stable-worldmodel 0.1.0

World Model Research Made Simple

stable-worldmodel

A platform for reproducible world model research and evaluation.

Installation · Quick Start · Environments · Solvers & Baselines · Documentation · Citation

---

stable-worldmodel provides a single, unified interface for the three stages of world model research — collecting data, training, and evaluating with model-predictive control — across a large suite of standardized environments. It ships with reference implementations of common baselines and planning solvers so research code can stay focused on the contribution that matters: the model and the objective.

Installation

From PyPI:

pip install stable-worldmodel            # base only
pip install 'stable-worldmodel[all]'     # + training, environments, and data formats

LeRobot dataset support is a separate opt-in extra (requires Python 3.12+): pip install 'stable-worldmodel[lerobot]'.

From source (development):

git clone https://github.com/galilai-group/stable-worldmodel
cd stable-worldmodel
uv venv --python=3.10 && source .venv/bin/activate
uv sync --extra all --group dev

Datasets and checkpoints are stored under $STABLEWM_HOME (defaults to ~/.stable_worldmodel/). Override the variable to point at your preferred storage location.

The library is in active development. APIs may change between minor versions.

Quick Start

import stable_worldmodel as swm
from stable_worldmodel.policy import WorldModelPolicy, PlanConfig
from stable_worldmodel.solver import CEMSolver

# 1. Collect a dataset
world = swm.World("swm/PushT-v1", num_envs=8)
world.set_policy(your_expert_policy)
world.collect("data/pusht_demo.lance", episodes=100, seed=0)

# 2. Load it and train your world model (format is autodetected)
dataset = swm.data.load_dataset("data/pusht_demo.lance", num_steps=16)
world_model = ...  # your model

# 3. Evaluate with model-predictive control
solver = CEMSolver(model=world_model, num_samples=300)
policy = WorldModelPolicy(solver=solver, config=PlanConfig(horizon=10))

world.set_policy(policy)
results = world.evaluate(episodes=50)
print(f"Success Rate: {results['success_rate']:.1f}%")

Reference implementations are provided in scripts/train/: lewm.py implements LeWM, and prejepa.py reproduces DINO-WM.

GPU utilization for LeWM trained with Push-T LanceDB dataset on a H200 GPU.

Data Formats

Recording, loading, and conversion all go through a small format registry. Pick the backend that matches your trade-off, or register your own.

Format	On-disk layout	Best for
lance	LanceDB table (episode-contiguous flat rows)	default — append-friendly, fast indexed reads
hdf5	single .h5 file (one dataset per column)	portable single-file artifact
folder	.npz columns + one JPEG per step	inspection, partial-key streaming
video	.npz columns + one MP4 per episode (decord)	long episodes, compact image storage
lerobot	lerobot://<repo_id> (read-only adapter)	training/eval directly on LeRobot Hub datasets

world.collect("data/pusht.lance", episodes=100)                  # default: lance
world.collect("data/pusht_video", episodes=100, format="video")  # mp4 episodes

ds = swm.data.load_dataset("data/pusht.lance", num_steps=16)     # autodetect
swm.data.convert("data/pusht.lance", "data/pusht_video",
                 dest_format="video", fps=30)                    # one-shot migration

Every writer accepts a mode kwarg ('append' (default), 'overwrite', 'error'); re-running world.collect extends the existing dataset rather than failing.

Throughput & storage benchmarks

Numbers below were produced by scripts/benchmark/compare_h5_lance.py and can be reproduced with it. Benchmarks use the PushT dataset from the LeWorldModel paper.

Throughput

Format	Source	Cache	samples/s	ms/step
HDF5	local	no-cache	1416.1	45.2
HDF5	local	cached	1474.0	43.4
LanceDB	local	no-cache	4814.8	13.3
LanceDB	local	cached	4431.3	14.4
Video	local	-	1330.6	48.1
LanceDB	s3	no-cache	3183.7	20.1
LanceDB	s3	cached	3253.2	19.7
HDF5	s3	no-cache	9.1	7032.5
HDF5	s3	cached	756.5	84.6

Storage size per format (local)

Format	Local size
HDF5	43.12 GB
LanceDB	13.31 GB
Video	496.29 MB

Environments

Top row: default appearance  ·  Bottom row: visual factor of variation

Environments are pulled from the DeepMind Control Suite, Gymnasium classic control, OGBench, Craftax, the Arcade Learning Environment (100+ Atari games), and classical world model benchmarks (Two-Room, PushT). Most environments ship with a set of factors of variation — independently controllable visual and physical parameters (lighting, textures, dynamics, morphology) — that make it straightforward to evaluate zero-shot generalization to distribution shifts without any additional setup. Adding a new environment only requires conforming to the Gymnasium interface.

Full environment list

Environment ID	# FoV
swm/PushT-v1	16
swm/TwoRoom-v1	17
swm/OGBCube-v0	11
swm/OGBScene-v0	12
swm/HumanoidDMControl-v0	7
swm/CheetahDMControl-v0	7
swm/HopperDMControl-v0	7
swm/ReacherDMControl-v0	8
swm/WalkerDMControl-v0	8
swm/AcrobotDMControl-v0	8
swm/PendulumDMControl-v0	6
swm/CartpoleDMControl-v0	6
swm/BallInCupDMControl-v0	9
swm/FingerDMControl-v0	10
swm/ManipulatorDMControl-v0	8
swm/QuadrupedDMControl-v0	7
swm/CartPoleControl-v1	10
swm/MountainCarControl-v0	5
swm/MountainCarContinuousControl-v0	4
swm/AcrobotControl-v1	11
swm/PendulumControl-v1	9
swm/FetchReach-v3	8
swm/FetchPush-v3	11
swm/FetchSlide-v3	11
swm/FetchPickAndPlace-v3	11
swm/CraftaxClassicPixels-v1	—
swm/CraftaxClassicSymbolic-v1	—
swm/CraftaxPixels-v1	—
swm/CraftaxSymbolic-v1	—
ALE/* (100+ Atari games)	—

Solvers and Baselines

Solver	Type
Cross-Entropy Method (CEM)	Sampling
Improved CEM (iCEM)	Sampling
Model Predictive Path Integral (MPPI)	Sampling
Predictive Sampling	Sampling
Gradient Descent (SGD, Adam)	Gradient
Projected Gradient Descent (PGD)	Gradient
Augmented Lagrangian	Constrained Opt

Baseline	Type
DINO-WM	JEPA
PLDM	JEPA
LeWM	JEPA
GCBC	Behaviour Cloning
GCIVL	RL
GCIQL	RL

Command-Line Interface

After installation, the swm command is available for inspecting/converting datasets, environments, and checkpoints without writing code:

swm datasets                                        # list cached datasets
swm inspect pusht_expert_train                      # inspect a specific dataset
swm envs                                            # list all registered environments
swm fovs PushT-v1                                   # show factors of variation for an environment
swm checkpoints                                     # list available model checkpoints
swm convert pusht_expert_train --dest-format video  # convert a dataset to another format

Documentation

The full documentation lives at galilai-group.github.io/stable-worldmodel, with API references, tutorials, and guides.

Built on stable-worldmodel

• C-JEPA
• LeWM

Citation

@misc{maes_lelidec2026swm-1,
  title  = {stable-worldmodel-v1: Reproducible World Modeling Research and Evaluation},
  author = {Lucas Maes and Quentin Le Lidec and Dan Haramati and
            Nassim Massaudi and Damien Scieur and Yann LeCun and
            Randall Balestriero},
  year   = {2026},
  eprint = {2602.08968},
  archivePrefix = {arXiv},
  primaryClass = {cs.AI},
  url    = {https://arxiv.org/abs/2602.08968},
}

Questions

Open an issue — happy to help.