SSH Channels Hub

English | 中文

Declarative SSH tunnels with auto-reconnect. Define your port forwards once in TOML, start one service, and they all come up — reconnecting automatically when the link drops.

Cross-platform (Linux, macOS, Windows). Written in Rust on top of russh.

Why

Reach for this when ssh -L 3306:127.0.0.1:3306 db.example.com has grown into "I have five of those, my laptop sleeps, my Wi-Fi flakes, and I want them all back when I open the lid."

• Declarative: tunnels live in config.toml, not in shell history or terminal panes.
• No host config duplication: host info (HostName / User / Port / IdentityFile) is read straight from ~/.ssh/config — you reference aliases.
• ProxyJump aware: chain through bastions defined in ~/.ssh/config — using alias-only references, public-key authentication, and strict known_hosts checks for targets and jumps. See docs/configuration.md §3.4.
• Auto-reconnect: compatible tunnels share one SSH session; a dropped route reconnects with jittered backoff without disturbing other routes.
• Both directions in one schema: local-to-remote (ssh -L) and remote-to-local (ssh -R).
• Foreground or daemon: start attaches to the terminal, start -D detaches; stop / restart / status talk to the running process via IPC.

Quickstart

1. Run or install

Run directly with uvx (recommended, no installation required):

uvx ssh-channels-hub --help

Or install it with pip inside an activated virtual environment:

pip install ssh-channels-hub
ssh-channels-hub --help

The wheel installs the same ssh-channels-hub binary on Linux x86_64, macOS ARM64, and Windows x86_64; it does not run through Python.

If you already have a Rust/Cargo toolchain, you can also install with:

cargo binstall ssh-channels-hub          # requires cargo-binstall; installs a prebuilt binary
cargo install ssh-channels-hub --locked # build and install from source

For development, clone and build the source:

git clone https://github.com/maoXyzt/ssh-channels-hub.git
cd ssh-channels-hub
cargo build --release           # binary at target/release/ssh-channels-hub (or .exe on Windows)

2. Have the host in ~/.ssh/config

Host my-db
  HostName db.example.com
  User myuser
  IdentityFile ~/.ssh/id_rsa

3. Write config.toml in the current directory:

[[channels]]
name      = "db"
hostname  = "my-db"             # alias from ~/.ssh/config
direction = "local->remote"     # ssh -L
local     = "3306"              # listen on 127.0.0.1:3306
remote    = "3306"              # server connects to 127.0.0.1:3306

4. Run

uvx ssh-channels-hub start      # no installation
# or, after pip or Cargo installation:
ssh-channels-hub start          # Ctrl+C to stop
# or, after cargo build:
./target/release/ssh-channels-hub start       # Linux/macOS
.\target\release\ssh-channels-hub.exe start  # Windows PowerShell

Now mysql -h 127.0.0.1 -P 3306 goes through the tunnel.

Tip: ssh-channels-hub generate -o config.toml scaffolds one commented-out [[channels]] block per alias in your SSH config — uncomment and fill in ports. Or cp config.example.toml config.toml for an annotated template.

Configuration

config.toml is looked up in this order (first existing wins):

--config /path/to/file overrides the lookup.

Channel schema

[[channels]]
name      = "string"                            # required, unique identifier
hostname  = "ssh-config-alias"                  # required; resolves via ~/.ssh/config
direction = "local->remote" | "remote->local"   # required
local     = "port" | "host:port"                # required, this machine's side
remote    = "port" | "host:port"                # required, the SSH server's side

local and remote always name the address on their respective side regardless of direction. Direction decides who listens:

• local->remote (≈ ssh -L): this machine listens on local; the server dials remote for each connection.
• remote->local (≈ ssh -R): the server binds remote; incoming traffic is bridged to local on this side.

Endpoints accept:

• "3306" → 127.0.0.1:3306 (bare port, host defaults to loopback)
• "127.0.0.1:3306" → explicit form
• "0.0.0.0:8080" → bind on every interface
• "[::1]:3306" → IPv6

Web status page

The Web status page is enabled by default, and its loopback URL is printed at startup. It shows channel endpoints, health, retries, latest errors, and host-key remediation commands.

Open local opens the channel's local endpoint. Set [web].enabled = false to disable the page; see the configuration reference for other options.

Credentials

~/.ssh/config can't hold passwords or key passphrases. If SSH config alone can't authenticate to a host, add an [auth.<alias>] block keyed by its alias:

[auth.my-db]
password   = "..."          # for password-auth hosts (no IdentityFile in SSH config)
# or
passphrase = "..."          # for encrypted IdentityFile

password overrides any IdentityFile. Hosts that authenticate cleanly via SSH config alone don't need an [auth.*] block at all.

Reconnection (global)

[reconnection]
# max_retries             = 0     # default: 0 = unlimited
# initial_delay_secs      = 1     # default: 1 second
# max_delay_secs          = 30    # default: 30 seconds
# use_exponential_backoff = true  # default: true

Omit this section to use all defaults.

Each retry delay includes jitter. After a finite retry cycle is exhausted, automatic recovery continues with a second exponential backoff capped at 60 seconds; a successful session resets both counters. SSH handshakes are serialized to avoid reconnect storms.

More examples

Share the tunnel on the local network

Scenario: Let other LAN machines use a database tunnel on this machine.

Configuration:

[[channels]]
name      = "shared-db"
hostname  = "db-server"
direction = "local->remote"
local     = "0.0.0.0:3306"
remote    = "3306"

Explanation: The service listens on 0.0.0.0:3306 and forwards connections to 127.0.0.1:3306 on db-server. Restrict access with a firewall.

Expose a local-network service to the SSH server

Scenario: Expose a service on the local network to edge-server with remote->local (ssh -R).

Configuration:

[[channels]]
name      = "lan-api"
hostname  = "edge-server"
direction = "remote->local"
local     = "192.168.1.50:3000" # bare "3000" means 127.0.0.1:3000
remote    = "8080"              # edge-server binds 127.0.0.1:8080

Explanation: Connections to 127.0.0.1:8080 on edge-server are forwarded to 192.168.1.50:3000. To accept external connections on the server, set remote = "0.0.0.0:8080" and configure GatewayPorts clientspecified in sshd_config.

Full field reference: docs/configuration.md.

Commands

All commands accept --config /path/to/config.toml to point at a non-default file, and --debug for verbose logging.

Further reading

• Troubleshooting — common connection, host-key, and port issues.
• Configuration reference — every field, every edge case.
• How to use — task-oriented walkthroughs.
• Connection testing — verify configured channels.
• Architecture — how channels, sessions, and reconnection fit together.

License

MIT — see LICENSE.