teramesh-hardware-tester 0.3.1

Scripts to test Teramesh hardware.

Hardware Tester v.0.3-beta

Prerequisites

If on RPi, pip install teramesh-hardware-tester[rpi], otherwise pip install teramesh-hardware-tester.

If NOT on RPi, skip -x test_relays.

List tests

teramesh-hardware-test --no-tests-execute

Run all tests on USB1

teramesh-hardware-test -p /dev/ttyUSB1

Run ONLY test_comms on USB1

teramesh-hardware-test -p /dev/ttyUSB1 -i test_comms

Run everything EXCEPT test_buzz on USB1

teramesh-hardware-test -p /dev/ttyUSB1 -x test_buzz

Hardware Configurer

Used to set mesh config via CLI:

$ teramesh-configure --help
Usage: teramesh-configure [OPTIONS]

Options:
  -p, --port TEXT                 USB port to open serial to.  [required]
  -b, --baudrate INTEGER          Port baudrate.
  --router-ssid TEXT              [required]
  --router-password TEXT          [required]
  --router-bssid TEXT
  --mesh-id TEXT                  [required]
  --mesh-password TEXT            [required]
  --mesh-type TEXT                One of: idle, root, node, leaf, sta.
  --channel INTEGER               0 for auto or 1-13 for set channel.
  --channel-switch-disable / --no-channel-switch-disable
  --router-switch-disable / --no-router-switch-disable
  --mqtt-uri TEXT                 [required]
  --help                          Show this message and exit.