trec_dd 0.3.1

TREC Dynamic Domain (DD) evaluation test harness for simulating user interaction with a search engine

# trec-dd-simulation-harness

This is the official "jig" for simulating a user interacting with a
TREC DD system during an interactive query session.

# Usage

After installation (see below), you will want run the harness to
generate a run file, you want to use the `trec_dd_harness` command.

The purpose of this harness is to interact with your TREC DD system
by issuing queries to your system, and providing feedback (truth data)
for the results produced by your system. While it does this, it keeps
track of the results produced by your system in a `run file`. After
generating a run file with this harness, you can score the run using
trec_dd_scorer

The harness is run via three commands: start, step, stop. Typically,
a system will invoke start, then invoke step multiple times, and then
invoke stop. Every invocation must include the -c argument with a
path to a valid config.yaml file, as illustrated in
example/config.yaml. For efficiency, the first time you run with a
new configuration, the truth data must be loaded into your database
using the `load` command.

By default, when you score a system using the harness, all of the
topics are applied to the system in an order selected by the harness.
You can limit the topic_ids that are used by specifying the topic_ids
property in the config.yaml

The harness keeps track of the topic_ids that have not yet been used
in building your system's run file. To reset this state, you must run
the `init` command.

To progress through the topics, your system must execute this double
while loop, which is exactly what is implemented in the
trec_dd/system/ambassador_cli.py example:

`init`
while 1:
topic_id <-- `start`
if topic_id is None: break
while 1:
results <-- run your system
feedback <-- `step(results)`
if feedback is None or len(feedback) < batch_size:
break
else:
your system processes the feedback
`stop`

Each of the five commands returns a JSON dictionary which your system
can read using a JSON library. The harness always provides feedback
for every result, even if the feedback is that the system has no truth
data for that result. Note that your use of the harness *must* call
`stop` in the next iteration after any step in which you submit fewer
than batch_size results. If you fail to do this, the harness will
exit.

See trec_dd/system/ambassador_cli.py for an example of using the
harness from python.


To score a runfile (see "Scoring the System"):

trec_dd_scorer -c config.yaml run_file_in.txt run_file_scored.json > pretty_table.txt 2> log.txt &


This repository also provides a baseline system that randomizes
subtopic ordering (see "Example TREC DD Systems"). In particular this
baseline system shows how to hook an a system up to the jig in python.
Hooking a system up to the jig via the command line is further
documented below.

trec_dd_random_system -c config.yaml &> log.txt &

The scores for this baseline system using an early version of the TREC
DD truth data are:

|Score|Metric|
|-----|------|
|0.659|average_err_arithmetic|
|0.302|average_err_harmonic|
|0.002|cube_test|
|0.559|modified_precision_at_recall|
|0.996|precision_at_recall|
|0.386|reciprocal_rank_at_recall|


# Installation

The recommended way to install and use the scorer is with python
virtualenv, which is a standard tool on all widely used platforms.
For example on Ubuntu:

apt-get install python-virtualenv
virtualenv vpy

or on CentOS:

yum install python-virtualenv
virtualenv vpy

or on MacOS X

brew install pyenv-virtualenv
pyenv-virtualenv vpy

or [on Windows](http://www.tylerbutler.com/2012/05/how-to-install-python-pip-and-virtualenv-on-windows-with-powershell/).

You will also need a database. We recommend postgres or mysql. You
can install this on your system using standard tools. The connection
information must be written into the config.yaml file referenced in
the commands above. See [config.yaml](examples/config.yaml) for an
example.

Once you have a virtualenv, the following commands will install the
trec_dd scorer. You should choose whether you are using mysql or
postgres and specify that as a pip extras declaration in square
brackets as follows:

. vpy/bin/activate
pip install trec_dd_simulation_harness[mysql]

or to use postgres:

. vpy/bin/activate
pip install trec_dd_simulation_harness[postgres]

That will create the shell entry points for running the two commands
illustrated at the top of this file.


# Simulation Harness

If you wish to evaluate a TREC DD system, you must run it against the
TREC DD simulation harness. A system interacting with the simulation
harness will produce a "runfile" that summarizes the simulation
session. The "runfile", for each of the system's response, encodes
information such as (1) "was the system's response on topic?" (2)
"what subtopics were contained within the system's response?" and (3)
"how relevant was the system's response?". Please see the
specification for a "runfile" for more information.

A TREC DD system interacts with the simulation harness by invoking
commands at the command line. Systems written in python may use
the [HarnessAmbassadorCLI](trec_dd/system/ambassador_cli.py) to
facilitate this communication. The HarnessAmbassadorCLI is also useful
documentation for how one should interact with the harness via the
command line.

Once you have a "runfile", you may then score your run. Please
see the section "Gathering Scores" for more information.

# Example TREC DD Systems

The directory trec\_dd/system holds example TREC DD systems to
demonstrate interaction with the simulation harness using a TREC DD
system. Right now, the only example system is random_system.py.

# Executing the Random System

## Requirements

To run the example systems, you must have a truth data csv file.

## Running the System

You can run the random system in the simulation harness by
calling

trec_dd_random_system -c config.yaml &> log.txt &

After this command executes, you should find the resulting system
runfile at the path you specified in the command. The runfile summarizes
the responses the random system gave to the harness, as well as the harness's
thoughts on those responses. This runfile captures everything one needs to
know in order to give a system a score.

## Scoring the System

To score your runfile, you may use the trec_dd/scorer/run.py script.

trec_dd_scorer -c config.yaml run_file_in.txt run_file_scored.json > pretty_table.txt 2> log.txt &

Please see the section titled "Gathering Scores" for more information on the scoring
subsystem.

# Gathering Scores

## Requirements

You must have a runfile generated for your system if you wish to score
it. You must also have access to the truth data used by the harness
when generating the runfile.

## Running the Scorer

The top-level scoring script trec\_dd/scorer/run.py is used to generate
scores. To run it:

trec_dd_scorer -c config.yaml run_file_in.txt run_file_scored.json > pretty_table.txt 2> log.txt &

This will go through your runfile and run each TREC DD scorer. If you
wish to run specific scorers, rather than all of them, please see the
'--scorer' option on the trec\_dd\_scorer command. The scorers
specified after the --scorer option must be the names of scorers known
to the system. These are exactly the following:

* reciprocal\_rank\_at\_recall
* precision\_at\_recall
* modified\_precision\_at\_recall
* average\_err\_arithmetic
* average\_err\_harmonic
* average\_err\_arithmetic\_binary
* average\_err\_harmonic\_binary

# Description of Scorers

* reciprocal\_rank\_at\_recall calculates the reciprocal of the rank by which
every subtopic for a topic is accounted for.

* precision\_at\_recall calculates the precision of all results up to the point
where every subtopic for a topic is accounted for.

* average\_err\_arithmetic calculates the expected reciprocal rank
for each subtopic, and then average the scores accross subtopics
using an arithmetic average. It uses a graded relevance for computing
stopping probabilities.

* average\_err\_arithmetic\_binary calculates the expected reciprocal
rank for each subtopic, and then averages the scores accross
subtopics using an arithmetic average. It uses binary relevance for
computing stopping probabilities. Hence, this scorer ignores the
'rating' field in the runfile.

* average\_err\_harmonic calculates the expected reciprocal rank for
each subtopic, and then averages the scores accross subtopics using
an arithmetic average. It uses graded relevance for computing
stopping probabilities.

* average\_err\_harmonic\_binary average\_err\_harmonic calculates the expected reciprocal rank for
each subtopic, and then averages the scores accross subtopics using
an arithmetic average. It uses binary relevance for computing stopping probabilities. Hence,
this scorer ignores the 'rating' field in the runfile.