This is a pre-production deployment of Warehouse, however changes made here WILL affect the production instance of PyPI.
Latest Version Dependencies status unknown Test status unknown Test coverage unknown
Project Description

Installation Requirements

Uses docopt:

yum install python-docopt  (or python3-docopt)

or:

pip install docopt (or pip3 install docopt)

Also requires my scripts package:

git clone https://github.com/KenKundert/scripts.git
cd scripts
./install

Introduction

SSH Config generates an ssh config file adapted to the network you are currently using. In this way, you always use the fastest paths available for your ssh related activities (sshfs, email, vnc, mercurial, etc.). You can also easily reconfigure ssh to make use of proxies as needed or select certain servers or ports based on your location or restrictions on the network.

The following situations are supported:

  1. You may give the mac address or addresses for your router or routers and your network will automatically be recognized.
  2. You can configure which hostname or IP address is used for a particular host depending on which network you are on. In this way you always use the fastest connection available for each host.
  3. You can specify that certain hosts are hidden behind other hosts, so that a SSH proxy should be used to access them.
  4. You can specify port forwarding information for each host. Then, two SSH configurations will be created for those hosts, one that includes port forwarding and one that does not. That way, once the port forwards are established, you can open additional shells on that host without SSH trying to create conflicting port forwards.
  5. You can enter multiple hostnames or IP addresses and give their locations. Then, if you specify your location, the closest server will be used automatically.
  6. You can specify proxy configurations and specify that one should be used for all hosts not on your current network.
  7. You can specify port restrictions and have SSH work around them if possible (if your server supports alternative ports).
  8. You can configure a default location, proxy, or set of port restrictions for each of your known networks.
  9. Once host names are defined, they do not change even though you are using different configurations (different networks, locations, proxies, and port restrictions). In this way you can hard code your host names in applications such as Mercurial or Git, and they automatically adapt to your existing network.
  10. The entire application, including the configuration files, are Python code, so you have considerable freedom to change the configuration based on things like the name of the machine or the user when generating the SSH config file.

Trivial Configuration

The hosts that you would like to connect to are described in the hosts.py file. A very simple hosts.py file would look like this:

from sshconfig import HostEntry

class Zeebra(HostEntry):
    user = 'herbie'
    hostname = 'zeebra.he.net'

Hosts are described by directly subclassing HostEntry. Attributes are added that are generally converted to fields in the ssh config file.

The contents of ~/.ssh/config are replaced when you run:

gensshconfig

The above hosts.py file is converted into the following ssh config file:

# SSH Configuration for generic network
# Generated at 1:04 PM on 22 July 2014.

#
# HOSTS
#

host zeebra
    user herbie
    hostname zeebra.he.net
    forwardAgent no

The transformation between a host entry in the hosts.py file and the ssh config file could be affected by the network you are on and any command line options that are specified to gensshconfig, but in this case it is not. Notice that the class name is converted to lower case when creating the hostname.

Configuration

The configuration of sshconfig involves two files, config.py and hosts.py. In config.py you describe networks, proxies, locations, and general defaults. In hosts.py, you describe the machines you would like to connect to on a regular basis.

Config

A typical config.py file would start with would look like:

#
# SSH Config -- Basic Network Configuration
#
# Defines known networks. Recognizes networks by the MAC addresses of their
# routers, can use this information to set default location, ports, init
# script and proxy.
#

from sshconfig import NetworkEntry

# Characteristics of the known networks
class Home(NetworkEntry):
    routers = ['a8:93:14:8a:e4:31']   # Router MAC addresses
    location = 'home'

class Work(NetworkEntry):
    routers = ['f0:90:76:9c:b1:37']   # Router MAC addresses
    location = 'home'

class WorkWireless(NetworkEntry):
    routers = ['8b:38:10:3c:1e:fe']   # Router MAC addresses
    location = 'home'

class Library(NetworkEntry):
    # Blocks port 22
    routers = [
        'e4:c7:22:f2:9a:46',  # Wireless
        '00:15:c7:01:a7:00',  # Wireless
        '00:13:c4:80:e2:89',  # Ethernet
        '00:15:c7:01:a7:00',  # Ethernet
    ]
    ports = [80, 443]
    location = 'home'
    init_script = 'activate_library_network'

class DC_Peets(NetworkEntry):
    routers = ['e4:15:c4:01:1e:95']  # Wireless
    location = 'washington'
    init_script = 'unlock-peets'

# Preferred networks, in order. If one of these networks are not available,
# another will be chosen at random from the available networks.
PREFERRED_NETWORKS = ['Work']

# Location of output file (must be an absolute path)
CONFIG_FILE = "~/.ssh/config"

# Attribute overrides for all hosts
OVERRIDES = """
    Ciphers aes256-ctr,aes128-ctr,arcfour256,arcfour,aes256-cbc,aes128-cbc
"""

# Attribute defaults for all hosts
DEFAULTS = """
    ForwardX11 no

    # This will keep a seemingly dead connection on life support for 10
    # minutes before giving up on it.
    TCPKeepAlive no
    ServerAliveInterval 60
    ServerAliveCountMax 10

    # Enable connection sharing
    ControlMaster auto
    ControlPath /tmp/ssh_mux_%h_%p_%r
"""

# Known proxies
PROXIES = {
    'work_proxy': 'socat - PROXY:webproxy.ext.workinghard.com:%h:%p,proxyport=80',
    'school_proxy': 'proxytunnel -q -p sproxy.fna.learning.edu:1080 -d %h:%p',
    'tunnelr_proxy': 'ssh tunnelr -W %h:%p',
        # it is not necessary to add tunnelr as a proxy, you can always
        # specify a host as a proxy, and if you do you will get this
        # proxyCommand by default. The only benefit adding this entry to
        # PROXIES provides is that tunnelr is listed in the available proxies
        # when using the --available command line option.
}

# My locations
LOCATIONS = {
   'home': 'San Francisco California',
   'washington': 'Washington DC',
   'toulouse': 'Toulouse France',
}

All of these entries are optional.

Subclassing NetworkEntry creates a network description that is described with the attributes. A subclass will inherit all the attributes of its parent. The following attributes are interpreted.

key:
Name used when specifying the network. If not present, the class name in lower case is used.
description:
A description of the network. If not given, the class name is use with the following modifications: - underscores are replaced by spaces - a space is added to separate a lower case to upper case transition - double underscores are replaced by ‘ - ‘
routers:
A list of MAC addresses for the router that are used to identify the network. To find these, connect to the network and run the /sbin/arp command.
location:
The default setting for the location (value should be chosen from LOCATIONS) when this network is active.
ports:
The default list of ports that should be available when this network is active.
init_script:

A script that should be run when on this network. May be a string or a list of strings. If it is a list of strings they are joined together to form a command.

The unlock-peets script is included as an example of such a script. It is used to automate the process of accepting the terms & conditions on the click-through page. Unfortunately, while unlock-peets represents a reasonable example, each organization requires the basic script to be customized to fit their particular click-through pages.

To write a script it is helpful to understand how the unlocking process works. The organizations that lock their wifi generally allow your computer to directly connect to their access point, however their firewall is configured to block any network traffic from unapproved devices. As you connect, they grab the MAC address of your computer’s wifi. They then watch for web requests emanating from your computer, which they then discard and redirect your browser to their router which offers up a page that allows you to accept their terms and conditions. This page is customized particularly for you: it contains your MAC address. When you accept, your MAC address is returned to the router along with your acceptance, and the router then rewrites its firewall rules to allow your computer to access the internet. After some period of time (an hour? a day?) the rules are discarded and you loose your connection to the Internet. All of this tremendously abuses Internet protocols, and causes its visitors headaches because this hack is not compatible with HTTPS or VPN traffic. So for it to work, you must request a plain HTTP site with any VPNs disabled, and plain HTTP sites are disappearing. The headaches this cause seems to provide very little value to anyone. They break the Internet so as to force you to accept their terms and conditions, which they presumably feel protects them from lawsuits, but it is hard to imagine anybody suing the owner of a public wifi for the actions of an anonymous user. But I digress.

Debugging init scripts can be difficult because once you successfully unlock the wifi, it generally remains unlocked for at least an hour, and maybe until the next day, which limits your ability to test your script. However, in Linux it is possible to change your MAC address. If you do so, the router no longer recognizes you and you have to go through the unlock process again, which allows you to thoroughly exercise and debug your script. To change your MAC address, right-click on the Network Manager applet, and select ‘Edit Connection …’, select the connection you are using, and click ‘Edit’, then copy the ‘Device MAC address’ into ‘Cloned MAC address’ and change a few digits. The digits are hexadecimal, so choose values between 0-9A-F. Then click ‘Save’, ‘Close’, and restart your network connection.

proxy:
The name of the proxy to use by default when this network is active.

PREFERRED_NETWORKS specifies a list of preferred networks. It is useful your computer can access multiple networks simultaneously, such as when you are using a laptop connected to a wired network but you did not turn off the wireless networking. SSH is configured for the first network on the PREFERRED_NETWORKS list that is available. If none of the preferred networks are available, then an available known network is chosen at random. If no known networks are available, SSH is configured for a generic network. In the example, the Work network is listed in the preferred networks because Work and WorkWireless would expected to often be available simultaneously, and Work is the wired network and is considerably faster than WorkWireless.

CONFIG_FILE specifies the name of the ssh config file; the default is ~/.ssh/config. The path to the SSH config file should be an absolute path.

OVERRIDES contains ssh directives that are simply added to the top of the ssh config file. Such settings override any settings specified in the host entries. Do not place ForwardAgent in OVERRIDES. It will be added on the individual hosts and only set to yes if they are trusted.

DEFAULTS contains ssh directives that are added to the bottom of the ssh config file. Such settings act as defaults.

PROXIES allows you to give names to proxyCommand values. These names can then be specified on the command line so that all hosts use the proxy.

LOCATIONS is a dictionary of place names and descriptions of where you are likely to be located. It is needed only if you use the locations feature.

Hosts

A more typical hosts.py file would generally contain many host specifications.

You subclass HostEntry to specify a host and then add attributes to configure its behavior. Information you specify is largely just placed in the ssh config file unmodified except:

  1. The class name is converted to lower case to make it easier to type.
  2. ‘forwardAgent’ is added and set based on whether the host is trusted.
  3. Any attribute that starts with underscore (_) is ignored and so can be used to hold intermediate values.

In most cases, whatever attributes you add to your class get converted into fields in the ssh host description. However, there are several attributes that are intercepted and used by SSH Config. They are:

description:
A string that is added as a comment above the ssh host description.
aliases:
A list of strings, each of which is added to the list of names that can be used to refer to this host.
trusted:
Indicates that the base host should be trusted. Currently that means that agent forwarding will be configured for the non-tunneling version of the host.
tun_trusted:
Indicates that the tunneling version of the host should be trusted. Currently that means that agent forwarding will be configured for the tunneling version of the host.
guests:
A list of machines that are accessed using this host as a proxy.

Here is a example:

class DigitalOcean(HostEntry):
    description = "Web server"
    aliases = ['do', 'web']
    user = 'herbie'
    hostname = '107.170.65.89'
    identityFile = 'digitalocean'

This results in the following entry in the ssh config file:

# Web server
host digitalocean do web
    user herbie
    hostname 107.170.65.89
    identityFile /home/herbie/.ssh/digitalocean
    identitiesOnly yes
    forwardAgent no

When specifying the identityFile, you can either use an absolute or relative path. The relative path will be relative to the directory that will contain the ssh config file. Specifying identityFile results in identitiesOnly being added.

SSHconfig provides two utility functions that you can use in your hosts file to customize it based on either the hostname or username that are being used when gensshconfig is run. They are gethostname() and getusername() and both can be imported from sshconfig. For example, I generally use a different identity (ssh key) from each machine I operate from. To implement this, at the top of my hosts file I have:

from sshconfig import gethostname

class DigitalOcean(HostEntry):
    description = "Web server"
    aliases = ['do', 'web']
    user = 'herbie'
    hostname = '107.170.65.89'
    identityFile = gethostname()

Ports

If a host is capable of accepting connections on more than one port, you should use the choose() method of the ports object to select the appropriate port.

For example:

from sshconfig import HostEntry, ports

class Tunnelr(HostEntry):
    description = "Proxy server"
    user = 'kundert'
    hostname = 'fremont.tunnelr.com'
    port = ports.choose([22, 80, 443])
    identityFile = 'tunnelr'

An entry such as this would be used when sshd on the host has been configured to accept ssh traffic on a number of ports, in this case, ports 22, 80 and 443.

The actual port used is generally the first port given in the list provided to choose(). However this behavior can be overridden with the –ports (or -p) command line option. For example:

gensshconfig --ports=80,443

or:

gensshconfig -p80,443

This causes ports.choose() to return the first port given in the –ports specification if it is given anywhere in the list of available ports given as an argument to choose(). If the first port does not work, it will try to return the next one given, and so on. So in this example, port 80 would be returned. If -p443,80 were specified, then port 443 would be used.

You can specify as many ports as you like in a –ports specification, just separate them with a comma and do not add spaces.

In this next example, we customize the proxy command based on the port chosen:

class Home(HostEntry):
    description = "Home server"
    user = 'herbie'
    hostname = {
        'home': '192.168.1.32',
        'default': '231.91.164.05'
    }
    port = ports.choose([22, 80])
    if port in [80]:
        proxyCommand = 'socat - PROXY:%h:127.0.0.1:22,proxyport=%p'
    identityFile = 'my2014key'
    dynamicForward = 9999

An entry such as this would be used if sshd is configured to directly accept traffic on port 22, and Apache is configured to act as a proxy for ssh on ports 80 and 443 (see SSH via HTTP <http://www.nurdletech.com/linux-notes/ssh/via-http.html>.

If you prefer, you can use proxytunnel rather than socat in the proxy command:

proxyCommand = 'proxytunnel -q -p %h:%p -d 127.0.0.1:22'

Attribute Descriptions

Most attributes can be given as a two element tuple. The first value in the pair is used as the value of the attribute, and the second should be a string that is added as a comment to describe the attribute. For example:

hostname = '65.19.130.60', 'fremont.tunnelr.com'

is converted to:

hostname 65.19.130.60
   # fremont.tunnelr.com

Hostname

The hostname may be a simple string, or it may be a dictionary. If given as a dictionary, each entry will have a string key and string value. The key would be the name of the network (in lower case) and the value would be the hostname or IP address to use when on that network. One of the keys may be ‘default’, which is used if the network does not match one of the given networks. For example:

class Home(HostEntry):
    hostname = {
        'home': '192.168.0.1',
        'default': '74.125.232.64'
   }

When on the home network, this results in an ssh host description of:

host home
    hostname 192.168.0.1
    forwardAgent no

When not on the home network, it results in an ssh host description of:

host home
    hostname 74.125.232.64
    forwardAgent no

The ssh config file entry for this host will not be generated if not on one of the specified networks and if default is not specified.

It is sometimes appropriate to set the hostname based on which host you are on rather than on which network. For example, if a sshconfig host configuration file is shared between multiple machines, then it is appropriate to give the following for a host which may become localhost:

class Home(HostEntry):
    if gethostname() == 'home':
        hostname = '127.0.0.1'
    else:
        hostname = '192.168.1.4'

Location

It is also possible to choose the hostname based on location. The user specifies location using:

gensshconfig --location=washington

or:

gensshconfig -lwashington

You can get a list of the known locations using:

gensshconfig --available

To configure support for locations, you first specify your list of known locations in LOCATIONS:

LOCATIONS = {
   'home': 'San Francisco California',
   'washington': 'Washington DC',
   'toulouse': 'Toulouse France',
}

Then you must configure your hosts to use the location. To do so, you use the choose() method to set the location. The choose() method requires three things:

  1. A dictionary that gives hostnames or IP addresses and perhaps descriptive comment as a function of the location. These locations are generally specific to the host.
  2. Another dictionary that maps the user’s locations into the host’s locations.
  3. A default location.

For example:

from sshconfig import HostEntry, locations, ports

class Tunnelr(HostEntry):
    description = "Commercial proxy server"
    user = 'kundert'
    hostname = locations.choose(
       locations = {
           'sf':          ("65.19.130.60",    "Fremont, CA, US (fremont.tunnelr.com)"),
           'la':          ("173.234.163.226", "Los Angeles, CA, US (la.tunnelr.com)"),
           'wa':          ("209.160.33.99",   "Seattle, WA, US (seattle.tunnelr.com)"),
           'tx':          ("64.120.56.66",    "Dallas, TX, US (dallas.tunnelr.com)"),
           'va':          ("209.160.73.168",  "McLean, VA, US (mclean.tunnelr.com)"),
           'nj':          ("66.228.47.107",   "Newark, NJ, US (newark.tunnelr.com)"),
           'ny':          ("174.34.169.98",   "New York City, NY, US (nyc.tunnelr.com)"),
           'london':      ("109.74.200.165",  "London, UK (london.tunnelr.com)"),
           'uk':          ("31.193.133.168",  "Maidenhead, UK (maidenhead.tunnelr.com)"),
           'switzerland': ("178.209.52.219",  "Zurich, Switzerland (zurich.tunnelr.com)"),
           'sweden':      ("46.246.93.78",    "Stockholm, Sweden (stockholm.tunnelr.com)"),
           'spain':       ("37.235.53.245",   "Madrid, Spain (madrid.tunnelr.com)"),
           'netherlands': ("89.188.9.54",     "Groningen, Netherlands (groningen.tunnelr.com)"),
           'germany':     ("176.9.242.124",   "Falkenstein, Germany (falkenstein.tunnelr.com)"),
           'france':      ("158.255.215.77",  "Paris, France (paris.tunnelr.com)"),
       },
       maps={
           'home':       'sf',
           'washington': 'va',
           'toulouse':   'france',
       },
       default='sf'
    )
    port = ports.choose([
        22, 21, 23, 25, 53, 80, 443, 524, 5555, 8888
    ])
    identityFile = 'tunnelr'

Now if the user specifies –location=washington on the command line, then it is mapped to the host location of va, which becomes mclean.tunnelr.com (209.160.73.168). Normally, users are expected to choose a location from the list given in LOCATIONS. As such, every maps argument should support each of those locations. However, a user may given any location they wish. If the location given is not found in maps, then it will be looked for in locations, and if it is not in locations, the default location is used.

Forwards

When forwards are specified, two ssh host entries are created. The first does not include forwarding. The second has the same name with ‘-tun’ appended, and includes the forwarding. The reason this is done is that once one connection is setup with forwarding, a second connection that also attempts to performing forwarding will produce a series of error messages indicating that the ports are in use and so cannot be forwarded. Instead, you should only use the tunneling version once when you want to set up the port forwards, and you the base entry at all other times. Often forwarding connections are setup to run in the background as follows:

ssh -f -N home-tun

If you have set up connection sharing using ControlMaster and then run:

ssh home

SSH will automatically share the existing connection rather than starting a new one.

Both local and remote forwards should be specified as lists. The lists can either be simple strings, or can be tuple pairs if you would like to give a description for the forward. The string that describes the forward has the syntax: ‘lclHost:lclPort rmtHost:rmtPort’ where lclHost and rmtHost can be either a host name or an IP address and lclPort and rmtPort are port numbers. For example:

'11025 localhost:25'

The local host is used to specify what machines can connect to the port locally. If the GatewayPorts setting is set to yes on the SSH server, then forwarded ports are accessible to any machine on the network. If the GatewayPorts setting is no, then the forwarded ports are only available from the local host. However, if GatewayPorts is set to clientspecified, then the accessibility of the forward address is set by the local host specified. For example:

5280 localhost:5280 accessible only from localhost
localhost:5280 localhost:5280 accessible only from localhost
*:5280 localhost:5280 accessible from anywhere
0.0.0.0:5280 localhost:5280 accessible from anywhere
lucifer:5280 localhost:5280 accessible from lucifer
192.168.0.1:5280 localhost:5280 accessible from 192.168.0.1

The VNC function is provided for converting VNC host and display number information into a setting suitable for a forward. You can give the local display number, the remote display number, and the remote host name (from the perspective of the remote ssh server) and the local host name. For example:

VNC(lclDispNum=1, rmtHost='localhost', rmtDispNum=12)

This allows a local VNC client viewing display 1 to show the VNC server running on display 12 of the SSH server host.

If you give a single number, it will use it for both display numbers. If you don’t give a name, it will use localhost as the remote host (in this case localhost represents the remote ssh server). So the above VNC section to the local forwards could be shortened to:

VNC(12)

if you configured the local VNC client to connect to display 12.

An example of many of these features:

from sshconfig import HostEntry, ports, locations, VNC

class Home(HostEntry):
    description = "Lucifer Home Server"
    aliases = ['lucifer']
    user = 'herbie'
    hostname = {
        'home': '192.168.0.1',
        'default': '74.125.232.64'
    }
    port = ports.choose([22, 80])
    if port in [80]:
        proxyCommand = 'socat - PROXY:%h:127.0.0.1:22,proxyport=%p'
    trusted = True
    identityFile = gethostname()
    localForward = [
        ('30025 localhost:25',  "Mail - SMTP"),
        ('30143 localhost:143', "Mail - IMAP"),
        ('34190 localhost:4190', "Mail - Seive"),
        ('39100 localhost:9100', "Printer"),
        (VNC(lclDispNum=1, rmtDispNum=12), "VNC"),
    ]
    dynamicForward = 9999

On a foreign network it produces:

# Lucifer Home Server
host home lucifer
    user herbie
    hostname 74.125.232.64
    port = 22
    identityFile /home/herbie/.ssh/teneya
    identitiesOnly yes
    forwardAgent yes

# Lucifer Home Server (with forwards)
host home-tun lucifer-tun
    user herbie
    hostname 74.125.232.64
    port = 22
    identityFile /home/herbie/.ssh/teneya
    identitiesOnly yes
    forwardAgent yes
    localForward 11025 localhost:25
        # Mail - SMTP
    localForward 11143 localhost:143
        # Mail - IMAP
    localForward 14190 localhost:4190
        # Mail - Sieve
    localForward 19100 localhost:9100
        # Printer
    localForward 5901 localhost:5912
        # VNC
    dynamicForward 9999
    exitOnForwardFailure yes

Guests

The ‘guests’ attribute is a list of hostnames that would be accessed by using the host being described as a proxy. The attributes specified are shared with its guests (other than hostname, port, and port forwards). The name used for the guest in the ssh config file would be the hostname combined with the guest name using a hyphen.

For example:

class Farm(HostEntry):
    description = "Entry Host to Machine farm"
    aliases = ['earth']
    user = 'herbie'
    hostname = {
        'work': '192.168.1.16',
        'default': '231.91.164.92'
    }
    trusted = True
    identityFile = 'my2014key'
    guests = [
        ('jupiter', "128GB Compute server"),
        ('saturn', "96GB Compute server"),
        ('neptune', "64GB Compute server"),
    ]
    localForward = [
        (VNC(dispNum=21, rmtHost=jupiter), "VNC on Jupiter"),
        (VNC(dispNum=22, rmtHost=saturn), "VNC on Saturn"),
        (VNC(dispNum=23, rmtHost=neptune), "VNC on Neptune"),
    ]

On a foreign network produces:

# Entry Host to Machine Farm
host farm earth
    user herbie
    hostname 231.91.164.92
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent yes

# Entry Host to Machine Farm (with forwards)
host farm-tun earth-tun
    user herbie
    hostname 231.91.164.92
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent yes
    localForward 5921 jupiter:5921
        # VNC on jupiter
    localForward 5922 saturn:5922
        # VNC on Saturn
    localForward 5923 neptune:5923
        # VNC on Neptune

# 128GB Compute Server
host farm-jupiter
    hostname jupiter
    proxyCommand ssh host -W %h:%p
    user herbie
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent yes

# 96GB Compute Server
host farm-saturn
    hostname saturn
    proxyCommand ssh host -W %h:%p
    user herbie
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent yes

# 64GB Compute Server
host farm-netpune
    hostname neptune
    proxyCommand ssh host -W %h:%p
    user herbie
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent yes

Subclassing

Subclassing is an alternative to guests that gives more control over how the attributes are set. When you create a host that is a subclass of another host (the parent), the parent is configured to be the proxy and only the ‘user’ and ‘identityFile’ attributes are copied over from the parent, but these can be overridden locally.

For example:

class Jupiter(Farm):
    description = "128GB Compute Server"
    hostname = 'jupiter'
    tun_trusted = True
    remoteForward = [
        ('14443 localhost:22', "Reverse SSH tunnel used by sshfs"),
    ]

Notice, that Jupiter subclasses Farm, which was described in an example above. This generates:

# 128GB Compute Server
host jupiter
    user herbie
    hostname jupiter
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent no
    proxyCommand ssh farm -W %h:%p

# 128GB Compute Server (with forwards)
host jupiter-tun
    user herbie
    hostname jupiter
    identityFile /home/herbie/.ssh/my2014key
    identitiesOnly yes
    forwardAgent no
    proxyCommand ssh farm -W %h:%p
    remoteForward 14443 localhost:22

If you contrast this with farm-jupiter above, you will see that the name is different, as is the trusted status (farm-jupiter inherits ‘trusted’ from Host, whereas jupiter does not). Also, there are two versions, one with port forwarding and one without.

Proxies

Some networks block connections to port 22. If your desired host accepts connections on other ports, you can use the –ports feature described above to work around these blocks. However, some networks block all ports and force you to use a proxy. Or, if you do have open ports but your host does not accept ssh traffic on those ports, you can sometimes use a proxy to access your host.

Available proxies are specified by adding PROXIES to the hosts.py file. Then, if you would like to use a proxy, you use the –proxy (or -P) command line argument to specify the proxy by name. For example:

PROXIES = {
    'work_proxy':   'corkscrew webproxy.ext.workinghard.com 80 %h %p',
    'school_proxy': 'corkscrew sproxy.fna.learning.edu 1080 %h %p',
}

Two HTTP proxies are described, the first capable of bypassing the corporate firewall and the second does the same for the school’s firewall. Each is a command that takes its input from stdin and produces its output on stdout. The program ‘corkscrew’ is designed to proxy a TCP connection through an HTTP proxy. The first two arguments are the host name and port number of the proxy. corkscrew connects to the proxy and passes the third and fourth arguments, the host name and port number of desired destination.

There are many alternatives to corkscrew. One is socat:

PROXIES = {
    'work_proxy':   'socat - PROXY:webproxy.ext.workinghard.com:%h:%p,proxyport=80',
    'school_proxy': 'socat - PROXY:sproxy.fna.learning.edu:%h:%p,proxyport=1080',
}

Another alternative is proxytunnel:

PROXIES = {
    'work_proxy':   'proxytunnel -q -p webproxy.ext.workinghard.com:80 -d %h:%p',
    'school_proxy': 'proxytunnel -q -p sproxy.fna.learning.edu:1080 -d %h:%p',
}

When at work, you should generate your ssh config file using:

gensshconfig --proxy=work_proxy

or:

gensshconfig --Pwork_proxy

You can get a list of the pre-configured proxies using:

gensshconfig --available

It is also possible to use ssh hosts as proxies. For example, when at an internet cafe that blocks port 22, you can work around the blockage even if your host only supports 22 using:

gensshconfig --ports=80 --proxy=tunnelr

or:

gensshconfig -p80 --Ptunnelr

Using the –proxy command line argument adds a proxyCommand entry to every host that does not already have one (except the host being used as the proxy). In that way, proxies are automatically chained. For example, in the example given above Jupiter subclasses Farm, and so it naturally gets a proxyCommand that causes it to be proxied through Farm, but Farm does not have a proxyCommand. By running gensshconfig with –proxy=tunnelr, Farm will get the proxyCommand indicating it should proxy through tunnelr, but Jupiter retains its original proxyCommand. So when connecting to jupiter a two link proxy chain is used: packets are first sent to tunnelr, which then forwards them to farm, which forwards them to jupiter.

You can specify a proxy on the NetworkEntry for you network. If you do, that proxy will be used by default when on that network for all hosts that not on that network. A host is said to be on the network if the hostname is specifically given for that network. For example, assume you have a network configured for work:

class Work(NetworkEntry):
    # Work network
    routers = ['78:92:4d:2b:30:c6']
    proxy = 'work_proxy'

Then assume you have a host that is not configured for that network (Home) and one that is (Farm):

class Home(HostEntry):
    description = "Home Server"
    aliases = ['lucifer']
    user = 'herbie'
    hostname = {
        'home': '192.168.0.1',
        'default': '74.125.232.64'
    }
    proxyCommand = 'socat - PROXY:webproxy.ext.workinghard.com:%h:%p,proxyport=80'

class Farm(HostEntry):
    description = "Entry Host to Machine farm"
    aliases = ['mercury']
    user = 'herbie'
    hostname = {
        'work': '192.168.1.16',
        'default': '231.91.164.92'
    }

When on the work network, when you connect to Home you will use the proxy and when you connect to farm, you will not.

Release History

Release History

1.0

This version

History Node

TODO: Figure out how to actually get changelog content.

Changelog content for this version goes here.

Donec et mollis dolor. Praesent et diam eget libero egestas mattis sit amet vitae augue. Nam tincidunt congue enim, ut porta lorem lacinia consectetur. Donec ut libero sed arcu vehicula ultricies a non tortor. Lorem ipsum dolor sit amet, consectetur adipiscing elit.

Show More

Supported By

WebFaction WebFaction Technical Writing Elastic Elastic Search Pingdom Pingdom Monitoring Dyn Dyn DNS HPE HPE Development Sentry Sentry Error Logging CloudAMQP CloudAMQP RabbitMQ Heroku Heroku PaaS Kabu Creative Kabu Creative UX & Design Fastly Fastly CDN DigiCert DigiCert EV Certificate Rackspace Rackspace Cloud Servers DreamHost DreamHost Log Hosting