TokenPak — Local LLM proxy — guided setup
The open logistics layer for AI context.
TokenPak runs as a local LLM proxy with request records and explicit context tools. The default proxy preserves conversation turns; a forwarded request can correctly report zero tokens saved. Explicit compression operations can reduce eligible content. Provider-bound requests still go to your chosen provider, with no TokenPak cloud relay.
First measured request receipt in three commands
Prerequisites: Python 3.10+ and an already authenticated supported client. The reference path below uses Codex and reuses its existing OAuth login and normal default model. An API key or explicit model override is optional, not required. Run it from a real project; provider usage may count against your subscription or incur provider charges.
python -m pip install tokenpak
tokenpak serve --profile aggressive --stats-footer # terminal 1; leave running
tokenpak codex # terminal 2; use your existing login and selected/default model
In Codex, make a normal context-bearing request. The proxy prints a measured
receipt in terminal 1. In this unmodified reference setup, the built-in Pak
builder leaves every system, user, and assistant conversation turn intact, so
the receipt truthfully reports 0 tokens saved. This verifies routing and
accounting without claiming savings that did not occur. The session-only
footer is off by default and does not alter the provider response.
See the first receipt guide for prerequisites, the expected zero-savings output, the five-minute reference target, and the separate explicit compression surfaces.
Offline fixture demo
To inspect compression without credentials or provider spend:
tokenpak demo
┌──────────────────────────────────────────────────────┐
│ TokenPak — Offline Fixture Demo │
├──────────────────────────────────────────────────────┤
│ Scenario DevOps agent (config + logs) │
│ Data source built-in sample fixture │
│ Savings drivers dedup + alias │
├──────────────────────────────────────────────────────┤
│ Original 747 tokens │
│ Compressed 502 tokens │
│ Fixture delta 245 tokens (32.8%) │
│ Fixture cost delta $0.00073 per fixture │
│ Receipt status not a savings receipt │
├──────────────────────────────────────────────────────┤
│ Stages: dedup, alias, segmentize, directives │
└──────────────────────────────────────────────────────┘
This is an illustrative fixture, not a measured first-request receipt. Token counts vary by route and workload. Measure your own with
tokenpak savings; inspect provider-cache vs. TokenPak attribution withtokenpak status --tip-cache.
Works with
- Tested SDK adapters: OpenAI SDK, Anthropic SDK and LiteLLM.
- First-class integrations: Claude Code and Codex.
- Compatibility targets, not yet independently verified: Cursor, Cline, Continue.dev and Aider.
Run tokenpak integrate to see the full client list with setup guides for each.
Install
uv tool install tokenpak # or: pipx install tokenpak
Either one installs the tokenpak command into its own isolated environment.
To use TokenPak as a library inside a project, pip install tokenpak into an
activated virtual environment instead.
See docs/install-guide.md for per-installer detail,
optional extras, and the externally-managed-environment (PEP 668) error.
See docs/quickstart.md for per-client configuration.
Requirements: Python 3.10+.
Exposing the proxy beyond 127.0.0.1? Set TOKENPAK_PROXY_AUTH_TOKEN to a
shared secret to require Authorization: Bearer <token> on remote requests
(see docs/configuration/proxy-auth.md).
Runnable examples
The PyPI wheel keeps the install slim and does not bundle the repository's top-level examples. To run them after a normal package install, clone or download the source tree for the example files:
git clone https://github.com/tokenpak/tokenpak.git
cd tokenpak
python -m venv .venv
source .venv/bin/activate
python -m pip install -U tokenpak
python examples/basic_compression.py
examples/basic_compression.py is local-first and does not require provider
credentials. See examples/README.md for the full examples
index and developer editable-install path.
What's included (Free)
Dispatch (v0.1-alpha preview): a scoped, resumable, reviewable workflow-control surface. Released packages include the CLI and runtime modules; runtime commands require the optional
[dispatch]dependencies. Live station execution and delivery receipts are not wired yet. See the Dispatch guide.
- Context tools and truthful receipts — explicit compression operations can
reduce eligible content. The built-in Pak builder preserves role-bearing
conversation turns; byte-preserved routes report zero product-attributed
reduction. Inspect recorded usage with
tokenpak savingsand cache attribution withtokenpak status --tip-cache.make benchmark-headlineexercises a fixed fixture; its result is not a default-proxy savings receipt. - Client integration — setup guides and helpers for the compatibility tiers above
- Routing policy — configuration and observe-mode records; automatic model changes and fallback enforcement are not active by default
- Cost tracking — per model, per session, per agent; local SQLite, zero cloud
- TIP Spend Guard — pre-send circuit breaker; blocks runaway requests before provider call. Yes/No release or
[TIP: allow=once max=$X]directive. Catches both single-request spikes and the death-by-1000-cuts pattern via session-cumulative tracking. See docs/spend-guard.md. - Vault indexing + semantic search — index your codebase; search without an LLM call
- MultiPak Pro Phase 1 OSS surface — read-only Vault Pak adapter, companion journal promotion-candidate marking,
tokenpak pakCLI,/pak/v1/*proxy stubs. Full MultiPak (capture pipeline, recall ranking, Handoff Paks, anchor hydration) requirestokenpak-paid(Pro). See docs/multipak.md. - CLI + proxy server —
tokenpak serve,tokenpak cost,tokenpak savings - Value proof —
tokenpak prove runbenchmarks direct API vs. TokenPak on your own prompt workload and prints a side-by-side cost/token report. See the value proof guide. - A/B testing and replay/debug — compare compression configs, replay past requests
- 50 built-in compression recipes — YAML, customizable
Provider cache reuse is distinct from TokenPak context reduction. A provider cache hit does not mean the proxy omitted that context from the request. See docs/quickstart.md and docs/api-tpk-v1.md to get started.
Open source & editions
TokenPak's core is Apache-2.0 open source. TokenPak Pro is the proprietary
tokenpak-paid package, distributed separately with license requirements.
Hosted services remain deferred.
Support
- Docs: docs/quickstart.md · API reference · examples/README.md
- Issues: github.com/tokenpak/tokenpak/issues
- Discussions: github.com/tokenpak/tokenpak/discussions
- Email: hello@tokenpak.ai
License
The TokenPak open-source core is licensed under the Apache License 2.0 — see LICENSE. TokenPak Pro is proprietary; hosted services remain deferred.
Trademark
"TokenPak", the TokenPak name, logo, and brand assets are trademarks of TokenPak and are not licensed under Apache-2.0 (Apache-2.0 §6 grants no trademark rights). Nominative and reference use — for example "works with TokenPak" or "a plugin for TokenPak" — is fine. Using the name or logo in a way that implies endorsement, sponsorship, or affiliation, or naming a fork, product, or service "TokenPak" (or something confusingly similar), is not.
1 maintainer
Metadata
1 maintainer
Release files for tokenpak 1.30.0
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| tokenpak-1.30.0.tar.gz | 2.6 MB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| tokenpak-1.30.0-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 5.8 MB
Release files / tokenpak-1.30.0.tar.gz
| Download URL | tokenpak-1.30.0.tar.gz |
|---|---|
| Size | 2.6 MB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
cdae51f9531cceae4e15b4df38c951d21496e95570f0f27b90564902c47fccf0
|
|
BLAKE2b-256 checksum How to use checksums |
f59528fae5f07869697e73faf2a1358fc30fcfcc4d41c1bfa10190be3550d40a
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Sep 28, 2026.
Transparency logRelease files / tokenpak-1.30.0-py3-none-any.whl
| Download URL | tokenpak-1.30.0-py3-none-any.whl |
|---|---|
| Size | 3.2 MB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
c2b3ff5c30817108da8aeb690f9f95ec10eb43ba08b11bea14b090f95bc4f92a
|
|
BLAKE2b-256 checksum How to use checksums |
7db056c26442aa1c5a84a69847b486663d2b6586e3cf20f46b113cba96dc1814
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Sep 28, 2026.
Transparency log
