thermohl 1.3.2rc0

Calculations relative to temperature and ampacity in overhead conductors.

ThermOHL

Thermohl is a python package allowing the computation of the temperature in overhead conductors for given transit intensity and environment parameters, or to compute the maximum possible transit intensity given a maximum temperature and environment parameters. A collection of models based on the Energy Balance Principle are available.

Main features

Three different solvers are available in the package:

• computation of the steady-state temperature;
• computation of the transient temperature;
• computation of the maximum possible steady-state transit intensity.

All solvers are based on the Energy Balance Principle, where the various power terms are calculated from one of four available models: a CIGRE and an IEEE model as well as two RTE-specific models, OLLA (R&D) and RTE.

Both steady-state solvers can be used for probabilistic simulations with random input parameters using the Monte Carlo method. Uncertainty quantification can be performed through statistics on the random simulation outputs, as well as through a sensitivity analysis using Sobol indices which allows ranking random input parameters according to their contribution to the total variance of the output.

Installation

Using pip

To install the package using pip, execute the following command:

    python -m pip install thermohl@git+https://github.com/phlowers/thermohl

Development

Install the development dependencies and program scripts via

  pip install -e .[dev]

Build a new wheel via

  python -m build --wheel

This build a wheel in newly-created dist/ directory

Building the documentation with mkdocs

First, make sure you have mkdocs and the Readthedocs theme installed.

If you use pip, open a terminal and enter the following commands:

  pip install -e .[docs]

Then, in the same terminal, build the doc with:

• mkdocs serve - Start the live-reloading docs server.
• mkdocs build - Build the documentation site.
• mkdocs -h - Print help message and exit.

The documentation can then be accessed locally from http://127.0.0.1:8000.

Simple usage

Solvers in thermOHL take a dictionary as an argument, where all keys are strings and all values are either integers, floats or 1D numpy.ndarray of integers or floats. It is important to note that all arrays should have the same size. Missing or None values in the input dictionary are replaced with a default value, available using solver.default_values(), which are read from thermohl/default_values.yaml.

Example 1

This example uses the IEEE model with default values to compute the surface temperature (°C) of a conductor in steady regime along with the corresponding power terms (W.m^-1) in the Energy Balance Principle.

from thermohl import solver

slvr = solver.ieee({})
temp = slvr.steady_temperature() 

Results from the solver are returned in a pandas.DataFrame:

>>> print(temp)
     T_surf   P_joule  P_solar  P_convection  P_radiation  P_precipitation
0  27.22858  0.273048  9.64051        6.5819     3.331658              0.0

Example 2

This example uses the IEEE model to compute the maximum current intensity (A) that can be used in a conductor without exceeding a specified maximal temperature (°C), along with the corresponding power terms (W.m^-1) in the Energy Balance Principle. Three ambient temperatures are specified as inputs, meaning that three corresponding maximal intensities will be returned by the solver.

import numpy as np
from thermohl import solver

slvr = solver.ieee(dict(Ta=np.array([0., 15., 30.])))
Tmax = 80.
imax = slvr.steady_intensity(Tmax)

>>> print(imax)
         I_max    P_joule  P_solar  P_convection  P_radiation  P_precipitation
0  1606.946066  83.794845  9.64051     66.750785    26.684570              0.0
1  1408.560563  64.382191  9.64051     50.884473    23.138228              0.0
2  1185.256686  45.586844  9.64051     36.234737    18.992617              0.0