中文 | English

swforge

让 SolidWorks 少一点重复操作，多一点可复用成果。

从参数化零件、材料配色，到装配、工程图、BOM 和 PDF，swforge 把常用机械设计步骤串起来，方便重复执行，也方便核对结果。

点击查看历史版本演示：建模、材料、工程图、标注与装配。演示录制于1.4.1，并非本次社区版的全部功能验收。

能帮你做什么

结果可以回读核对。 材料是否写入、颜色是否生效、尺寸是否附着、导出文件是否为本轮生成，都有相应检查入口。检查覆盖范围会明确说明，工程师仍需审核最终图纸。

与同类工具相比，侧重点在哪里

对比依据为上述项目官方介绍及swforge当前功能范围，不是同任务性能测试，也不代表其他产品缺少某项能力。swforge目前只实测SW2025 SP5，不以兼容版本数量或速度倍数作为宣传卖点。

安装与开始

需要Windows、Python 3.10+，以及你已有的SolidWorks安装和使用授权。当前实机环境为SolidWorks 2025 SP5。

pip install swforge
pip install "swforge[mcp,pdf]"  # AI助手接入与PDF校验
swforge --help

from swforge import PartBuilder

result = (PartBuilder(r"F:\out\plate.SLDPRT", material="Q235")
          .box("plate", 0, 120, 0, 80, 0, 20)
          .build(keep_open=False))
print(result.ok)

使用新输出路径并保留原模型。批处理时注意打开的SW文档数量，默认上限8份。

社区版与后续高级模块

本仓库及PyPI的Community版为MIT开源，允许商业使用。 包含建模、材料配色、装配、标注、BOM、图册、批处理、基础GB模板与校验、结果回读和文档保护。

高级GB条文审查、栅格/整套一致性审图及工艺规则编排实现，本次不包含在GitHub、源码包或wheel中，保留本地待拆分。未来高级模块是否发布及其许可将单独说明；当前没有把它们作为已上线商业功能出售。此前已MIT公开的版本继续遵循原许可。

基础GB功能也有覆盖范围：配合表为有限代号和尺寸段；字体尚未认证精确长仿宋；图纸检查不是完整GB认证、制造批准或强度认证。几何公差现有五类接口，本轮保存重开实测为平面度。详见社区版范围和验证说明。

MCP用户升级注意：1.7使用sw_discover、sw_describe、sw_invoke、sw_status四个入口。先发现操作，再按需查看和调用；Python和CLI继续保留社区版操作。见迁移说明。

致谢与反馈

保留原项目及依赖许可。感谢AssetMate MechDog等开源项目提供的工程图能力与经验。问题反馈请附SW版本、最小示例和回读结果，避免附带企业敏感模型。

中文 | English

swforge

Less repetitive work in SolidWorks. More reusable engineering results.

Build parameterized parts, apply materials and colors, prepare assemblies and drawings, and deliver BOMs and PDFs through repeatable workflows—with readback checks where supported.

What you can do

Checks expose their coverage and limitations. Generated drawings still require engineering review.

How it compares

This is a positioning comparison based on official descriptions, not a shared-task benchmark or a claim that competing products lack particular features. Only SW2025 SP5 has been tested locally; no speed multiplier or cross-version guarantee is claimed.

Install

Windows, Python 3.10+ and your own licensed SolidWorks installation are required.

pip install swforge
pip install "swforge[mcp,pdf]"
swforge --help

Keep source models and use new output paths. The default open-document limit is eight.

Open-source boundary

The GitHub repository and PyPI Community distributions are MIT-licensed, including commercial use. They include modeling, materials/colors, assemblies, annotations, BOMs, drawing books, batch APIs, basic GB templates/checks, readback and document protection.

Advanced GB clause review, raster/drawing-set review and process-rule orchestration implementations are withheld from this release, including the sdist and wheel. They remain local pending a separate module and licensing decision. They are not advertised as an available paid product. Earlier MIT releases retain their original license.

Basic GB coverage is finite: limited fit codes/size ranges, no certified exact long-FangSong font coverage, and no complete GB/manufacturing/strength certification. Five GD&T characteristics have interfaces; saved-and-reopened flatness was the native fixture tested this round. See scope and validation.

MCP migration: use sw_discover, sw_describe, sw_invoke and sw_status; original operation names are invoked through the gateway. Community Python and CLI operations remain available. See migration.

Acknowledgements

Original and dependency license notices are preserved. Thanks to AssetMate MechDog and other open-source projects. Report issues with your SW version and a minimal example; omit confidential models.