terminal-status-panel

A small Python package that renders a colorful server status panel on login — best run from a profile.d snippet so it uses the full terminal width (see Running it at login). The full-width dashboard is laid out in five tiers:

• SYSTEM OVERVIEW (with a real, pre-rendered OS logo) beside UPDATES.

• SYSTEM STATUS — load & per-core CPU usage, memory/swap, and a filesystem usage table.

• DOCKER INFOS — Swarm key facts (summary + node health) above three stacked node matrices: Infrastruktur, Service, and standalone Container. Node health has three states: ✅ ready and active, ⚠️ ready but drained or paused (it accepts no tasks), 💀 unreachable; the summary line counts the non-operational ones, e.g. 5 nodes (1 drain, 1 down). Per-node replicas of the same service (e.g. kafka_kafka-<node> on every node) collapse into a single row; a stack with one logical service shows as one row named after the stack, a stack with several shows a header plus one sub-row per service (stack prefix and node name stripped). A trailing _<digits> is stripped the same way, so ordinal instances collapse too — a service deployed as heidi_connector_1, _2, _3 (one pinned instance per node, each with its own secrets) renders as a single heidi_connector row. That stripping is unconditional, and it has an accepted cost: if one instance is later removed from the deployment — or scaled to zero — its row just folds into the remaining two, and the panel reads ✅ 2/2 with nothing to say a third instance was ever expected. The gap is invisible only across a deployment change, never a failure — a failing instance still has a desired replica and renders 💀 or ⚠️ in both the Working column and its node cell, so a lost instance is silent but a broken one is not. Each row also carries a Working cell right after the service name: an icon plus the row's running/desired task count, e.g. ✅ 3/3, ⚠️ 2/5, 💀 0/3, · 0/0. Four rules keep that cell from over-claiming:

  • a service scaled to zero replicas renders · 0/0, not 💀 — that is a decision, not an outage;
  • for the four clustered services that actually run as Docker services (PostgreSQL, MongoDB, Kafka, RustFS — GlusterFS is queried on the host via sudo -n, not as a container, so it never gets a DOCKER INFOS row) the icon comes from that service's own CLUSTER HEALTH verdict while the count stays Docker's running/desired tally, so the two are allowed to disagree on purpose — except that a row measured 💀 or ⚠️ by its own replicas keeps that icon: no cluster-level ✅ or · can talk a row with nothing (or not everything) running into looking healthy;
  • under status-docker, which runs without the health section, a clustered service's cell falls back to · plus Docker's own count instead of a replica-derived ✅ — "five brokers are running" is not the claim this column makes — and the same fallback applies when the probe found no member of that service on this node, or the kind is not listed in health.enabled. Withholding the cluster's claim does not withhold Docker's, so such a row still renders 💀 0/3 when nothing runs and nothing is still starting;
  • a service where at least one task is still starting (not yet in running state) renders ⚠️ in the Working cell's icon in place of 💀, since a deploy in progress is not the same as a measured outage — a single starting task renders the bare icon ⚠️, and a row with no running tasks but some still starting renders ⚠️ 0/n. This differs from the node cell, which only shows ⚠️ 0/N when all tasks on that node are starting; a node cell with a mix of starting and failed tasks still shows 💀 0/N.

  A global-mode service (Traefik here) reports no replica count, so the denominator is the number of tasks Swarm actually scheduled — the same one docker service ls shows. Counting against every node instead would render a healthy global service as degraded for as long as one node is drained or a placement constraint applies.

  RustFS is the worked example for the second rule: its own CLUSTER HEALTH block can read 3/5 live (a minority of members measured unhealthy while the majority quorum still holds) even though every RustFS container is still up as a Docker task, so the row here reads ⚠️ 5/5 — a bare replica count with no cluster context would have shown a clean ✅ 5/5 and missed the degradation entirely. A member that was simply never measured (healthy is None — MongoDB reports its replica-set members but not their state) does not raise this warning; not measured is not a failure.

  Columns are otherwise the nodes (alphabetical), plus a description column. A node cell holding a single task keeps the bare glyph, ✅, ⚠️, or 💀 — the overwhelming majority of cells, since most rows place one task per node — and from two tasks up it carries the count right after the glyph, with no space in between: ✅N when all run, ⚠️X/N when some run, ⚠️0/N when none run and all are in a starting state, 💀0/N when none run and at least one has failed or entered another non-starting state. (Grouping can put more than one task on the same node — after ordinal stripping merges two originally separate services into one row, both can land on the same node, and that node's cell counts both.) See Icon vocabulary for what each glyph means — the Working column uses exactly the same vocabulary, no new glyphs, including ✗ when the underlying cluster probe itself failed (only …, the time-budget marker, never appears in this column).

• CLUSTER HEALTH — the clustered infrastructure services this node participates in (PostgreSQL, MongoDB, Kafka, GlusterFS, RustFS) with leader/member state, WireGuard peer handshake ages (TCP-probe fallback when passwordless sudo is unavailable), and DNS consistency checks. Every check runs concurrently under a shared time budget (default 5 s); a check that runs out renders …, deliberately distinct from ✗ for a check that actually failed. Each applicable service gets its own block (leader, members, warnings), and the blocks flow into as many columns as the terminal width allows — one column on a narrow terminal; services with no member on this node are not given a block each but summarised together on a single dim n/a here: <names> line. A service that should run here but has no running container (most likely a crash loop) still gets its own block, reading ✗ <service>: no running container instead. See Cluster health checks below for the full icon vocabulary and what the section deliberately cannot see.

• TRAEFIK WIRING — Traefik's wiring as configured: one branch per entrypoint, each with its routers, their middlewares, and the service they point at. The branches flow into as many columns as the terminal allows, in the order the Traefik service's own arguments declare them — the four every cluster has (dashboard, ping, default, https) before this cluster's per-vhost ones. Routers whose entrypoint does not exist get their own block below, at full width, since a tree keyed by entrypoint would otherwise drop them silently. See Traefik wiring below for what "as configured" means and for the optional (currently dormant) live cross-check against Traefik itself.

The panel itself opens no database or broker connection and holds no credentials. Its only privilege is the Docker socket: the Docker section reads the Swarm API, and the health section additionally executes read-only status commands inside the service containers (pg_autoctl show state, db.hello(), kafka-metadata-quorum.sh, a /health curl). GlusterFS is queried on the host via sudo -n and is skipped when that is unavailable.

Requirements

• Python 3.11+
• Linux (Debian/Ubuntu) in production; macOS supported for development.
• Optional: a running Docker daemon for the services panel.

Installation

pip install terminal-status-panel     # from PyPI, once published
# or, from a checkout:
pip install .

This installs five panel commands (status-full, status-server, status-docker, status-health, status-traefik) plus an install-panel helper to wire it into a login shell.

Commands (sections)

The dashboard is split into four independently runnable sections, each with its own entry point — plus the combined command:

Each section only collects the data it needs: status-docker never touches the system collectors, status-server never opens the Docker socket, and status-health never touches the system collectors either (though it does open the Docker socket, to exec into service containers) — so you can run just what a given host cares about. status-traefik also opens the Docker socket, to list Swarm services and configs and to read the service states its tree renders verdicts from (the DOCKER INFOS block itself stays unrendered), but runs no exec and reaches no network beyond Docker unless the optional [traefik] cross-check is configured (see Traefik wiring). The combined command also accepts --sections with any comma-separated subset to pick explicitly, e.g. --sections docker,traefik for the two Docker-facing blocks alone.

The wiring block is the same either way — one rendering, flowed into columns — so nothing is visible in status-traefik that a login does not also show.

Any of the five works in the profile.d snippet (see Running it at login) — e.g. call status-docker or status-health on Docker Swarm nodes, status-server on plain servers, and status-traefik wherever you want to check what Traefik is actually wired to serve.

Usage

status-full    [--sections server,docker,health,traefik] [--width N] [--no-color] [--config PATH]
status-server  [--width N] [--no-color] [--config PATH]
status-docker  [--width N] [--no-color] [--config PATH]
status-health  [--width N] [--no-color] [--config PATH]
status-traefik [--width N] [--no-color] [--config PATH]

The command always exits 0 so it can never break a login shell. If a collector fails (no Docker socket, non-Debian host, …) that section degrades to a placeholder instead of erroring.

Command-line options

Colours are always forced on (unless --no-color), because at MOTD generation time there is no TTY to auto-detect a colour terminal.

How the render width is chosen

The width is resolved in this order (first match wins):

1. --width N — an explicit flag always wins.
2. The current terminal width — used automatically when standard output is a real terminal (TTY), i.e. when you run the command interactively or from a shell-login hook. This is what gives you the full screen width.
3. width from the config (default 80) — the fallback when there is no TTY, e.g. when update-motd.d pre-generates the cached MOTD.

The panel is designed for wide terminals. Narrow widths still render but wrap.

Configuration

Zero configuration is required. Settings are read from /etc/terminal-status-panel/config.toml (override with --config PATH). A missing or unreadable file falls back to the built-in defaults — it never raises.

Configuration reference

Full example

# Fallback width for non-TTY (MOTD) rendering. Interactive logins auto-detect
# the real terminal width regardless of this value.
width = 200

[docker]
timeout = 1.5
description_label = "lmu.service.description"
infrastructure_stacks = ["postgresql", "kafka", "mongodb", "rustfs", "portainer", "traefik", "registry"]
infra_ui_services = ["kafbat-ui", "cloudbeaver", "mongo-express", "rustfs-console"]

[services]
critical = ["postgres", "kafka"]

[thresholds.memory]
warning = 75
critical = 90

[thresholds.swap]
warning = 1

[thresholds.filesystem]
warning = 80
critical = 90

[thresholds.load]
warning = 0.8   # per-CPU multiplier
critical = 1.0

[health]
budget = 5.0
enabled = ["postgres", "mongodb", "kafka", "glusterfs", "rustfs"]

[health.timeout]
postgres = 1.5
mongodb = 2.5
kafka = 4.0
glusterfs = 1.0
rustfs = 2.0
wireguard = 1.0
dns = 2.5

[[health.dns.expect]]
name = "login.lmu.de"
addresses = ["10.9.9.9"]

Cluster health checks

status-health (and the health block inside status-full) probes the clustered infrastructure services this node participates in, plus WireGuard peer reachability and DNS consistency. Every service probe runs a read-only status command inside a locally running container via the Docker API — GlusterFS is the one exception, queried on the host via sudo -n — so none of this needs database or broker credentials:

WireGuard peer reachability is read from sudo -n wg show all dump (handshake age per peer); when that is unavailable it falls back to a plain TCP probe of the Swarm port (2377) per peer, and the PEERS sub-header shows which method was used (wg, tcp, or mixed when peers disagree).

The five kinds share one listing of the local containers, fetched once per run without inspecting each container. Asking per probe cost roughly kinds × (1 + containers) Docker round trips at every login — around 205 on a host with 40 containers — and the per-container inspect could raise a 404 for a container that stopped mid-listing, which the panel would have shown as a failed check. Only RustFS needs a container's full attributes (for RUSTFS_VOLUMES), and it inspects only the one container it matched.

Measured on production nodes on 2026-07-31: on lmzvd06-ccc-01 (5-node Swarm), the whole section takes 3.25 s end to end, within the 5 s default budget, with individual probe costs of PostgreSQL pg_autoctl show state 0.13 s, Kafka kafka-metadata-quorum.sh 2.6 s (JVM startup, not optimisable), GlusterFS gluster … --xml 0.10 s, and RustFS /health ~0.2 s. The lrz_cc cluster that node belongs to runs no MongoDB, so that figure — db.hello() 0.95 s — was measured separately, on lmzvd06-internet-app-1.

How the timeouts are enforced

Every check is its own task: each enabled cluster kind, the peer check and the DNS check. They all start together and are waited for concurrently, each until the earlier of its own health.timeout.<name> and the shared health.budget. A check that misses its deadline is reported as … <name>: time budget exceeded for that check alone — the kinds beside it keep their results, so a hung RustFS can no longer hide a PostgreSQL quorum loss that was measured two seconds earlier.

The deadline is what the panel waits for; whether the check itself stops work at that moment depends on what it runs:

• GlusterFS and RustFS pass their value down to the child process they spawn (subprocess timeout, curl -m), so the work really stops. RustFS divides its value between its endpoints, so five endpoints behind a blackhole cost the RustFS timeout once, not five times. (Below ~0.1 s per endpoint — more than 20 endpoints at the default — the share stops shrinking and the task deadline takes over instead.)
• PostgreSQL, MongoDB and Kafka run through docker exec, and docker-py bounds an exec by the client's socket timeout rather than per call. Their timeout is therefore enforced as the task deadline: the panel stops waiting and reports the check as out of budget, while the exec itself finishes in a daemon thread whose result is discarded. So that the socket timeout never expires first — which is what made the default docker.timeout = 1.5 unable to accommodate the ~2.6 s Kafka probe at all — the health section's Docker client is built with a socket timeout no smaller than the largest enabled health.timeout.*. docker.timeout continues to bound the DOCKER INFOS section exactly as before.

An abandoned check keeps running in a daemon thread, and one that is inside a child process (sudo -n wg, sudo -n gluster) when the panel exits would leave that child orphaned. Such a thread is therefore given a short, bounded grace period (0.25 s) at exit to finish or to kill its own child — bounded because the delay would otherwise be paid by the login shell, and only ever paid when a check has already been abandoned.

The own-hostname lookup the DNS check needs (socket.getfqdn(), a forward plus a reverse lookup through NSS) happens inside the DNS task for the same reason: with a broken resolver it blocks for tens of seconds, and that is the very fault this section reports on. The Swarm node list the peer and DNS checks need is fetched inside the budget too, once, by whichever of the two gets there first — and only when the Docker section did not already collect it for free.

Exactly one thing leaves the process before the budget starts: constructing the Docker client, which negotiates the API version with the daemon. That request is bounded by docker.timeout (1.5 s by default), the knob documented for it; the larger health timeout is applied to the client afterwards, so it bounds only the requests made inside the budget.

Icon vocabulary

The section's core idea: it never claims to know something it did not measure.

… and ✗ mean different things and must not be conflated: a budget timeout says nothing about the service's health, only that the panel gave up waiting for it; a failed check (✗) is a statement about the service, or about the tool used to ask it.

The neutral dot (·) exists because MongoDB reports its replica-set members but not their state: db.hello() tells the panel who belongs to the set, but only the primary and the member it just ran the command against have known state — every other member is genuinely unmeasured, and rendering an unearned ✅ for it would be worse than saying nothing. Every other check in this section (PostgreSQL's pg_autoctl rows, Kafka's quorum voters, GlusterFS peers/bricks) reports ✅ or 💀 for each member it lists, never ·, because those commands do report per-member state. A service whose own quorum was never established shows no icon at all next to its name, just a dim "quorum not reported" note — so "not observable" (the dot) and "never asked" never look the same. That note appears whenever the panel has no basis for a quorum verdict:

• the probe errored before parsing anything;
• the command succeeded but its output was not recognisable (an empty pg_autoctl table, a Kafka status in an unexpected format after an upgrade, a GlusterFS answer with neither peers nor volumes) — an unrecognised answer is not a measurement, and rendering 💀 for one would raise a red alarm for a perfectly healthy cluster;
• gluster peer status reports zero other peers, i.e. a single-node volume, which peer status alone cannot establish a quorum for;
• RustFS's RUSTFS_VOLUMES could not be read, so the endpoint list is a guess — the line then also reads (endpoint list unknown) next to the live count, because "1/1 live" against a guessed endpoint says nothing about a five-node cluster.

All three blocks can additionally read not checked (…) instead of a false clean result: the CLUSTERS block shows not checked (no Docker client) when there is no Docker socket to probe from (or every cluster kind is disabled in config), the PEERS block shows not checked (no peer list available) when the check produced no result and there were no peer names to check in the first place — i.e. neither the wg/TCP probe answered nor a Swarm node list gave it anything to ask about — and the DNS block shows not checked (DNS check did not run) when the section has no collected data at all (the DNS check itself always runs, so within a real run this line cannot appear; it guards the case where the whole section is missing). All exist for the same reason — an empty list from a check that never ran would otherwise look identical to "checked, found nothing," which is a false clean bill of health. Those lines are also prefixed with the same neutral dot (·) as the MongoDB member case above: a block that never ran carries exactly that claim — not observed, nothing more said.

Where a probe deliberately narrows what it looks at, it says so in the same place: (+N more volumes) when a GlusterFS host serves more than the one volume reported, and (+N more containers) when a node runs more than one container of the same kind (a pg16 → pg18 migration, say) and only the first was probed.

A service with no running container

n/a here (this node legitimately runs no member of the service — no MongoDB on a node that only hosts PostgreSQL, say) is not the same as a service that should be running here but is not. When the Swarm service spec pins a service to this node's hostname (or the service runs in global mode) with at least one desired replica, but no matching container is currently running — most likely a crash loop — the panel reports ✗ <service>: no running container (the service title followed by the error) instead of n/a here.

This check is deliberately narrow: an unpinned replicated service (no node.hostname placement constraint) is never flagged this way, even while it is crash-looping, because it could legitimately be scheduled on a different node. The DOCKER INFOS block, which reads the live Swarm service list rather than the placement spec, still shows such a service correctly — this blind spot is specific to the health section's per-node view.

What the section cannot see

• MongoDB quorum means only "a primary exists". db.hello() reports membership and who the primary is, but not per-member replication state; that would need rs.status(), which needs credentials this panel deliberately does not hold.
• RustFS heal and erasure-coding state are invisible: /health is a liveness check only, and the admin API that reports heal/EC state answers 403 without credentials the panel does not have.
• An unpinned crash-looping service is not flagged (see above) — DOCKER INFOS still shows it, just not the health section.
• GlusterFS needs passwordless sudo -n gluster … on the host; without it (no sudo rule, no gluster binary), the block reports n/a here rather than an error — the tool being unreachable says nothing about the volume's actual health.

Traefik wiring

status-traefik (and the traefik section inside status-full) reads Traefik's entrypoint → router → middleware → service wiring straight from the Docker API: the entrypoints from the Traefik service's own command arguments, the routers/middlewares/services from every Swarm service's traefik.http.* labels, and the file-provider routers from the mounted Docker configs (traefik_dynamic*) — the api and ping-router entries live only there. No credentials beyond the Docker socket are needed, and no change to the Traefik deployment.

Only the config generations the Traefik service actually mounts are read. Swarm keeps every generation of a config — traefik_dynamic_yml_v1 through _v4 all exist on lrz_cc — but only the ones named in the service spec are the ones Traefik has loaded. Selecting by name instead showed ping-router four times on every entrypoint and turned entrypoints that were removed two revisions ago into orphaned-router findings. Where the Traefik service cannot be found at all, no generation is guessed: the file-provider routers are reported as missing, with the reason named, rather than shown as if they were current.

The panel renders one branch per entrypoint (sorted by port), each listing its routers (dimmed when they come from the file provider), their middlewares, and the Docker service each one points at — cross-checked against the same Swarm service data the DOCKER INFOS section uses, through the same service_verdict, so one service never gets two verdicts. That data is collected whenever the traefik section runs, including for a bare status-traefik; the DOCKER INFOS block itself is not rendered as a side effect. When the Docker daemon gives no answer at all — no client, or an unreachable or non-Swarm daemon — the service line shows a neutral · rather than claiming the service is missing, since nothing was measured. A router naming no entrypoint is attached to every entrypoint by Traefik itself, so it appears under all of them; an entrypoint with no attached router reads — no router, which is a finding (a published port nothing serves), not an absence.

Layout and order

The entrypoint branches flow into as many columns as the terminal allows — the same Columns arrangement CLUSTER HEALTH uses, three at 190 columns, one at 60. Stacked vertically they run to some seventy lines on lrz_cc while two thirds of the width stays empty. The orphaned-router block stays full width below them: its lines are the longest in the section, and it is what you read first. Each entrypoint's head line carries the worst verdict among its routers, so a wall of branches still says at a glance which one to open.

Entrypoints appear in the order the Traefik service's arguments declare them, not by port. The Ansible role lists the four every cluster has — dashboard, ping, default, https — before appending this cluster's per-vhost ones, and that grouping is more useful than the numeric order, which would put https (443) first and dashboard (8082) last and scatter the four.

Entrypoints that are supposed to look empty

--ping.entryPoint=ping makes Traefik answer /ping on that entrypoint itself, with no router involved. It is read from the same arguments, and that entrypoint reads — Traefik's own health check instead of — no router, so the one port that is meant to carry nothing does not read as a finding. Every other empty entrypoint still does — https :443 on lrz_cc genuinely has nothing behind it.

Services the file provider declares

A router can point at a service defined in the dynamic YAML rather than in Swarm — account-api → account-api-placeholder → http://user-account.internal is the live example. Those services are read along with the routers, and the upstream URL is shown in place of a Docker verdict, with a ·: nothing about that target was measured. Matching them against Swarm service names instead reported ✗ no such service for something that was never supposed to be a Swarm service.

What "as configured" means, and its limit

Everything above is read from configuration — labels and YAML — never from Traefik's own runtime state. A router with a typo'd rule, or naming an entrypoint that does not exist, still appears here exactly as declared, because nothing in this reading path asks Traefik whether it actually accepted it. The real case on this cluster: the image_api router's label names the entrypoint websecure (Traefik's own common naming convention for a TLS entrypoint), but this cluster's nine entrypoints are named dashboard, ping, default, https, login_lmu_de, portalmgmt, www_portal_uni_muenchen_de, db-ui and kafbat — no websecure among them, so the router is wired to a port that plainly doesn't exist. Since a tree keyed by entrypoint has no branch to put such a router under, it would otherwise vanish from the panel silently. Instead it gets its own ORPHANED ROUTERS block, listing the router, the entrypoint name(s) it refers to that do not exist, its rule, and the service it would have pointed at.

When the Docker configs backing the file provider could not be listed at all, a file provider unreadable: … warning appears above the tree — a partial-read failure, distinct from the routers simply being empty. Because api and ping-router live only in the file provider, this warning is the signal that their absence below is a read failure, not a finding.

The optional live cross-check

The [traefik] config section (url, cert, key, ca — see Configuration reference) is meant to close the "as configured" gap: given Traefik's /api/rawdata endpoint and a client certificate, the collector asks Traefik what it actually accepted and records the answer per router.

It is dormant on every app server today, and should stay unset. Reaching that endpoint needs a client certificate signed by the webfe CA, and the Ansible role that provisions app servers currently issues only app-server TinyCA certificates — for Traefik→service mTLS, a different trust chain than the one the dashboard's own listener expects. Configuring traefik.url without a certificate the dashboard accepts does not error: an unreachable or rejected connection is treated the same as "not configured" (see fetch_accepted in collectors/traefik.py) and the check is silently skipped, so no test will surface the mistake. Leave the section unset until the app servers have a certificate from the right CA.

When the cross-check does run, the tree shows its answer: a router Traefik reported as not enabled is marked 💀 rejected by Traefik on its own line — the configuration is there, Traefik declined it. The accepted case adds nothing: the tree already reads as configured-and-accepted, and a second checkmark on every line would only be noise.

Nothing is marked unless Traefik was actually asked and actually answered about that router. With [traefik] unset, unreachable, or answering in a shape the parser cannot read (a router whose entry carries no status at all), no marker appears — "we did not ask" and "Traefik said no" must never look alike.

Running it at login

Recommended: run it from profile.d (the login shell), not from update-motd.d. This is the setup we use in production, and the reasoning is explained below. Use one method only — running both prints the panel twice.

Why profile.d and not update-motd.d?

update-motd.d looks like the natural home for a login banner, but it cannot render at the viewer's terminal width:

• pam_motd runs the update-motd.d scripts during PAM session setup, before the login shell starts. At that moment the script has no controlling TTY and the terminal size is not available; COLUMNS/LINES are only set later, by the interactive shell.
• SSH does not change this. SSH knows the client's window size (from its pty-req), but it does not pass it to the MOTD scripts. So whether you connect by SSH or by a VM console, the result is the same.
• The output is also typically cached (/run/motd.dynamic) and shown to every subsequent login regardless of their window — a single fixed rendering.

The net effect: update-motd.d always renders at a fixed width (the config width, default 80). For our environment that is exactly wrong:

• We reach every server only over SSH — never a VM/VMware console — so a real terminal with a known size is always present at the shell, just not at MOTD-generation time.
• We work from MacBooks and 4K displays, where an 80-column banner is either cramped or wastes most of the screen. We want the panel to fill whatever window the login happens in.

A profile.d snippet runs inside the interactive login shell, where stdout is the SSH pty and its (SSH-negotiated) size is available. The tool then auto-detects and uses the full current terminal width on every login — wide on a 4K display, snug in a small MacBook window — with no fixed value to maintain. That flexibility is why we chose it.

Install with install-panel

The install-panel command writes the login snippet for you — system-wide or per-user — and is idempotent (safe to re-run) and reversible.

# System-wide, all users (writes /etc/profile.d/zz-terminal-status-panel.sh):
sudo install-panel --scope global

# Per user, no root needed (managed block in ~/.profile or ~/.zprofile):
install-panel --scope user

# Pick which panel(s) to show — e.g. Docker + cluster health on a Swarm node:
sudo install-panel --scope global --panel docker --panel health
# …or any other combination as separate commands:
install-panel --scope user --panel server --panel docker

# Preview without writing, then remove again:
install-panel --scope user --dry-run
install-panel --scope user --uninstall

A Swarm node is the natural case for --panel docker --panel health together: the Docker Swarm block and the clustered-services health block answer different questions (what's scheduled vs. what's actually healthy) and both only make sense where the Docker socket is available. Installed alone, --panel docker collects no health at all, so the Working cell of every clustered service falls back to Docker's own measurement — · only for a row Docker itself measured clean (fully staffed or scaled to zero), still 💀/⚠️ when Docker measured it dead or degraded — honest, but the column only earns its cluster icons with --panel health beside it.

Options:

Global vs. user gives you flexibility: roll it out for everyone via /etc/profile.d, or let individual users opt in (or override the global one) from their own profile. The snippet only runs for login shells (SSH logins, bash -l) and only when interactive — it renders once at login; resizing the window afterwards re-renders on the next login.

To avoid a duplicate static banner, make sure no update-motd.d hook is installed and, if present, empty /etc/motd (and optionally set PrintMotd no in /etc/ssh/sshd_config).

Fallback: update-motd.d (fixed width, not recommended here)

If you must use the classic MOTD mechanism, drop a one-line hook (exec status-full) into /etc/update-motd.d/ and set a fixed wide width in the config — accepting that it will not adapt to each login's window. For a mix of 4K and laptop screens that is the wrong trade-off; prefer install-panel.

Service descriptions (Docker Swarm)

Services are grouped by their com.docker.stack.namespace label (set automatically for stack deployments). To show a human-readable description per service, add a label to the service — by default the key lmu.service.description:

services:
  postgres:
    image: postgres:18
    deploy:
      labels:
        lmu.service.description: "PostgreSQL Datenbank, Version 18"

Change the read label key via docker.description_label in the config.

OS logos

Logos are pre-rendered from real PNGs into half-block ANSI (▀ with fore/background colours) and bundled under src/terminal_status_panel/render/logos/*.ans. They are plain ANSI, so they render in MOTD and over SSH without any image protocol or runtime dependency. The correct logo is chosen automatically from the detected distribution (Debian / Ubuntu / generic Linux).

To regenerate them (dev only, needs Pillow — pip install -e '.[dev]'), drop source PNGs into assets/logos/ and run:

python tools/generate_logos.py

Development

python -m venv .venv && . .venv/bin/activate
pip install -e '.[dev,test]'
ruff check src tests
python -m pytest

CI (.github/workflows/ci.yml) runs ruff and the test suite on every push and pull request across Python 3.11–3.13.

Publishing to PyPI

Releases are automated. Pushing a version tag vX.Y.Z triggers .github/workflows/release.yml, which builds the sdist + wheel and publishes to PyPI via Trusted Publishing (OIDC) — no API token is stored in the repo.

Release steps:

# 1. bump the version in pyproject.toml (must match the tag)
# 2. commit, then tag and push
git commit -am "release: v0.1.0"
git tag v0.1.0
git push && git push --tags

One-time setup (before the first release):

1. On https://pypi.org → Your projects → Publishing, add a pending trusted publisher with:
   • PyPI project name: terminal-status-panel
   • Owner: edutap-collective
   • Repository name: terminal_status_panel
   • Workflow name: release.yml
   • Environment name: pypi
2. In the GitHub repo → Settings → Environments, create an environment named pypi (optionally add required reviewers to gate publishes).

License

Licensed under the EUPL-1.2.