spacerouter 1.5.0rc7

Python SDK for the Space Router residential proxy network

SpaceRouter Python SDK

Python SDK for routing HTTP requests through the Space Router residential proxy network.

v1.5 testnet — payment is now done by depositing SPACE into the on-chain TokenPaymentEscrow and signing per-request EIP-712 receipts. The legacy sr_live_* API key flow is still supported on production until v1.5 ships there; on testnet it has been retired. See the migration appendix at the bottom of this document.

Installation

pip install spacerouter
pip install spacerouter-cli      # bundles the `spacerouter` command

The SDK depends on eth-account and web3 for EIP-712 signing and RPC calls; both are pulled in automatically.

Quickstart (testnet, escrow flow)

This six-step path takes you from a fresh wallet to a paid proxied request and back to a fully settled Leg 1 receipt. Every step is a runnable shell snippet using only the bundled spacerouter CLI and the SDK.

1. Set environment

# Testnet defaults — see internal-docs/v1.5-consumer-protocol.md §1.
export SR_GATEWAY_URL="https://your-gateway.example.com"
export SR_GATEWAY_MANAGEMENT_URL="https://your-gateway.example.com"
export SR_ESCROW_CHAIN_RPC="https://rpc.cc3-testnet.creditcoin.network"
export SR_ESCROW_CONTRACT_ADDRESS="0xC5740e4e9175301a24FB6d22bA184b8ec0762852"
export SR_ESCROW_CHAIN_ID="102031"

# Wallet — generate or import. Never commit this.
export SR_ESCROW_PRIVATE_KEY="0x..."

2. Fund a testnet wallet

You need both:

• native CTC on Creditcoin testnet (for gas) — use the team faucet.
• mock SPACE tokens (the ERC-20 the escrow charges in) — minted from 0x7395953AfBD4F33F05dBadCf32e045B3dd1a62FA. Ask in Slack to be topped up if your balance reads zero.

# Confirm balances.
spacerouter escrow token-balance "$(python -c 'import os; from eth_account import Account; \
    print(Account.from_key(os.environ["SR_ESCROW_PRIVATE_KEY"]).address)')"

3. Approve the escrow as ERC-20 spender

A one-shot allowance covers many deposits.

# Allow the escrow to pull up to 100 SPACE on your behalf.
spacerouter escrow approve 100000000000000000000

escrow deposit will auto-approve when allowance is short, but splitting the two transactions is cleaner for hardware-wallet workflows or when you want a single large approve(2**256-1).

4. Deposit SPACE into escrow

# 10 SPACE in wei.
spacerouter escrow deposit 10000000000000000000

# Verify.
spacerouter escrow balance "$(python -c 'import os; from eth_account import Account; \
    print(Account.from_key(os.environ["SR_ESCROW_PRIVATE_KEY"]).address)')"

5. Make a paid proxy request

spacerouter request get https://httpbin.org/ip --pay

--pay swaps the legacy API-key flow for the escrow-signed flow: the CLI pulls a fresh challenge from {gateway}/auth/challenge, attaches the four X-SpaceRouter-Payment-* / X-SpaceRouter-Challenge-* headers, and proxies the request. Add --region US etc. as before.

6. Sync Leg 1 receipts

After each paid request the gateway parks an unsigned Leg 1 receipt addressed to your wallet. You sign it with EIP-712 and submit it back via the broker.

# One-shot: list, sign, submit.
spacerouter receipts sync

# Or in one step alongside the request:
spacerouter request get https://httpbin.org/ip --pay --auto-settle

# Long-running settler that drains the queue every 30 s.
spacerouter receipts sync --watch 30

# Just look at what's pending without signing.
spacerouter receipts pending --json

Programmatic SDK

import asyncio
from spacerouter import SpaceRouter
from spacerouter.payment import SpaceRouterSPACE

PROXY = "https://your-gateway.example.com"
GATEWAY_MGMT = PROXY  # same host, separate routes
ESCROW = "0xC5740e4e9175301a24FB6d22bA184b8ec0762852"

async def main(private_key: str):
    consumer = SpaceRouterSPACE(
        gateway_url=GATEWAY_MGMT,
        proxy_url=PROXY,
        private_key=private_key,
        chain_id=102031,
        escrow_contract=ESCROW,
    )
    challenge = await consumer.request_challenge()
    headers = consumer.build_auth_headers(challenge)

    with SpaceRouter(consumer.address.lower(), gateway_url=PROXY) as cli:
        resp = cli.get("https://httpbin.org/ip", headers=headers)
        print(resp.json())

    # Settle the Leg 1 receipt the gateway just parked.
    print(await consumer.sync_receipts())

asyncio.run(main("0x..."))

The SpaceRouterSPACE client validates received receipts against your local byte count, signs only after validation (sign_receipt_after_validation), and exposes sync_receipts() as a convenience wrapper around the Leg 1 broker.

CLI cheat sheet

Command	What it does
spacerouter escrow balance <addr>	Read on-chain escrow balance.
spacerouter escrow token-balance <addr>	Read undeposited SPACE balance.
spacerouter escrow approve <wei> [--token ADDR]	One-shot ERC-20 allowance for the escrow.
spacerouter escrow deposit <wei>	Deposit SPACE; auto-approves if needed.
spacerouter escrow initiate-withdrawal <wei>	Start the 5-day withdrawal timer.
spacerouter escrow execute-withdrawal	Pull funds out after the delay.
spacerouter receipts pending [--json] [--limit N]	List unsigned Leg 1 receipts.
spacerouter receipts sync [--json] [--watch SECS]	Sign all and submit.
spacerouter receipts list [--client ADDR] [--json]	Group pending receipts by tunnel.
spacerouter receipts is-settled <client> <uuid>	Check on-chain claim state.
spacerouter request get <url> --pay	Paid proxied GET.
spacerouter request get <url> --pay --auto-settle	Pay + settle Leg 1 in one step.

For deeper troubleshooting (chain ID mismatch, allowance bugs, EIP-712 signer mismatch, NTP clock skew, etc.) see docs/consumer-quickstart.md.

Region Targeting

client = SpaceRouter(payer_address, region="US")
jp_client = client.with_routing(region="JP")

SOCKS5 Proxy

client = SpaceRouter(
    payer_address,
    protocol="socks5",
    gateway_url="socks5://gateway:1080",
)

Requires the socks extra: pip install spacerouter[socks].

Error Handling

from spacerouter.exceptions import (
    AuthenticationError,   # 407 - bad payment auth
    RateLimitError,        # 429
    NoNodesAvailableError, # 503
    UpstreamError,         # 502
)

try:
    response = client.get("https://example.com")
except RateLimitError as e:
    print(f"Rate limited, retry after {e.retry_after}s")

HTTP errors from the target website (404, 500, etc.) are not raised as exceptions — only proxy-layer errors are.

Configuration

Parameter	Default	Description
gateway_url	https://gateway.spacerouter.org	Proxy gateway URL (CONNECT)
protocol	http	http or socks5
region	None	2-letter country code (ISO 3166-1 alpha-2)
timeout	30.0	Request timeout in seconds

Escrow-mode payment is configured via env vars: SR_ESCROW_PRIVATE_KEY, SR_ESCROW_CONTRACT_ADDRESS, SR_ESCROW_CHAIN_RPC, SR_ESCROW_CHAIN_ID, SR_GATEWAY_MANAGEMENT_URL.

Migration from v1.4 (api-key)

The legacy API-key flow (sr_live_* keys passed via --api-key / SR_API_KEY / the SpaceRouter("sr_live_…") positional argument) is dead on testnet as of v1.5. On production it still works until v1.5 ships there. Plan your migration:

1. Generate a wallet keypair (any Ethereum-style 32-byte secp256k1 key) and fund it with native CTC + mock SPACE on testnet.
2. Replace SpaceRouter("sr_live_…") with the escrow-signed flow shown above. The CLI flag is --pay; the SpaceRouter SDK is happy to accept the wallet address (lowercase 0x-hex) in place of an API key provided the request carries the four X-SpaceRouter-* headers that SpaceRouterSPACE.build_auth_headers() produces.
3. Once v1.5 ships to production, the API-key flow on prod will be retired the same way. Until then you can keep two code paths or use the wallet flow on testnet only.

The v1.5 protocol contract (EIP-712 domain, broker auth message, wire formats) is locked at internal-docs/v1.5-consumer-protocol.md. SDKs MUST produce byte-identical signatures for the canonical test vector in §7.