starlyng-bcm-connection 0.0.1

A library for BCM functionality.

Starlyng BCM Connection

A Python library for executing Baseboard Management Controller (BMC) commands on servers using IPMI.

Features

• Execute BMC commands on remote servers using IPMI via execute_bcm_command
• Parallel execution of commands across multiple servers using threading
• Comprehensive error logging and handling
• Support for common IPMI operations:
  • Power management (status, on, off, cycle, reset)
  • System Event Log (SEL) operations
  • Chassis control
• Flexible server configuration through BCMServer class
• Secure connection handling with IPMI over LAN (LANPLUS)
• Command output capture and structured response handling

Prerequisites

Before you begin, ensure you have:

• Python 3.9 or higher installed
• ipmitool installed on your system:
  • Ubuntu: sudo apt-get install ipmitool
  • macOS: brew install ipmitool
• If outside local network, configure port forwarding on your router:
  • Forward BCM port 623 to each server's unique port (62300-62399)
  • Example: Forward port 62300 to 192.168.50.1:623, port 62301 to 192.168.50.2:623
  • Port range must be between 62300-62399

Installation

pip install starlyng-bcm-connection

Usage

Basic Example

from starlyng_bcm_connection import BCMServer, execute_bcm_command

# Create a BCM server instance
server = BCMServer(
    bcm_ip="192.168.1.1",
    bcm_user="admin"
    bcm_pass="password"
    bcm_port=623
)

# Execute a command
# Pass server in a list since execute_bcm_command expects List[BCMServer]
result = execute_bcm_command([server], "power status")
print(result)

Available BMC Commands

Common IPMI commands you can execute:

• power status - Get power status
• power on - Power on the server
• power off - Power off the server
• power cycle - Power cycle the server
• power reset - Reset the server

Contributing

1. Fork the project
2. Create your feature branch (git checkout -b feature/YourFeature)
3. Commit your changes (git commit -am 'Add some YourFeature')
4. Push to the branch (git push origin feature/YourFeature)
5. Open a pull request

Contact

If you have any questions, please contact:

• GitHub: @justinsherwood