tmux-orche 0.4.51

Typer-based CLI for tmux-backed Codex orchestration sessions

中文 · Install Guide

tmux-orche

Control plane for tmux-backed agent orchestration.

tmux-orche exists for one job: let agents call other agents as durable subagents, with explicit routing, recoverable terminal state, and human takeover when needed.

It is not just a wrapper around tmux panes. It gives your agent graph stable session names, control-loop routing, and a way to inspect or attach to the exact live terminal that is doing the work.

Installation

Full install guide: https://github.com/parkgogogo/tmux-orche/raw/main/install.md

Install the latest prebuilt binary without Python:

curl -fsSL https://github.com/parkgogogo/tmux-orche/raw/main/install.sh | sh

Supported prebuilt targets: darwin-arm64, darwin-x64, linux-x64.

Update a binary install in place:

orche update

Install from PyPI:

pip install tmux-orche

Install with uv:

uv tool install tmux-orche

Install from source:

git clone https://github.com/parkgogogo/orche
cd orche
python3 -m venv .venv
source .venv/bin/activate
pip install -U pip
pip install .

Why It Exists

If one agent is going to supervise another, you need more than "run a command in some pane".

You need:

• a stable session name for each worker
• an explicit route for results to come back
• terminal state that survives beyond one prompt
• a way to inspect progress without stealing the TTY
• a way to take over the live terminal when automation is not enough

That is the gap orche fills.

Control Loops

orche is most useful when you want a real loop to close, not just a one-shot command to finish.

OpenClaw -> Codex or Claude -> Discord

Use discord:<channel-id> when OpenClaw is supervising the worker and the loop should close back into Discord/OpenClaw.

This is the "external supervisor" path:

• OpenClaw opens or reuses a worker session
• the worker runs in tmux with durable state
• completion or needs-input events route back through Discord notify
• OpenClaw can decide what to do next

Codex reviewer -> worker -> tmux bridge

Use tmux:<session> when another agent session is the supervisor.

This is the "in-terminal reviewer" path:

• a reviewer session delegates work to a worker session
• the worker reports back to the reviewer through tmux bridge
• the reviewer can inspect, continue delegation, or escalate to a human

That is the core model: orche is the control plane that lets one agent session address another agent session reliably.

Why Named Sessions Matter

Raw tmux panes are not a control plane.

With orche, you work with repo-reviewer, repo-worker, or auth-fixer, not %17.

That difference matters because a named session can carry:

• a working directory
• an agent type
• a persistent tmux pane
• an explicit notify route
• later inspection and human takeover

Core Workflow

The normal loop is:

1. open
2. prompt
3. leave
4. status or read later
5. attach if a human needs to take over

Quick Start

Fast native attach shortcuts

Open a new native session in the current directory and attach immediately:

orche codex --model gpt-5.4
orche claude -- --print --help

These shortcuts:

• always use the current directory as cwd
• forward trailing args to the underlying agent CLI
• create a fresh session name like <repo>-<agent>-<random>

Reviewer-worker loop via tmux bridge

Open a reviewer that receives worker results:

orche open --cwd /repo --agent codex --name repo-reviewer

Open a worker that reports back to the reviewer:

orche open \
  --cwd /repo \
  --agent codex \
  --name repo-worker \
  --notify tmux:repo-reviewer

Send work to the worker:

orche prompt repo-worker "implement the parser refactor"

Check the reviewer later:

orche read repo-reviewer --lines 120
orche status repo-worker

Take over the worker if needed:

orche attach repo-worker

OpenClaw loop via Discord

Open a worker that reports back through Discord:

orche open \
  --cwd /repo \
  --agent codex \
  --name repo-worker \
  --notify discord:123456789012345678

Send work:

orche prompt repo-worker "analyze the failing tests and propose a fix"

Inspect later or attach directly:

orche status repo-worker
orche read repo-worker --lines 120
orche attach repo-worker

Best Fit Scenarios

tmux-orche is a good fit when you want:

• one reviewer session coordinating multiple workers
• OpenClaw supervising Codex or Claude through Discord notify
• durable worker sessions that accept multiple follow-up prompts
• explicit session-to-session routing inside tmux
• a live terminal takeover path when the loop gets stuck

It is less useful when you only need one short-lived command and do not plan to revisit the session.

Testing

The repo keeps normal unit/integration tests separate from real end-to-end tests.

Real E2E means:

• real orche CLI
• real tmux
• real codex
• real session-to-session prompt and notify flow

The real E2E suites are:

• tests/test_notify_e2e.py
• tests/test_session_collaboration_e2e.py

They are opt-in and require a working local environment:

ORCHE_RUN_E2E=1 python3 -m pytest -q tests/test_notify_e2e.py tests/test_session_collaboration_e2e.py

If tmux or codex is missing, or Codex is not logged in, those suites skip instead of simulating success.

Managed vs Native Sessions

Managed session

Use managed mode for normal orchestration:

orche open --cwd /repo --agent codex --name repo-worker --notify tmux:repo-reviewer

This is the default recommendation because orche can manage session metadata and routing coherently.

Native session

Use native mode when you need raw agent CLI args:

orche open --cwd /repo --agent claude -- --print --help

Rules:

• raw agent args must come after --
• native sessions do not use --notify
• do not mix raw agent args with managed notify routing

Command Model

• orche open Create or reuse a named control endpoint.
• orche codex / orche claude Open a fresh native session for the current directory and attach immediately.
• orche prompt Delegate work into an existing session.
• orche status Check whether the pane and agent are alive, and whether a turn is pending.
• orche read Inspect recent terminal output without taking over the TTY.
• orche attach Attach your terminal to the live tmux session.
• orche input Type text without pressing Enter.
• orche key Send special keys such as Enter, Escape, or C-c.
• orche list List locally known sessions.
• orche cancel Interrupt the current turn but keep the session alive.
• orche close End the session and clean up state.
• orche whoami Print the current session id.
• orche config Read or update shared runtime config.

CLI Entry Shortcuts

Use the short flags on CLI entry surfaces:

orche -h
orche -v
orche config -h

Notes:

• -h is supported on the root command and command groups
• -v is supported on the root command only
• leaf commands still use --help, for example orche attach --help

Notify and Routing

Notify is how control loops close.

orche open --notify accepts:

• tmux:<target-session>
• discord:<channel-id>

Use tmux:<session> when another agent session should receive the result:

orche open --cwd /repo --agent codex --name repo-worker --notify tmux:repo-reviewer

Use discord:<channel-id> when the supervisor is OpenClaw or another Discord-facing control loop:

orche open --cwd /repo --agent codex --name repo-worker --notify discord:123456789012345678

Notes:

• routing is explicit; there is no implicit global default
• changing the notify target means opening a new session
• tmux routing is for agent-to-agent loops
• discord routing is for OpenClaw or external supervision loops

Config

orche config list
orche config get claude.command
orche config get claude.home-path
orche config set claude.command /opt/tools/claude-wrapper
orche config set claude.home-path ~/custom/.claude
orche config set claude.config-path ~/custom/claude.json
orche config set discord.bot-token "$BOT_TOKEN"
orche config set discord.mention-user-id 123456789012345678
orche config set notify.enabled true

orche config get/set/list reads and writes the same JSON config file. You can update values through the CLI or edit the file directly.

Config file:

~/.config/orche/config.json

If XDG_CONFIG_HOME is set, orche uses:

$XDG_CONFIG_HOME/orche/config.json

State directory:

~/.local/share/orche/

If XDG_DATA_HOME is set, orche uses:

$XDG_DATA_HOME/orche/

Supported user config keys:

• claude.command Override the Claude CLI command that orche launches. Default is claude.
• claude.home-path Override the Claude source home directory mirrored into managed runtimes. Default is ~/.claude.
• claude.config-path Override the Claude source config path used for trust sync. Default is ~/.claude.json.
• discord.bot-token Set the Discord bot token used for bot-token delivery.
• discord.mention-user-id Set the Discord user id to mention in delivered notifications.
• discord.webhook-url Set the Discord webhook URL used for webhook delivery.
• notify.enabled Enable or disable notify delivery globally.

Notes:

• config.json may also contain session or runtime fields written by orche itself.
• Those internal fields are not part of the stable hand-edited config surface.
• Prefer the keys above for user-managed configuration.

Claude custom config

Use these when your Claude installation is wrapped or its source home/config is not in the default location.

Set a custom Claude executable:

orche config set claude.command /opt/tools/claude-wrapper

Set a custom Claude source home path:

orche config set claude.home-path ~/custom/.claude

Set a custom Claude source config path for trust sync:

orche config set claude.config-path ~/custom/claude.json

What each key changes:

• claude.command changes the binary or wrapper command that orche executes when it launches Claude.
• claude.home-path changes which Claude home directory orche mirrors into managed Claude runtimes.
• claude.config-path changes which Claude config file orche reads when it syncs trust settings into a managed worker runtime.

Typical cases:

• your system command is not literally named claude
• you use a wrapper script such as /opt/tools/claude-wrapper
• your Claude home directory is not ~/.claude
• your Claude config lives somewhere other than ~/.claude.json

Example config.json:

{
  "claude_command": "/opt/tools/claude-wrapper",
  "claude_home_path": "/Users/you/custom/.claude",
  "claude_config_path": "/Users/you/custom/claude.json"
}

Notes:

• claude.home-path and claude.config-path affect the source Claude state that orche mirrors into managed Claude sessions.
• after changing any of these keys, new Claude sessions use the updated value immediately.
• managed Codex runtimes keep using an isolated CODEX_HOME; orche also writes check_for_update_on_startup = false and [notice].hide_rate_limit_model_nudge = true there to avoid startup update checks and model-switch nudges interfering with managed sessions.

Prerequisites

• tmux
• codex CLI and/or claude CLI
• Python 3.9+

License

MIT