the system Python, which has no Snipux in it. A plain pip install is the other way round. Try the bare command first, since it is shorter and covers the older instructions people may already have followed.

Installed with pipx? There is nothing to undo. pipx upgrade is the cleanest route for those installs, and it needs no reinstalling and no uninstalling first:

pipx upgrade snipux

The original pipx install git+https://github.com/CydoEntis/snipux.git recorded that URL, and it tracks the default branch — so upgrading refetches main and lands the same code the instructions above install. There is no reason to switch a working pipx install over to pip, and doing so without uninstalling first leaves two copies fighting over one Ctrl+Alt+S registration and two Startup entries.

Either way --update runs exactly this on their behalf — it is not a second update mechanism, just the same one without a command to keep somewhere findable:

py -m pip install --upgrade snipux

Nothing else to run: the shortcut and hotkey point at a location that does not change between versions.

Check it worked: tray → Settings, bottom-left, e.g. Snipux 0.2.0 / Qt 6.11.0 · Windows.

--upgrade compares versions, so every release needs a new version number in pyproject.toml. Left the same, pip decides the requirement is already satisfied and changes nothing — no error — so a fixed build published under an old number is a silent no-op and the bug gets reported a second time. .github/workflows/release.yml refuses to publish a tag whose number disagrees with pyproject.toml, which is the half of this a person can get wrong. (--force-reinstall overrides the comparison, but it also re-downloads Qt, so it is not what to tell people.)

There is no update check. Snipux never phones home, so nobody is told a new version exists — they update when they choose to. One is buildable now that this repository is public: api.github.com/repos/CydoEntis/snipux/releases/latest answers an unauthenticated request, and comparing that tag against importlib.metadata.version("snipux") is the whole of the logic. What it needs first is tagged releases to compare against.

Installing a specific version, or offline

Any published version installs by name:

py -m pip install snipux==0.5.0

An unreleased commit still installs from this repository directly:

py -m pip install https://github.com/CydoEntis/snipux/archive/refs/heads/main.tar.gz

For a machine with no network, or to pin exactly what someone runs, build a wheel and hand them the file instead:

python -m build --wheel

That writes dist/snipux-<version>-py3-none-any.whl, which installs the same way — py -m pip install snipux-0.2.0-py3-none-any.whl.

The shortcut

The default is Ctrl+Alt+S on both platforms.

Not Win+Shift+S, the combination the Windows Snipping Tool uses: Windows won't hand that to a second application — RegisterHotKey refuses it — so Snipux would have needed a different key on Windows regardless. One combination on both platforms beats two. See docs/gnome-shortcut.md.

Using a different shortcut

snipux --setup --shortcut 'Super+Shift+X'

Either spelling is accepted — the readable Super+Shift+X or gsettings' <Super><Shift>x — since both normalise to the same thing. 'Print' and 'F9' work too. Anything that isn't a shortcut is rejected with an explanation rather than bound and silently ignored.

The choice is remembered in ~/.config/snipux/config.json, so later --setup runs — including the one packaging/install.sh performs on every install — keep it instead of reverting to the default. snipux --remove deletes it along with everything else --setup wrote.

Or set it from tray → Settings…, which records the combination you press rather than making you spell out any syntax, and warns you if GNOME already uses it. That warning only sees GNOME's own shortcuts — an application that grabs a key directly owns it just as effectively and can't be detected, so "No GNOME shortcut uses this" is not a promise the key is free.

No tray icon? snipux --settings opens the same window.

Using Snipux

Snipux runs resident in the background (with a tray icon, where one is available) so the shortcut reaches an already-warm process instead of paying startup cost on every snip.

1. Press Ctrl+Alt+S. The whole virtual desktop freezes into a full-screen overlay. This single frozen frame is what selection and annotation both work against, which is why the flow is identical on Wayland and X11.
2. Choose what to capture, and what happens to it. A row docked at the top of the screen carries both: a capture mode, and a destination.
3. Drag. Or, in Window mode, hover — the window under the cursor is outlined and named — and click to accept it.
4. Annotate in place, directly on the frozen desktop; there's no separate editor window. You can keep reframing as you go: drag any edge or corner of the selection and the ink you've already drawn stays exactly where it was drawn, over the same pixels, instead of moving with the selection or getting clipped away.
5. Copy or save from the bar that appears under the selection.

Capture modes

Freeform is stills-only; video is rectangular.

What happens after a snip

Set per-capture from the chooser row, or as a default in Settings:

The review window

Copy and Save both dismiss the overlay immediately, so a snip saved to the wrong place — or copied when you meant to save — means taking the capture again. The review window is the answer: the image, where it went, and Copy / Save As… / Show in Folder.

Press Annotate and it reveals the overlay's own floating bar over the image — the same widget, the same tools, the same mark model, so there is no second tool set to drift. The only differences are that there's no capture-mode chip (nothing left to capture) and the bar's trailing action is Done, since the footer already owns Copy and Save As.

Marks made here live in image coordinates rather than screen coordinates, so they survive zooming and export exactly where they looked. Several snips in a row leave several windows open.

Recording

Switch the chooser row from snipping to recording and the same selection you'd have screenshotted becomes the thing that gets filmed. Region, Window and Full screen all record; Freeform does not.

Committing a selection arms a recording rather than starting one, so you can still reframe it with the handles. One pill carries the whole thing and its label always names what a click does — "Start recording", "Cancel · 3", "Stop · 0:12" — sitting top-centre of the monitor being recorded, moving out of the way only when the recording covers that strip. An optional 3s / 5s / 10s delay shows as a countdown numeral inside the region.

Window mode films where the window is right now. It does not follow a window that moves mid-recording; there's no window-following in the API to build it on.

What you get, per platform:

Recording on Linux is GNOME-only. The route is org.gnome.Shell.Screencast over D-Bus. QScreenCapture does not work under Wayland at all, so there is no fallback for other desktops. Snipping works everywhere; recording does not. snipux --list-backends tells you which of the two this machine can do.

Where a recording goes

Set the same way as a snip's destination:

The player

The Open destination's other half: playback, a rail with a decoded filmstrip and a real waveform, in/out handles with a plain-language readout, and export.

Export formats:

Trimming re-encodes; the untrimmed original stays at its own path until you overwrite it.

About ffmpeg

Snipux does not depend on ffmpeg, does not bundle it, and never installs it. But if one is already on your PATH, the player uses it — because Qt's bundled FFmpeg is an LGPL build with no software x264, so it cannot encode H.264 in software at all.

With a system ffmpeg, all four export formats work. Without one, MP4 degrades to MPEG-4 Part 2 and the row says so, while GIF and trimmed WebM grey out with their reason. Every export still works, one codec down. Nothing is hidden from you either way.

Tools and shortcuts

Colour and stroke width are chosen from the tray that appears once a drawing tool is selected — the eraser has none. Tool shortcuts and Enter are suppressed while a text label or a slider has keyboard focus; Esc and undo/redo always work regardless.

Where files go

Both directories are created if they don't exist yet, and a toast confirms the path each time. The folder and filename pattern are both configurable in Settings.

Command reference

Uninstall

Run snipux --remove first, so the desktop entry, the autostart entry, the installed icons and the bound shortcut all go with it. Then remove the package the way it was installed.

Installed with pipx:

snipux --remove
pipx uninstall snipux

Installed with pip:

py -m snipux --remove
py -m pip uninstall snipux

If you are unsure which you have, pipx list and py -m pip show snipux answer it — and if both do, you have two copies, which is worth fixing: they fight over one Ctrl+Alt+S registration, and whichever loses simply never answers the shortcut. Remove one of them.

Uninstalling only removes the installed package — it has no idea --setup also wrote files outside it, so skipping --remove first leaves an autostart entry pointing at a binary that no longer exists, a dead keyboard shortcut, and a ghost entry in your application list. --remove only ever splices its own custom-keybinding slot out of GNOME's list, so any other shortcuts you've set up by hand are left alone. Safe to re-run, same as --setup.

On Windows, snipux --remove also removes the copy of itself it relocated into %LocalAppData%\snipux on first run.

Troubleshooting

No tray icon. Stock Ubuntu/GNOME ships no legacy tray icon support at all unless the AppIndicator and KStatusNotifierItem Support GNOME Shell extension is installed and enabled. Without it, Snipux still runs and still answers the shortcut — it just prints a notice to stdout on startup and has no tray icon or Quit menu item. Use snipux --settings to reach Settings, and kill the process to quit. Install the extension if you want the icon and menu back.

Capture fails, or a permission prompt appears every time. On Wayland, capture goes through xdg-desktop-portal, which owns the permission prompt itself. If a capture reports the request was cancelled, press the shortcut again and approve the prompt when it appears. If it instead reports the request failed outright, check that xdg-desktop-portal and a desktop-appropriate portal backend (e.g. xdg-desktop-portal-gnome) are installed and running — Snipux can't get pixels if the portal that owns them refuses, or isn't there at all.

Recording is unavailable. snipux --list-backends answers this directly: capture and recording are separate registries with separate answers. On Linux, recording needs GNOME Shell — see Recording.

No module named snipux when updating. py runs the system Python, and Snipux is not installed in it — which is normal if it was installed with pipx, whose whole job is to keep it in an environment of its own. Use the bare command instead:

snipux --update

If neither that nor py -m snipux --update works, nothing is installed where either can see it. pipx list says whether pipx has it; py -m pip show snipux says whether the system Python does. Install per Windows above and both will work.

'snipux' is not recognized. The opposite case: it is installed in the system Python, but that Python's Scripts folder is not on PATH. Use py -m snipux --update, which does not need PATH at all. (Re-running the Python installer and ticking "Add python.exe to PATH" fixes it properly.)

Nothing happens when I press the shortcut. Check snipux --snip works when run by hand from a terminal. On Windows, check Snipux is actually running: the hotkey is a registration the process holds, and Windows releases it the moment the process exits.

What hasn't been tested yet

Development has happened on Windows and in an Ubuntu VM. These are believed to work from the design but haven't been verified on real hardware:

• Fractional display scaling on a real machine at 1.25× — the test suite is kept green at 1.0× and 1.5×
• X11 sessions end to end — the D-Bus recording route works, but the overlay and capture path under a real X11 session remain less exercised than Wayland
• Pasting into a file manager or chat app — the clipboard mime data is verified correct on the wire, but nobody has watched a paste land
• macOS, entirely

If one of these is where something goes wrong, that's a known gap, not a mystery.

Requirements

• Python 3.10+ (not needed for the Windows .exe)
• PyQt6 6.8+ and jeepney — installed automatically
• libxcb-cursor0 on Linux (sudo apt install libxcb-cursor0). Qt 6.5+ needs it to load its xcb platform plugin, and nothing else on a stock Ubuntu desktop pulls it in. Without it Snipux installs cleanly and then crashes on launch; packaging/install.sh checks for it before doing anything.
• python3-venv on Debian/Ubuntu if you use packaging/install.sh
• Ubuntu 22.04+ (Wayland or X11), or Windows 10 2004+ / 11
• ffmpeg — genuinely optional, never installed. See About ffmpeg.

Development

python -m venv .venv
source .venv/bin/activate
pip install -r requirements.txt

QT_QPA_PLATFORM=offscreen python -m pytest -q     # the verify step
python -m snipux                                  # run it

Tests must pass headless — a build machine has no display. QWidget.grab() runs a full paintEvent into an offscreen pixmap without showing anything, and that's the preferred way to test painting code.

CLAUDE.md is the working guide to the codebase: the one architectural rule, the module layout, and the conventions. docs/design/ holds the locked design handoffs, each with a divergences.md recording what was built differently and why — read those before "fixing" anything back to a handoff.

Contributing

Issues and pull requests are welcome. Please read CONTRIBUTING.md first — it's short, and it covers the two things that matter most here: the architectural rule that isn't negotiable, and why a green test suite is weaker evidence in this codebase than you'd expect.

Licence

MIT — see LICENSE.