tplinkrouterc6u 5.16.0

TP-Link Router API (supports also Mercusys Router)

TP-Link Router API (supports also Mercusys Router)

Python package for API access and management for TP-Link and Mercusys Routers. See Supported routers

[!WARNING] A new router firmware update breaks the compatibility. Please try this fix

Installation

pip install tplinkrouterc6u

Dependencies

• requests
• pycryptodome

Usage

• Enter the host & credentials used to log in to your router management page. Username is admin by default. But you may pass username as third parameter. Some routers have default username - user
• Use Local Password which is for Log In with Local Password. Login with TP-LINK ID doesnt work
• If you use https connection - You need to turn on "Local Management via HTTPS" (advanced->system->administration) in the router web UI

from tplinkrouterc6u import (
    TplinkRouterProvider,
    TplinkRouterV1_11,
    TplinkRouterSG, # For routers like Archer BE3600, Archer BE230
    TplinkRouter,
    TplinkC1200Router,
    TplinkC5400XRouter,
    TPLinkMRClient, # Class for MR series routers which supports old firmwares with AES cipher CBC mode
    TPLinkMRClientGCM, # Class for MR series routers which supports AES cipher GCM mode
    TPLinkMR200Client,
    TPLinkMR6400v7Client,
    TPLinkVRClient,
    TPLinkVR400v2Client,
    TPLinkEXClient, # Class for EX series routers which supports old firmwares with AES cipher CBC mode
    TPLinkEXClientGCM, # Class for EX series routers which supports AES cipher GCM mode
    TPLinkRClient, # For routers like TL-R470GP-AC
    TPLinkXDRClient,
    TPLinkDecoClient,
    TPLinkEAP115Client,
    TPLinkCPE210Client,
    TPLinkSG108EClient,
    TplinkC80Router,
    TplinkWDRRouter,
    TplinkRE330Router,
    TplinkC3200Router,
    Connection
)
from logging import Logger

router = TplinkRouterProvider.get_client('http://192.168.0.1', 'password')
# You may use client directly like
# router = TplinkRouter('http://192.168.0.1', 'password')
# You may also pass username if it is different and a logger to log errors as
# router = TplinkRouter('http://192.168.0.1','password','admin2', logger=Logger('test'))
# If you have the TP-link C5400X or similar, you can use the TplinkC5400XRouter class instead of the TplinkRouter class.
# Remember that the password for this router is different, here you need to use the web encrypted password.
# To get web encrypted password, read Web Encrypted Password section
# router = TplinkC5400XRouter('http://192.168.0.1','WebEncryptedPassword', logger=Logger('test'))

try:
    router.authorize()  # authorizing
    # Get firmware info - returns Firmware
    firmware = router.get_firmware()

    # Get status info - returns Status
    status = router.get_status()
    if not status.guest_2g_enable:  # check if guest 2.4G wifi is disable
        router.set_wifi(Connection.GUEST_2G, True)  # turn on guest 2.4G wifi

    # Get Address reservations, sort by ipaddr
    reservations = router.get_ipv4_reservations()
    reservations.sort(key=lambda a: a.ipaddr)
    for res in reservations:
        print(f"{res.macaddr} {res.ipaddr:16s} {res.hostname:36} {'Permanent':12}")

    # Get DHCP leases, sort by ipaddr
    leases = router.get_ipv4_dhcp_leases()
    leases.sort(key=lambda a: a.ipaddr)
    for lease in leases:
        print(f"{lease.macaddr} {lease.ipaddr:16s} {lease.hostname:36} {lease.lease_time:12}")
finally:
    router.logout()  # always logout as TP-Link Web Interface only supports upto 1 user logged

The TP-Link Web Interface only supports upto 1 user logged in at a time (for security reasons, apparently). So before action you need to authorize and after logout

Web Encrypted Password

If you got exception - use web encrypted password instead. Check the documentation! or you have TP-link C5400X or similar router you need to get web encrypted password by these actions:

1. Go to the login page of your router. (default: 192.168.0.1).
2. Type in the password you use to login into the password field.
3. Click somewhere else on the page so that the password field is not selected anymore.
4. Open the JavaScript console of your browser (usually by pressing F12 and then clicking on "Console").
5. Type document.getElementById("login-password").value;
6. Copy the returned value as password and use it.

Functions

Function	Args	Description	Return
get_firmware		Gets firmware info about the router	Firmware
get_status		Gets status about the router info including wifi statuses and connected devices info	Status
get_ipv4_status		Gets WAN and LAN IPv4 status info, gateway, DNS, netmask	IPv4Status
get_ipv4_reservations		Gets IPv4 reserved addresses (static)	[IPv4Reservation]
get_ipv4_dhcp_leases		Gets IPv4 addresses assigned via DHCP	[IPv4DHCPLease]
set_wifi	wifi: Connection, enable: bool	Allow to turn on/of 4 wifi networks
reboot		reboot router
authorize		authorize for actions
logout		logout after all is done
get_vpn_status		Gets VPN info for OpenVPN and PPTPVPN and connected clients amount	VPNStatus
set_vpn	vpn: VPNStatus, enable: bool	Allow to turn on/of VPN
send_sms	phone_number: str, message: str	Send sms for LTE routers
send_ussd	command: str	Send USSD command for LTE routers	str
get_sms		Get sms messages from the first page for LTE routers	[SMS]
set_sms_read	sms: SMS	Set sms message read from the first page for LTE routers
delete_sms	sms: SMS	Delete sms message from the first page for LTE routers
get_lte_status		Get lte info for LTE routers	LTEStatus

Dataclass

Firmware

Field	Description	Type
hardware_version	Returns like - Archer C6U	str
model	Returns like - Archer C6U v1.0	str
firmware_version	Returns like - 1.1.3 Build 3425243	str

Status

Field	Description	Type
wan_macaddr	router wan mac address	str, None
wan_macaddress	router wan mac address	macaddress.EUI48, None
lan_macaddr	router lan mac address	str
lan_macaddress	router lan mac address	macaddress.EUI48
wan_ipv4_addr	router wan ipv4 address	str, None
wan_ipv4_address	router wan ipv4 address	ipaddress.IPv4Address, None
lan_ipv4_addr	router lan ipv4 address	str, None
lan_ipv4_address	router lan ipv4 address	ipaddress.IPv4Address, None
wan_ipv4_gateway	router wan ipv4 gateway	str, None
wan_ipv4_gateway_address	router wan ipv4 gateway address	ipaddress.IPv4Address, None
wired_total	Total amount of wired clients	int
wifi_clients_total	Total amount of host wifi clients	int
guest_clients_total	Total amount of guest wifi clients	int
clients_total	Total amount of all connected clients	int
iot_clients_total	Total amount of all iot connected clients	int, None
guest_2g_enable	Is guest wifi 2.4G enabled	bool
guest_5g_enable	Is guest wifi 5G enabled	bool, None
guest_6g_enable	Is guest wifi 6G enabled	bool, None
iot_2g_enable	Is IoT wifi 2.4G enabled	bool, None
iot_5g_enable	Is IoT wifi 5G enabled	bool, None
iot_6g_enable	Is IoT wifi 6G enabled	bool, None
wifi_2g_enable	Is host wifi 2.4G enabled	bool
wifi_5g_enable	Is host wifi 5G enabled	bool, None
wifi_6g_enable	Is host wifi 6G enabled	bool, None
wan_ipv4_uptime	Internet Uptime	int, None
mem_usage	Memory usage in percentage between 0 and 1	float, None
cpu_usage	CPU usage in percentage between 0 and 1	float, None
conn_type	Connection type	str, None
devices	List of all connectedd devices	list[Device]

Device

Field	Description	Type
type	client connection type (2.4G or 5G, guest wifi or host wifi, wired)	Connection
macaddr	client mac address	str
macaddress	client mac address	macaddress
ipaddr	client ip address	str
ipaddress	client ip address	ipaddress
hostname	client hostname	str
packets_sent	total packets sent	int, None
packets_received	total packets received	int, None
down_speed	download speed	int, None
up_speed	upload speed	int, None
tx_rate	transmit rate (Mbps)	int, None
rx_rate	receive rate (Mbps)	int, None
online_time	client online time (seconds)	float, None
traffic_usage	total traffic usage (bytes)	int, None
signal	Signal strength	int, None
active	Is active device	bool

IPv4Reservation

Field	Description	Type
macaddr	client mac address	str
macaddress	client mac address	macaddress
ipaddr	client ip address	str
ipaddress	client ip address	ipaddress
hostname	client hostname	str
enabled	enabled	bool

IPv4DHCPLease

Field	Description	Type
macaddr	client mac address	str
macaddress	client mac address	macaddress
ipaddr	client ip address	str
ipaddress	client ip address	ipaddress
hostname	client hostname	str
lease_time	ip address lease time	str

IPv4Status

Field	Description	Type
wan_macaddr	router mac address	str
wan_macaddress	router mac address	macaddress
wan_ipv4_ipaddr	router mac address	str, None
wan_ipv4_ipaddress	router mac address	ipaddress.IPv4Address, None
wan_ipv4_gateway	router WAN gateway IP address	str, None
wan_ipv4_gateway_address	router WAN gateway IP address	ipaddress.IPv4Address, None
wan_ipv4_conntype	router connection type	str
wan_ipv4_netmask	router WAN gateway IP netmask	str, None
wan_ipv4_netmask_address	router WAN gateway IP netmask	ipaddress.IPv4Address, None
wan_ipv4_pridns	router primary dns server	str
wan_ipv4_pridns_address	router primary dns server	ipaddress
wan_ipv4_snddns	router secondary dns server	str
wan_ipv4_snddns_address	router secondary dns server	ipaddress
lan_macaddr	router mac address	str
lan_macaddress	router mac address	macaddress
lan_ipv4_ipaddr	router LAN IP address	str
lan_ipv4_ipaddress	router LAN IP address	ipaddress
lan_ipv4_dhcp_enable	router LAN DHCP enabled	bool
lan_ipv4_netmask	router LAN gateway IP netmask	str
lan_ipv4_netmask_address	router LAN gateway IP netmask	ipaddress
remote	router remote	bool, None

VPNStatus

Field	Description	Type
openvpn_enable	OpenVPN is enabled	bool
pptpvpn_enable	PPTPVPN is enabled	bool
ipsecvpn_enable	IPSEC is enabled	bool
openvpn_clients_total	OpenVPN clients connected	int
pptpvpn_clients_total	PPTPVPN clients connected	int

SMS

Field	Description	Type
id	message index	int
sender	sender	str
content	sms text	str
received_at	received datetime	datetime
unread	is message unread	bool

LTEStatus

Field	Description	Type
enable	is enabled	int
connect_status	connect status	int
network_type	network type	int
network_type_info	Example: 4G LTE	str
sim_status	sim status	int
sim_status_info	Example: SIM locked.	str
total_statistics	total statistics in bytes	int
cur_rx_speed	current download speed in bytes per second	int
cur_tx_speed	current upload speed in bytes per second	int
sms_unread_count	sms unread amount	int
sig_level	signal level	int
rsrp	RSRP	int
rsrq	RSRQ	int
snr	SNR	int
isp_name	ISP name	str
network_types	All possible network types - {0: "No Service", 1: "GSM", 2: "WCDMA", 3: "4G LTE", 4: "TD-SCDMA", 5: "CDMA 1x", 6: "CDMA 1x Ev-Do", 7: "4G+ LTE"}	dict
sim_statuses	All possible sim statuses - {0: "No SIM card detected or SIM card error.", 1: "No SIM card detected.", 2: "SIM card error.", 3: "SIM card prepared.", 4: "SIM locked.", 5: "SIM unlocked. Authentication succeeded.", 6: "PIN locked.", 7: "SIM card is locked permanently.", 8: "suspension of transmission", 9: "Unopened"}	dict

Enum

Connection

• Connection.HOST_2G - host wifi 2.4G
• Connection.HOST_5G - host wifi 5G
• Connection.HOST_6G - host wifi 5G
• Connection.GUEST_2G - guest wifi 2.4G
• Connection.GUEST_5G - guest wifi 5G
• Connection.GUEST_6G - guest wifi 5G
• Connection.IOT_2G - IoT wifi 2.4G
• Connection.IOT_5G - IoT wifi 5G
• Connection.IOT_6G - IoT wifi 6G
• Connection.WIRED - Wired

VPN

• VPN.OPEN_VPN
• VPN.PPTP_VPN
• VPN.IPSEC

Supported routers

• TP-LINK routers
• MERCUSYS routers

TP-LINK routers

• Archer A10 v1
• Archer A20 v1.0
• Archer A6 (2.0, 4.0)
• Archer A7 V5
• Archer A8 (1.0, 2.20)
• Archer A9 V6
• Archer AX10 v1.0
• Archer AX11000 V1
• Archer AX12 v1.0
• Archer AX17 v1.0
• Archer AX1800
• Archer AX20 (v1.0, v3.0)
• Archer AX21 (v1.20, v3.0, v4.6)
• Archer AX23 (v1.0, v1.2)
• Archer AX3000 V1
• Archer AX50 v1.0
• Archer AX53 (v1.0, v2)
• Archer AX55 (v1.0, V1.60, v4.0)
• Archer AX58 v1.0
• Archer AX6000 V1
• Archer AX72 V1
• Archer AX73 (V1, V2.0)
• Archer AX75 V1
• Archer AX90 V1.20
• Archer AX95 v1.0
• Archer AXE16000
• Archer AXE5400 v1.0
• Archer AXE75 V1
• Archer BE220 v1.0
• Archer BE230 v1.0
• Archer BE3600 (v1.0, v1.2, v1.6)
• Archer BE400 v1.0
• Archer BE550 v1.0
• Archer BE800 v1.0
• Archer BE805 (v1.0, v1.20)
• Archer C1200 (v1.0, v2.0)
• Archer C2300 (v1.0, v2.0)
• Archer C24 (1.0, 2.0)
• Archer C3200 v1
• Archer C5400X V1
• Archer C6 (v2.0, v3.0, v3.20, 4.0)
• Archer C60 v2.0
• Archer C64 1.0
• Archer C6U v1.0
• Archer C7 (v4.0, v5.0)
• Archer C80 (1.0, 2.20)
• Archer GX90 v1.0
• Archer MR200 (v2, v5, v5.3, v6.0)
• Archer MR550 v1
• Archer MR600 (v1, v2, v3)
• Archer NX200 (v1.0, v2.0)
• Archer VR1200v v1
• Archer VR2100v v1
• Archer VR400 (v2, v3)
• Archer VR600 v3
• Archer VR900v
• Archer VX1800v v1.0
• Archer VX231v v1.0
• BE11000 2.0
• CPE210 v2.0
• Deco M4 2.0
• Deco M4R 2.0
• Deco M5 v3
• Deco M9 Plus 1.0
• Deco M9 Pro
• Deco P7
• Deco X20
• Deco X50 v1.3
• Deco X50-5G 1.20
• Deco X55 1.0
• Deco X60 V3
• Deco X90
• Deco XE75 (v1.0, v2.0)
• Deco XE75PRO (v3.0)
• EAP115 v2.0
• EX511 v2.0
• HX510 v1.0
• M8550 v1
• NE200-Outdoor v1.0
• NE211-Outdoor v1.0
• NX510v v1.0
• NX600 v2.0
• RE305 4.0
• RE315 1.0
• RE330 v1
• TD-W9960 (v1, V1.20)
• TL-MR100 v2.0
• TL-MR100-Outdoor v1.0
• TL-MR105
• TL-MR110-Outdoor v1.0
• TL-MR150 v2
• TL-MR6400 (v5, v5.3, v7)
• TL-MR6500v
• TL-R470GP-AC 4.0
• TL-R488GPM-AC 2.0
• TL-SG108E v6.0
• TL-WA1201 3.0
• TL-WA3001 v1.0
• TL-WDR3600 V1
• TL-XDR3010 V2
• TL-XDR5410 1.0
• TL-XDR6088 v1.0.30
• VX420-G2h v1.1
• VX800v v1
• XC220-G3v v2.30

MERCUSYS routers

• AC10 1.20
• Halo H3000x 1.0
• Halo H47BE 2.0
• Halo H60XR 1.0
• Halo H80X 1.0
• ME30 1.0
• MR47BE v1.0
• MR50G 1.0

Please let me know if you have tested integration with any other model. Open an issue with info about router's model, hardware and firmware versions.

Adding Support For More Models

Guidelines CONTRIBUTING.md

Local Development

• Download this repository.
• Run pip install -e path/to/repo.
• Make changes to files within the tplinkrouter6u directory.
• Exercise the changes following the "Usage" section above.

The sanity check test.py illustrates a few tests and runs through a list of queries in queries.txt creating logs of the results of each query in the logs folder. This can be used to capture the dictionary output of all cgi-bin form submissions.

Run tests

• Run python -m unittest discover ./test

Thanks To

• EncryptionWrapper for TP-Link Archer C6U by @Singleton-95
• Encryption for TP-Link W9960 by @Electry