stlbench 1.0.9

STL preparation toolkit for resin 3D printing: uniform scaling, bed packing, fill, autopack.

stlbench

STL preparation toolkit for resin 3D printing.

stlbench takes STL files and prepares them for SLA/DLP printers: automatic support-minimising orientation, uniform scaling to fit the build volume, packing parts onto rectangular print plates, filling the bed with copies, and a flexible job-file pipeline for mixing raw and pre-prepared models. Support generation and hollowing are not performed — use your slicer (Lychee, Chitubox, PrusaSlicer, Elegoo SatelLite, etc.) after export.

Installation

pip install stlbench

Development install

git clone https://github.com/NikitaDmitryuk/stlbench.git
cd stlbench
poetry install --with dev

Quick Start

Run stlbench --help for the command cheatsheet. The most common workflows:

# 1a. Generate a printer profile (edit width_mm / depth_mm / height_mm for your machine)
stlbench config init -o my_printer.toml

# 1b. Or generate a job-file template (includes [pipeline] and [[parts]] sections)
stlbench config job -o job.toml

# 2a. Full pipeline in one command: scale → orient → layout (recommended)
stlbench prepare -i ./parts -o ./plates -c my_printer.toml

# 2b. Mix raw and pre-prepared parts using a job file
stlbench job job.toml -o ./plates

# 3. Or run individual steps manually:
stlbench info    -i ./parts                -c my_printer.toml   # inspect dimensions
stlbench orient  -i ./parts -o ./oriented  -c my_printer.toml   # minimise supports
stlbench scale   -i ./oriented -o ./scaled -c my_printer.toml   # fit to build volume
stlbench layout  -i ./scaled -o ./plates   -c my_printer.toml   # pack onto plates

# Scale + pack all on one plate (no separate scale/layout steps)
stlbench autopack -i ./parts -o ./packed -c my_printer.toml

# Fill the bed with copies of a single part
stlbench fill -i ./part.stl -o ./filled -c my_printer.toml --scale

No config file? Specify the build volume inline as three numbers (X, Y, Z) in mm:

stlbench prepare -i ./parts -o ./plates -p "153.36,77.76,165"

Commands

prepare — Full pipeline: scale → orient → layout

stlbench prepare -i ./parts -o ./plates -c my_printer.toml

Runs the three preparation steps in the optimal order for resin printing:

1. Scale — finds the largest scale factor that fits every part inside the build volume (SO(3) orientation search), then applies a uniform scale to all parts.
2. Orient — rotates each scaled part to minimise overhanging surface area, constrained so the part still fits the build volume.
3. Layout — packs the oriented parts onto the minimum number of plates, distributed as evenly as possible.

Exports one plate_NN.3mf + plate_NN.json manifest per plate.

Key options: --overhang-angle (default 45°), --orient-candidates (default 200), --gap-mm, --post-fit-scale, --dry-run, --recursive, --resume.

---

job — Per-part configurable pipeline from a job file

stlbench job job.toml -o ./plates

Runs a flexible pipeline where each part can have its own set of steps. Useful when some models are already oriented and supported (they only need packing) while others need the full scale → orient → layout treatment. All parts end up on the same plates.

Example job.toml:

[printer]
width_mm  = 153.36
depth_mm  = 77.76
height_mm = 165.0

[scaling]
bed_margin     = 0.02
post_fit_scale = 0.95

[packing]
gap_mm = 2.0

[pipeline]
default_steps = ["scale", "orient", "layout"]   # default for parts without explicit steps

[[parts]]
path = "models/gandalf.stl"          # uses default_steps

[[parts]]
path = "models/staff.stl"
steps = ["scale", "layout"]          # scale but skip orient

[[parts]]
path = "supported/sword.stl"
steps = ["layout"]                   # already prepared — pack only

Valid step sequences (layout must always be last):

steps	What happens
["scale", "orient", "layout"]	SO(3) search → global scale → Tweaker-3 orient → pack
["orient", "scale", "layout"]	Tweaker-3 orient → scale from oriented AABB → pack
["scale", "layout"]	SO(3) search → global scale → pack
["orient", "layout"]	Tweaker-3 orient → pack
["layout"]	Pack only (model already prepared)

Global scale is computed once across all parts that include the scale step, so they all receive exactly the same scale factor.

Key options: --candidates, --overhang-angle, --rotation-samples, --grid-step, --dry-run, --verbose.

---

info — Inspect models (read-only)

stlbench info -i ./parts -c my_printer.toml

Displays a table with AABB dimensions, volume, vertex/face counts, whether each part fits the bed, maximum scale factor, and how many copies would fit using fill. No files are written.

---

scale — Uniform scaling

stlbench scale -i ./parts -o ./scaled -c my_printer.toml

Computes a single scale factor so that every part fits inside the printer build volume. The largest part determines the factor; all parts share the same scale.

Key options: --dry-run, --no-upscale, --method sorted|conservative, --post-fit-scale, --suffix, --recursive.

---

orient — Minimise support structures

stlbench orient -i ./parts -o ./oriented -c my_printer.toml

For each STL file, searches for the rotation that minimises overhanging surface area (faces whose downward angle exceeds the threshold). Uses a two-phase search: discrete evaluation of candidate orientations derived from the model's face normals, followed by Nelder-Mead local refinement. The result is written with the bottom at z = 0.

When --config or --printer is supplied, the search is constrained to orientations that fit inside the build volume.

Key options: --overhang-angle (default 45°), --candidates (default 200), --dry-run, --suffix, --recursive.

---

layout — Pack parts onto plates

stlbench layout -i ./scaled -o ./plates -c my_printer.toml

Arranges already-scaled STL files onto rectangular print plates. Exports plate_NN.3mf + plate_NN.json with part positions. Multiple plates are created if all parts do not fit on one.

Key options: --dry-run, --gap-mm, --algorithm.

---

autopack — Scale + layout in one step

stlbench autopack -i ./parts -o ./packed -c my_printer.toml

Binary-searches for the maximum scale factor at which all parts fit onto a single plate simultaneously. Combines scale and layout into one step with the goal of keeping everything on one plate.

Key options: --orient/--no-orient, --overhang-angle, --dry-run, --gap-mm, --margin, --post-fit-scale.

---

fill — Maximum copies of one part

stlbench fill -i ./part.stl -o ./filled -c my_printer.toml

Packs as many copies of a single STL as possible onto one plate. Add --scale to fit the part to the bed first, --orient to minimise supports before filling.

Key options: --scale/--no-scale, --orient/--no-orient, --overhang-angle, --dry-run, --gap-mm.

---

config init — Create a printer profile

stlbench config init -o my_printer.toml

Writes a printer profile TOML with [printer], [scaling], and [packing] sections. Use --stdout to print without saving, or --force to overwrite.

config job — Create a job-file template

stlbench config job -o job.toml

Writes a job-file template with all sections pre-filled: [printer], [scaling], [packing], [pipeline], and two commented-out [[parts]] examples. Edit the file, fill in your STL paths, then run stlbench job job.toml -o ./plates.

Configuration

Printer profiles are TOML files. Generate a template with stlbench config init or see configs/mars5_ultra.toml for a complete example (ELEGOO Mars 5 Ultra).

Section	Keys	Purpose
[printer]	name, width_mm, depth_mm, height_mm	Build volume (required)
[scaling]	bed_margin (0–1), post_fit_scale (>0)	Margin and post-scale multiplier
[packing]	gap_mm	Surface-to-surface gap between parts
[pipeline]	default_steps	Default step list for job command
[[parts]]	path, steps	Per-part entries for job command

Output Files

All commands that write files produce 3MF output (except scale and orient, which write scaled/rotated STL files).

Command	Output
prepare	plate_NN.3mf, plate_NN.json per plate
job	plate_NN.3mf, plate_NN.json per plate
scale	*.stl (one per input part, in-place scaled)
orient	*.stl (one per input part, rotated)
layout	plate_NN.3mf, plate_NN.json per plate
autopack	plate_NN.3mf, plate_NN.json per plate
fill	fill_plate.3mf, fill_plate.json
info	Console output only

The 3MF files use only the core 3MF 2015/02 namespace and are compatible with Elegoo SatelLite, Chitubox, Lychee, and PrusaSlicer.

Examples

See examples/README.md for a step-by-step walkthrough using the included Gandalf model (3 parts tracked via Git LFS).

Package Structure

Module	Purpose
stlbench.cli	Typer CLI — all commands and argument parsing
stlbench.config	Pydantic schema (AppSettings, PartSpec) + TOML loader
stlbench.core	Scale factor computation, overhang analysis, orientation search
stlbench.packing	2D polygon packing onto plates (Shapely + custom grid)
stlbench.export	3MF and JSON manifest writers
stlbench.pipeline	Command runners (run_prepare, run_job, run_scale, etc.)

Limitations

• Non-manifold meshes may produce incorrect AABB or scale results. Repair first with a tool such as Meshmixer or Microsoft 3D Builder.
• Supports and hollowing are not generated — open the exported 3MF in your slicer.

License

MIT