storzandbickel-ble 0.1.6

Python library for controlling Storz & Bickel devices via Bluetooth Low Energy (BLE)

Storz & Bickel BLE Python Library

A Python library for controlling Storz & Bickel vaporizers (Volcano Hybrid, Venty/Veazy, and Crafty/Crafty+) via Bluetooth Low Energy (BLE).

Features

• Device Support: Volcano Hybrid, Venty, Veazy (qvap path), and Crafty/Crafty+
• Async/Await: Built with modern Python async/await patterns
• Type Safe: Full type hints and Pydantic models for data validation
• Home Assistant Ready: Follows Home Assistant best practices
• Controls: Temperature/heater/pump, boost/superboost, and settings APIs
• Diagnostics: Local run_analysis() helpers (no cloud upload)
• Workflows: Volcano preset workflow execution (balloon, flow1, flow2, flow3)

Installation

Using pip

pip install storzandbickel-ble

Using uv

uv pip install storzandbickel-ble

Quick Start

Basic Usage

import asyncio
from storzandbickel_ble import StorzBickelClient

async def main():
    # Create client
    client = StorzBickelClient()
    
    # Scan for devices
    devices = await client.scan(timeout=10.0)
    print(f"Found {len(devices)} devices")
    
    # Connect to first device
    if devices:
        device = await client.connect_device(devices[0])
        
        # Set target temperature
        await device.set_target_temperature(185.0)
        
        # Turn heater on
        await device.turn_heater_on()
        
        # Read current state
        print(f"Current temperature: {device.state.current_temperature}°C")
        print(f"Target temperature: {device.state.target_temperature}°C")
        
        # Disconnect
        await device.disconnect()

asyncio.run(main())

Home Assistant-Oriented Quickstart

The library patterns map cleanly to HA coordinator/entity flows:

• discover/connect once
• keep notifications enabled as the primary state path
• call update_state() for startup reconciliation or recovery
• use explicit exceptions and availability_transition_count for clean availability handling

Device-Specific Examples

Crafty/Crafty+

import asyncio
from storzandbickel_ble import StorzBickelClient
from storzandbickel_ble.models import DeviceType

async def main():
    client = StorzBickelClient()
    
    # Scan for Crafty devices
    devices = await client.scan(timeout=10.0, device_type=DeviceType.CRAFTY)
    
    if devices:
        # Connect to first Crafty device
        crafty = await client.connect_device(devices[0])
        
        # Update state to get current values
        await crafty.update_state()
        
        # Check temperatures
        print(f"Current temperature: {crafty.state.current_temperature}°C")
        print(f"Target temperature: {crafty.state.target_temperature}°C")
        
        # Set target temperature
        await crafty.set_target_temperature(185.0)
        print(f"Set target temperature to 185°C")
        
        # Verify the change
        await crafty.update_state()
        print(f"New target temperature: {crafty.state.target_temperature}°C")
        
        await crafty.disconnect()

asyncio.run(main())

For additional per-device examples (Venty, Veazy, Volcano), see docs/usage.rst.

Workflow and Analysis APIs

import asyncio
from storzandbickel_ble import StorzBickelClient

async def main():
    client = StorzBickelClient()
    volcano = await client.connect_by_name("S&B VOLCANO")

    # Volcano workflow presets: balloon, flow1, flow2, flow3
    await volcano.run_workflow_preset("flow1")

    # Local diagnostics summary (no cloud upload)
    report = await volcano.run_analysis()
    print(report["ok"], report["warnings"], report["errors"])

    await volcano.disconnect()

asyncio.run(main())

Device Support Matrix

Device	Temperature	Heater	Battery	Pump	Boost/Superboost	Vibration	Brightness	Workflow Presets	Local Analysis
Volcano Hybrid	✅	✅	❌	✅	❌	✅	✅	✅	✅
Venty	✅	✅	✅	❌	✅	✅	✅	❌	✅
Veazy	✅	✅	✅	❌	✅	✅	✅	❌	✅
Crafty/Crafty+	✅	✅	✅	❌	✅	✅	✅	❌	✅

Supported Functions by Family

Function	Volcano	Venty	Veazy	Crafty
Discovery and connect	✅	✅	✅	✅
Real-time notification state	✅	✅	✅	✅
Temperature target control	✅	✅	✅	✅
Heater control	✅	✅	✅	✅
Pump control	✅	❌	❌	❌
Brightness and vibration settings	✅	✅	✅	✅
Local diagnostics (run_analysis)	✅	✅	✅	✅
Workflow presets	✅	❌	❌	❌

Data Update Model

• Notification-driven updates are enabled on connect for supported characteristics.
• update_state() performs explicit reads/commands and is useful for an immediate refresh.
• Home Assistant integrations can treat notifications as the primary state stream and call update_state() for recovery or reconciliation.

Concurrency and Command Semantics

• Device-level BLE I/O is serialized internally to avoid overlapping reads/writes.
• Commands that require responses (for example, qvap command exchange) raise CommandTimeoutError when the response does not arrive in time.
• availability_transition_count tracks connect/disconnect transitions to help downstream integrations avoid noisy up/down logging.

Diagnostics Snapshot API

Each device exposes a sanitized diagnostics payload via:

snapshot = device.get_diagnostics_snapshot()

Snapshot payloads intentionally omit serial numbers from state to reduce sensitive data exposure in logs and diagnostics exports.

Known Limitations

• Firmware update workflows are not implemented in this library.
• Vendor cloud upload paths are intentionally out of scope.
• Some frontend-specific maintenance/analysis flows are not yet mirrored as first-class Python APIs.
• BLE behavior can vary by adapter, OS, and stack implementation.

Troubleshooting

• Ensure your BLE adapter is enabled and supports Bluetooth Low Energy.
• If a device is not discovered, retry scanning and confirm it is advertising.
• For flaky connections, disconnect and reconnect before issuing control commands.
• If command operations timeout, retry with a higher timeout and reduced command burst frequency.
• Use get_diagnostics_snapshot() when reporting issues to provide a sanitized runtime context.

Documentation

Full documentation is available at Read the Docs.

Requirements

• Python 3.14+
• Bluetooth adapter with BLE support
• Linux, macOS, or Windows

Dependencies

• bleak>=0.21.0 - BLE communication
• pydantic>=2.0.0 - Data validation

Development

Setup

# Clone repository
git clone https://github.com/yourusername/storzandbickel-ble.git
cd storzandbickel-ble

# Install with uv
uv pip install -e ".[dev]"

# Or with pip
pip install -e ".[dev]"

Running Tests

uv run pytest

Linting

uv run ruff check .
uv run ruff format .

Type Checking

uv run mypy src

Docker

Build

docker build -t storzandbickel-ble .

Run

docker run --rm storzandbickel-ble

Development

docker-compose up dev

License

MIT License - see LICENSE file for details

Disclaimer

This library is based on reverse engineering and is not officially supported by Storz & Bickel. Use at your own risk. The authors are not responsible for any damage to devices.

Contributing

Contributions are welcome! Please open an issue or submit a pull request.

References

• Protocol documentation: See s&b_procol.md
• BLE GATT specification: https://www.bluetooth.com/specifications/specs/core-specification/