SEAMM Thermochemistry Plug-in
A SEAMM plug-in for Thermochemistry
Free software: BSD-3-Clause
Documentation: https://molssi-seamm.github.io/thermochemistry_step/index.html
Features
Please edit this section!
Acknowledgements
This package was created with the molssi-seamm/cookiecutter-seamm-plugin tool, which is based on the excellent Cookiecutter.
Developed by the Molecular Sciences Software Institute (MolSSI), which receives funding from the National Science Foundation under award CHE-2136142.
History
- 2026.10.28.8 – Bugfix: parallel ORCA as the MDI engine could not find OpenMPI
The engine’s own ORCA runs did not get the OpenMPI runtime the ORCA step gives its runs (library-path in orca.ini, its mpirun first on the PATH, the shared-memory transport), so a parallel engine died in start-up (“cannot open libmpi.so.40”). The step now sets that environment, from the program’s step, while the engine lives, with MPI core binding off, and restores it afterwards.
- 2026.10.28.7 – Bugfix: the MDI engine ran on one core
The warm MDI engine (ORCA) was launched with one core whatever the job had. It now gets the job’s allocation under Slurm (else the CPUs this process may use), capped by the job’s ncores option when that is a number, and the step says how many. The engine’s MPI runs are told not to pin their ranks to cores (OMPI_MCA_hwloc_base_binding_policy=none), as the ORCA step does.
- 2026.10.28.6 – CBH species start from their lowest conformer
Each fragment built from its SMILES now starts from the lowest MMFF94 conformer of several RDKit embeddings (“Fragments start from”, 20 embeddings by default), and the target can be rebuilt the same way (“Target starts from”), as CBH-ANL starts every species from its lowest rotamer: a single embedding of pentane to octane is gauche, and an optimization stays in that basin. The chosen chain dihedrals are printed. Requires seamm-thermochemistry 2026.10.28.4.
- 2026.10.28.5 – Bugfix: the CBH species were not optimized when the model prefers tasks
For a model chemistry with an analytic gradient but no analytic Hessian whose program prefers separate tasks (ORCA with a double hybrid, for one) the step took the tasks route, so the CBH species were never optimized and no settings fingerprints were stored. A new parameter, “Energies and Hessian via”, chooses the route: automatic (as before), the warm MDI engine, or separate tasks. The CBH approach now drives the engine by default, so every species is optimized over it and the Hessian is finite differences over the same connection; it falls back to tasks, with a note, only when the program has no engine or is not installed where the job runs.
- 2026.10.28.4 – Settings fingerprints of the CBH species from the engine
After each CBH species the step asks the MDI engine for the settings fingerprints of its calculations (seamm-mdi 2026.10.28; ORCA’s engine first) and stores them with the species’ energies as the properties settings fingerprint, element fingerprints and calculation, and the frequency ... three for the Hessian (the analytic-Hessian record, or the energy record for finite differences), so that seamm-thermochemistry-fragments harvest files them as verified records and the fragment store is searched by fingerprint. Engines that give no fingerprints leave the records unverified, as before.
- 2026.10.28.3 – CBH: radicals and ions, the fragment store, laddered reference values
Radicals and ions in the CBH approach: every fragment keeps the spin or charge of its atoms, the ATcT entry is selected with the same charge and multiplicity, and each species runs through the engine with its own charge and multiplicity. The target’s SMILES is checked against the system’s charge and spin multiplicity before the reactions are built (needs molsystem 2026.10.28 for radicals).
“Fragment store”: species already in the fragment-energy store at this model chemistry (seamm-thermochemistry-fragments harvest promotes them from finished jobs) are used instead of being computed, and serve as the fallback in “existing results” mode; the species table says where each value came from.
“Reference values”: ATcT for every reference species, a laddered reference set built with seamm-thermochemistry-ladder (CBH-ANL), or ATcT below an uncertainty threshold and the ladder otherwise. With a ladder the uncertainty is the ATcT part through the ladder’s coefficients on the anchors plus the ladder’s measured method term, both reported.
Bugfix: the “existing results” mode could not read the stored energies (the property values came back as dicts).
Requires seamm-thermochemistry 2026.10.28.3.
- 2026.10.28.2 – Enthalpies of formation by the isodesmic (CBH) approach with ATcT
A second approach, “Isodesmic (CBH) with ATcT references”, gives the enthalpy of formation of a molecule at 0 K and 298.15 K from the connectivity-based hierarchy (CBH) of error-cancelling reactions, with the reference species taken from the Active Thermochemical Tables (ATcT) and the 95 % uncertainty of the ATcT part, using the ATcT covariances when cached. The target and every reference species are optimized with the engine and their harmonic thermochemistry calculated over the same warm connection; alternatively the energies are read from properties already stored on the systems CBH:<SMILES>. For MOPAC and other NDDO methods, whose energy is already an enthalpy of formation, “Thermal corrections: none” skips the Hessians.
Every usable rung goes into the table CBH; the stored results are those of the highest usable rung, with the difference from ATcT when the target is in the tables. The dialog shows only the settings that apply to the chosen approach and mode.
Requires seamm-thermochemistry 2026.10.28.2 and RDKit, and a cached ATcT version (seamm-thermochemistry-atct download); ATcT data are never distributed with SEAMM.
- 2026.10.28.1 – The energies and Hessian come from the Model Chemistry
The step now takes its energies and gradients from the flowchart’s Model Chemistry by default, driving the program as a warm engine over MDI instead of running a subflowchart once per displaced structure (a program start-up each time). When the program provides an analytic Hessian (ORCA for HF and most DFT functionals) it is used directly; otherwise the Hessian is finite differences of the gradients over the same connection, or as separate tasks where the job runs its tasks. The route is discovered at run time; there is nothing to set.
The subflowchart remains available (“Energies and gradients from: subflowchart”) for calculations an MDI engine cannot do, and a flowchart from before this change, with a subflowchart and no Model Chemistry, still runs as it did. The dialog shows the Flowchart tab and the subdirectory handling only for the subflowchart, and reminds you to add a Model Chemistry step otherwise.
The properties are named with the Model Chemistry’s level, e.g. H#Thermochemistry#ORCA:QC@HF/bse:def2-SVP.
Checked: water with MOPAC PM6-ORG gives the same thermochemistry both ways (ZPE 49.76 vs 49.75 kJ/mol, H-E 59.680 vs 59.675 kJ/mol at 298.15 K), and ORCA HF/def2-SVP gives the same from its analytic Hessian and from finite differences (ZPE 60.67 kJ/mol both ways).
- 2026.10.28 – Bugfix: default parameters crashed, ZPE counted twice, results not stored
The default symmetry number, “from system”, stopped the step with NotImplementedError. The rotational symmetry number is now perceived from the structure by testing rotation axes against the geometry (C60 gives 60, SF6 24, methane 12, benzene 12, water 2, a linear centrosymmetric molecule 2), and the step reports the number and the axes it found. Optimized geometries are symmetric to well within the 0.1 Å tolerance used.
The enthalpy and Gibbs energy corrections added the ZPE a second time, and in mixed units: ASE’s H and G already include the ZPE, and the step added the ZPE in kJ/mol to values in kcal/mol. The ZPE also included the nominally zero translations and rotations. The thermal corrections U-E, H-E and G-E (each including the ZPE) and S are now in kJ/mol and J/mol/K, as the metadata says, and the ZPE comes from the true vibrations only. Water with PM6-ORG gives H-E-ZPE = 9.92 kJ/mol at 298.15 K, i.e. 4RT, and S = 188.2 J/mol/K.
The results advertised as total energy, H(0 K), U, H, S and G were never set, so they could be picked in the results tab but nothing was stored. The step now keeps the energy of the undisplaced structure from the subflowchart and stores all of them; U, H, S and G are lists over the pressures and temperatures, like the thermal corrections, and are named with the engine’s model chemistry, e.g. H#Thermochemistry#PM6-ORG.
A single atom and a single temperature or pressure crashed; both work now.
The number of frequencies to print was compared against the wrong list.
CI now installs the package with uv from its declared dependencies; the conda test environment file is gone.
2026.3.1 – Internal: switching from deprecated library pkg_resources to importlib
- 2025.1.31: Add properties and other results.
Added ZPE, H, G, S, P, T, number of saddle point modes, and the transition states frequency (for transition states) to the results.
2024.12.22: First real release.
2024.10.17 (2024-10-17)
Plug-in created using the SEAMM plug-in cookiecutter.
Metadata
Release files for thermochemistry-step 2026.10.28.8
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| thermochemistry_step-2026.10.28.8.tar.gz | 354.8 kB | Without provenance | Details for thermochemistry_step-2026.10.28.8.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| thermochemistry_step-2026.10.28.8-py2.py3-none-any.whl | Python 3, Python 2 | none | any | Details for thermochemistry_step-2026.10.28.8-py2.py3-none-any.whl |
Total release size: 406.8 kB
Release files / thermochemistry_step-2026.10.28.8.tar.gz
| Download URL | thermochemistry_step-2026.10.28.8.tar.gz |
|---|---|
| Size | 354.8 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
cd83e70e52f33cabb7e8140defaf3e72f62c704d1ad13076c9a7d13771cb1bf9
|
|
BLAKE2b-256 checksum How to use checksums |
6faeba2d8d7c3e8a3be712d4831f1282fac96a337cc17e591662e4386f865b0d
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Release files / thermochemistry_step-2026.10.28.8-py2.py3-none-any.whl
| Download URL | thermochemistry_step-2026.10.28.8-py2.py3-none-any.whl |
|---|---|
| Size | 52.0 kB |
| Tags | Python 2 Python 3 |
|
SHA-256 checksum How to use checksums |
517f1e4b3cf98d7a362e31c5839002fa09f613ad334551997a9e690d06db7e72
|
|
BLAKE2b-256 checksum How to use checksums |
cb583a1c6d0500c7372e6d00cf99c99034c8ff156822304056cd37428e1d3d7d
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/7.0.0 CPython/3.13.16
|
Security for thermochemistry-step 2026.10.28.8
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
No provenance found
None of the files in this release were uploaded with provenance metadata.
A note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.