TeslaBLE - A C++ library for communicating with Tesla vehicles over BLE
This library is designed to communicate with Tesla vehicles locally via the BLE API. It follows the same principles as the official Tesla vehicle-command library (Golang), and is intended for use in embedded systems.
It exists to:
- Provide a local and offline alternative to the official Tesla API.
- Avoid the rate limits of the official Tesla API.
The main purpose of this library is to locally manage charging of the vehicle to enable use cases such as charging during off-peak hours, or to manage charging based on solar production. It is not intended to replace the official Tesla API for all use cases.
Usage
This project is intended to be used as a library in your own project. It is not a standalone application.
Hosts built on this library:
- yoziru/esphome-tesla-ble - ESPHome component (ESP32 talks to the car directly).
- yoziru/ha-tesla-ble - Home Assistant integration via the Python bindings, working over local adapters or ESPHome Bluetooth proxies.
Several examples are included for your convenience.
cd examples/simple/
cmake .
make
The host contract is small: implement BleAdapter (write frames) and
StorageAdapter (persist keys/sessions), construct the Vehicle after
storage is loaded, then call loop() periodically, feed notifications to
on_rx_data() and connection state to set_connected(). Successful actions
queue their own follow-up state polls; has_private_key() and
pending_command_count() cover pairing state and in-flight work.
Disconnect cancels unfinished commands, decoded replies, partial frames and
delayed refreshes; do not replay controls automatically on reconnection. Keep
vehicle credentials, pairing evidence and host-owned last-known telemetry.
BleAdapter::write() means queue acceptance, not delivery. A successful result
means the protocol completion condition was received, not that refreshed
telemetry proves the requested state. A lost reply can leave an unknown outcome
even after retries; retries reuse the encoded request within the same session.
Command names are diagnostic labels, not authentication or refresh policy.
set_seat_climate() sends one heat/cool request; the car handles exclusivity.
Off clears cooling when supported, then heating, with one completion callback.
Cooling support describes observed hardware, not current levels. Failure stops
later steps without rollback. Climate/preconditioning or Climate Keeper must be
on for seat commands; the library does not turn climate on implicitly. Optional UI exposure
and retention/freshness remain host-native, best effort rather than parity.
State callbacks are observations: absent optional fields are unknown, not zero, Off or proof that hardware was removed. The library does not merge telemetry. HA replaces each reported state group, keeps capability evidence separately and retains sleeping-car values while VCSEC remains reachable. ESPHome retains individual sensor values and uses last-known charging/sentry state for its native poll cadence; those retained values are not new observations or per-field freshness guarantees. Neither host should optimistically publish a commanded state as observed merely because the command completed.
Building and Testing
Quick Start
# Clone the repository
git clone https://github.com/yoziru/tesla-ble.git
cd tesla-ble
# Setup development environment (optional but recommended)
./scripts/setup_dev_environment.sh
# Build the project
cmake -B build
cmake --build build
# Run tests
./scripts/run_tests.sh
Manual Build
# Configure with CMake
cmake -B build -DCMAKE_BUILD_TYPE=Release
# Build the library and tests
cmake --build build --config Release
# Run tests with CTest
cd build
ctest --build-config Release --output-on-failure
Running Tests
Using the Test Runner Script
The repository includes a comprehensive test runner script with various options:
# Run tests in Debug mode (default)
./scripts/run_tests.sh
# Run tests in Release mode
./scripts/run_tests.sh --release
# Run tests with coverage analysis
./scripts/run_tests.sh --coverage
# Run tests with Valgrind (Linux only)
./scripts/run_tests.sh --valgrind
# Clean build and run tests
./scripts/run_tests.sh --clean
# Get help on available options
./scripts/run_tests.sh --help
Manual Test Execution
# Build and run all Tesla BLE tests (excludes dependency tests)
cd build
ctest --output-on-failure --verbose
# Run specific test suites
./tests/test_client
./tests/test_key_generation
./tests/test_message_building
./tests/test_message_parsing
./tests/test_session_management
./tests/test_protocol_compliance
./tests/test_error_handling
Test Coverage
To generate a coverage report:
# Install coverage tools (Ubuntu/Debian)
sudo apt-get install lcov
# Run tests with coverage
./scripts/run_tests.sh --coverage
# Coverage report will be generated in build/coverage_html/
Static Analysis
The project includes static analysis via cppcheck:
# Install cppcheck
sudo apt-get install cppcheck # Ubuntu/Debian
brew install cppcheck # macOS
# Run static analysis
cppcheck --enable=all --inconclusive \
--suppress=missingIncludeSystem \
--suppress=unusedFunction \
src/ include/ examples/
Code Formatting and Linting
The project uses clang-format for code formatting and clang-tidy for static analysis:
# Install clang tools
sudo apt-get install clang-format clang-tidy # Ubuntu/Debian
brew install clang-format clang-tidy # macOS
# Run formatting and linting checks (will configure CMake if needed)
./scripts/clang-format.sh --check
./scripts/clang-tidy.sh --check
# Or run individually:
# Format code
find src include tests examples -name "*.cpp" -o -name "*.h" | xargs clang-format -i
# Check formatting
find src include tests examples -name "*.cpp" -o -name "*.h" | xargs clang-format --dry-run --Werror --style=file
# Run clang-tidy on source files (requires compile_commands.json)
find src -name "*.cpp" | xargs clang-tidy
Development Environment Setup
Use the provided script to set up your development environment:
./scripts/setup_dev_environment.sh
This script will:
- Detect your operating system
- Install required dependencies (cmake, compiler, etc.)
- Install optional development tools (lcov, cppcheck, valgrind)
- Set up git hooks for automatic testing
Continuous Integration
The project uses GitHub Actions for CI/CD with the following features:
- C++ build, tests, examples and clang checks: Ubuntu
- Python bindings and sdist-to-wheel builds: CPython 3.13 and 3.14 on Ubuntu
- Release wheels and offline wheel tests: Linux x86_64/aarch64 and macOS arm64/x86_64
- Memory testing: Valgrind is available locally via
./scripts/run_tests.sh --valgrind(not run in CI) - Coverage: Coverage analysis is available locally via
./scripts/run_tests.sh --coverage(not run in CI)
Test Structure
The test suite is organized into several categories:
test_client.cpp: Core client functionality and initializationtest_key_generation.cpp: Private key generation and loadingtest_message_building.cpp: Message construction for various commandstest_message_parsing.cpp: Parsing of received messagestest_session_management.cpp: Session handling and peer managementtest_tb_utils.cpp: Utility functions and helper methodstest_vehicle.cpp: Vehicle state management and command processingtest_session_recovery.cpp: Session recovery after session errors
Each test file contains comprehensive unit tests covering both success and failure scenarios, edge cases, and parameter validation.
State Architecture
The library uses a unified state pattern for command processing with the following states:
IDLE: Initial state for new commandsAUTHENTICATING: Unified authentication initiation (replaces legacy domain-specific states)AUTH_RESPONSE_WAITING: Unified authentication response waitingREADY: Command ready to be sentWAITING_FOR_RESPONSE: Waiting for command responseCOMPLETED: Command completed successfullyFAILED: Command failed
This architecture provides a clean, maintainable approach to command lifecycle management with exponential backoff for retries.
Dependencies
- nanopb
- mbedtls 3.x
- NOTE: ESP-IDF <=4.4 includes mbedtls 2.x, and is not compatible with this library. You will need to use at least ESP-IDF 5.0.
Features
- Implements Tesla's BLE protocol
- AES-GCM key generation
- Metadata serialization
- Supports
UniversalMessage.RoutableMessageencoding and decoding- Supports Vehicle Security (VSSEC) payload
- Supports Infotainment payload
Credits
This fork builds on the original version by pmdroid.
IMPORTANT
Please take note that this library does not have official backing from Tesla, and its operational capabilities may be discontinued without prior notice. It's essential to recognize that this library retains private keys and other sensitive data on your device without encryption. I would like to stress that I assume no liability for any possible (although highly unlikely) harm that may befall your vehicle.
Metadata
Release files for tesla-ble 6.0.2
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| tesla_ble-6.0.2.tar.gz | 303.4 kB | With provenance | Details for tesla_ble-6.0.2.tar.gz |
Built distributions (wheels)
Total release size: 17.4 MB
Release files / tesla_ble-6.0.2.tar.gz
| Download URL | tesla_ble-6.0.2.tar.gz |
|---|---|
| Size | 303.4 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
3d7a11564bbe713e638ee47f950ac899c421026e2a86467e42f14e3408bb8021
|
|
BLAKE2b-256 checksum How to use checksums |
39f7aa4c0b504b51bb54f432d3bfa27cc5a9b55b6e0ac0b016792bdbdb9ebc35
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp315-cp315-musllinux_1_2_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp315-cp315-musllinux_1_2_x86_64.whl |
|---|---|
| Size | 1.7 MB |
| Tags | CPython 3.15 Linux musl 1.2+ x86-64 |
|
SHA-256 checksum How to use checksums |
6ea76619bb2153c3a24dffc68c0479e97ab5fb35989be32cac095798e549b6b7
|
|
BLAKE2b-256 checksum How to use checksums |
8a2081f9e56ddaab5cbbc80bab2255e64c9f4b0bc01e59db0b65e50ff1e02d6b
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp315-cp315-musllinux_1_2_aarch64.whl
| Download URL | tesla_ble-6.0.2-cp315-cp315-musllinux_1_2_aarch64.whl |
|---|---|
| Size | 1.6 MB |
| Tags | CPython 3.15 Linux musl 1.2+ ARM64 |
|
SHA-256 checksum How to use checksums |
5461fa36087d5f290fc2c74ef4b0236794f22a5dd2c51a0e05695328282ebfbf
|
|
BLAKE2b-256 checksum How to use checksums |
1112a7c1625d563bea3a66ce995d2e23154c007c1c3a7b39638bb0a5b21f3573
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp315-cp315-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp315-cp315-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl |
|---|---|
| Size | 644.2 kB |
| Tags | CPython 3.15 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64 |
|
SHA-256 checksum How to use checksums |
441a2cca7f2afd516bf1aea6215185dd7dcc0618c875eee52b88114cd6f6fb98
|
|
BLAKE2b-256 checksum How to use checksums |
ef22381df9ac803f8f67488cfb6c2117465b5b8c18a71815749edb33aadb87f1
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp315-cp315-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
| Download URL | tesla_ble-6.0.2-cp315-cp315-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl |
|---|---|
| Size | 603.3 kB |
| Tags | CPython 3.15 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64 |
|
SHA-256 checksum How to use checksums |
f82c77f7c92c69b3bb00faaba1c690732b47429b0bbbbdabf5454381a0e7403e
|
|
BLAKE2b-256 checksum How to use checksums |
d5c5d79bfd5577935792bed12cb0784da3d4db13772a36897fd1fc44542ed3a5
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp315-cp315-macosx_11_0_arm64.whl
| Download URL | tesla_ble-6.0.2-cp315-cp315-macosx_11_0_arm64.whl |
|---|---|
| Size | 547.3 kB |
| Tags | CPython 3.15 macOS 11.0+ ARM64 |
|
SHA-256 checksum How to use checksums |
97cdc1600ae1df1c8ab364af0a0e1948f68d884376853ebcfb7e69782e6a53ff
|
|
BLAKE2b-256 checksum How to use checksums |
c27fdf43ce8e928e536e542f483a878ee2ab643c48b5f1ae8ee701497e21fd09
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp315-cp315-macosx_10_15_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp315-cp315-macosx_10_15_x86_64.whl |
|---|---|
| Size | 584.2 kB |
| Tags | CPython 3.15 macOS 10.15+ x86-64 |
|
SHA-256 checksum How to use checksums |
c533d9af95db0d10eacf4738cadbe6cde14f02abb284e869f5dd5257f0d3381e
|
|
BLAKE2b-256 checksum How to use checksums |
d343d24adfb5ca978864d074205a78da50a0440a75526acfe79057a476f513c3
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp314-cp314-musllinux_1_2_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp314-cp314-musllinux_1_2_x86_64.whl |
|---|---|
| Size | 1.7 MB |
| Tags | CPython 3.14 Linux musl 1.2+ x86-64 |
|
SHA-256 checksum How to use checksums |
f8ea1ab720f324869b692dcbf2092711dfcb68ea4a3d682e728d1fc02fe8fc8a
|
|
BLAKE2b-256 checksum How to use checksums |
b31132d8b93c73c9152ad7d20216b4e84663ba20b8d4ea2e803ad00e3422dc7e
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp314-cp314-musllinux_1_2_aarch64.whl
| Download URL | tesla_ble-6.0.2-cp314-cp314-musllinux_1_2_aarch64.whl |
|---|---|
| Size | 1.6 MB |
| Tags | CPython 3.14 Linux musl 1.2+ ARM64 |
|
SHA-256 checksum How to use checksums |
a540d3e855b57871b2c5e8a98cd11aa4cd72d6b8fcb81972d3ef15253011c4b3
|
|
BLAKE2b-256 checksum How to use checksums |
b4cf99a3daa4013f79823f1613fe3415ce2ea5c1a0983d544997659cf6080cae
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp314-cp314-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp314-cp314-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl |
|---|---|
| Size | 644.2 kB |
| Tags | CPython 3.14 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64 |
|
SHA-256 checksum How to use checksums |
1a895dfc8ea89c5f056921a430d9f985e8c291de38e2d16ccbecff4a69429975
|
|
BLAKE2b-256 checksum How to use checksums |
f869c2fead2ef0b9e5a3c63e980a83ae56ffdd613d0e3ce8d66d0b4c6727b642
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp314-cp314-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
| Download URL | tesla_ble-6.0.2-cp314-cp314-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl |
|---|---|
| Size | 603.3 kB |
| Tags | CPython 3.14 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64 |
|
SHA-256 checksum How to use checksums |
32500c3ee8e18f950281e946bf2cd1c97a8dc1ad4b8c3cf3dbd1215db2eb6c36
|
|
BLAKE2b-256 checksum How to use checksums |
9d18b4398e554dd2fa5529374638ff325876876c82f022d12e8a9912a923c439
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp314-cp314-macosx_11_0_arm64.whl
| Download URL | tesla_ble-6.0.2-cp314-cp314-macosx_11_0_arm64.whl |
|---|---|
| Size | 547.3 kB |
| Tags | CPython 3.14 macOS 11.0+ ARM64 |
|
SHA-256 checksum How to use checksums |
4bedea9649bb6d50550d7f1468b16f878cd20d88aca3fc09558025dfb0c5b90a
|
|
BLAKE2b-256 checksum How to use checksums |
0ec09d62cc588bb9357e8bb773bb840a994827538d37e27d356d1917f8bd95e5
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp314-cp314-macosx_10_15_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp314-cp314-macosx_10_15_x86_64.whl |
|---|---|
| Size | 584.2 kB |
| Tags | CPython 3.14 macOS 10.15+ x86-64 |
|
SHA-256 checksum How to use checksums |
696f6a4b22e0bcbb907db64d341a7023613dcfc166e5fea6e1a1e0bd9a831c90
|
|
BLAKE2b-256 checksum How to use checksums |
be12a84e1f4f92f3f388a61a5cb21b93a00dd08b3d56d4cc347a5ea520542091
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp313-cp313-musllinux_1_2_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp313-cp313-musllinux_1_2_x86_64.whl |
|---|---|
| Size | 1.7 MB |
| Tags | CPython 3.13 Linux musl 1.2+ x86-64 |
|
SHA-256 checksum How to use checksums |
5609041c97a193a83e63aa3fed689da58f3a544c562e6c2283a99d95a13f783d
|
|
BLAKE2b-256 checksum How to use checksums |
b4ddba4aaea25779f60d355d6be1454e1abaf0a3ac90acd4d12943999bd0200b
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp313-cp313-musllinux_1_2_aarch64.whl
| Download URL | tesla_ble-6.0.2-cp313-cp313-musllinux_1_2_aarch64.whl |
|---|---|
| Size | 1.6 MB |
| Tags | CPython 3.13 Linux musl 1.2+ ARM64 |
|
SHA-256 checksum How to use checksums |
0df31c018cc5aa645db71506ff7b36fd667abe56e72928de7ea598f44399c346
|
|
BLAKE2b-256 checksum How to use checksums |
bfea0dea974527a3a60ba4361588c8c3ff2adad5d1865c3ace5fe09003d2bc2c
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp313-cp313-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp313-cp313-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl |
|---|---|
| Size | 644.1 kB |
| Tags | CPython 3.13 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64 |
|
SHA-256 checksum How to use checksums |
f3836959d7e94224584053ffe3ce74ac70ecb7be4d785c4d213c02b70c66df80
|
|
BLAKE2b-256 checksum How to use checksums |
d3cdaf18e288682f5a5c35d9321b9f533340e0548d26482363f70bfc610504fe
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp313-cp313-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
| Download URL | tesla_ble-6.0.2-cp313-cp313-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl |
|---|---|
| Size | 602.5 kB |
| Tags | CPython 3.13 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64 |
|
SHA-256 checksum How to use checksums |
3f05a3b6d83130ad92ca522b7a229a2bd2fa7232350fe81b11bd800d0e5fde06
|
|
BLAKE2b-256 checksum How to use checksums |
d9428a61c7f41136bd076a0e07302450b9722b6a0e4c9bc4969102bc7e3ded72
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp313-cp313-macosx_11_0_arm64.whl
| Download URL | tesla_ble-6.0.2-cp313-cp313-macosx_11_0_arm64.whl |
|---|---|
| Size | 546.5 kB |
| Tags | CPython 3.13 macOS 11.0+ ARM64 |
|
SHA-256 checksum How to use checksums |
a2b1203c07d5f7c1f8b52238a7bb450dd3da2c87ea6adb8df620b8149982fdcc
|
|
BLAKE2b-256 checksum How to use checksums |
991b9f13dd119306d586f4584f07da46ab23b01d3b511a9e4672c90ace83404c
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / tesla_ble-6.0.2-cp313-cp313-macosx_10_13_x86_64.whl
| Download URL | tesla_ble-6.0.2-cp313-cp313-macosx_10_13_x86_64.whl |
|---|---|
| Size | 583.6 kB |
| Tags | CPython 3.13 macOS 10.13+ x86-64 |
|
SHA-256 checksum How to use checksums |
8d5870383bb260bd1cd74c83e562ab754779f4587356636b952049583d8f9989
|
|
BLAKE2b-256 checksum How to use checksums |
1d8c18a3bfb64681fae6d9775f4fe51f4b21f377f0eb2cb51b660ed76cb3c0c5
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logSecurity for tesla-ble 6.0.2
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
Full provenance
All 19 files in this release have been uploaded with provenance metadata.
Attestation for tesla_ble-6.0.2.tar.gz
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logA note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.