Trialmark

Trialmark is an open-source framework for evaluating language models and acceptance-testing them for your task. Test models on your own cases, fix the pass mark before you see the results, and get a reproducible record of accuracy, cost and speed, with a gate your pipeline can enforce.

Evaluation measures how models perform. Acceptance testing decides whether a model is good enough for the task, against a rule written down before the results are seen, and records that decision so anyone can check it. Trialmark does both.

What you can do with Trialmark

You are building something with an AI model and have to choose one. A bigger model is usually more accurate but costs more and is slower; a smaller one is cheaper, but is it good enough for your task? Trialmark answers that with evidence from your own questions, not a leaderboard.

1. Try it in two minutes with a ready-made example. trialmark init qa gives you a small working project: a short made-up contract, ten questions about it with the right answers, and a settings file. Add your API key and run it. Two models answer the questions and a third model grades their answers. There are starters for four other kinds of task too: extracting fields, classifying, summarising and calculating.

2. Test models on your own questions. Put your questions and their right answers in a spreadsheet saved as CSV, label each question with its kind if you like ("simple fact", "needs several parts"), and name the models you want to compare. Trialmark asks every model every question, several times over, because models do not answer the same way every time.

3. Decide what "good enough" means before you see the results. You write the rule down first, for example "pick the cheapest model that scores within 3 points of the best one". Trialmark saves it before any model runs, so nobody can quietly move the goalposts after seeing the numbers. Then it applies your rule and names the winner.

4. See accuracy, cost and speed side by side. For each model: how often it was right, partly right or wrong; whether its answers stuck to your documents or added things that are not there; whether it correctly said "I don't know" when the answer was not available; what it cost; and how long it took. The results are also broken down by kind of question. That is often the most useful part: a cheap model may be perfect on simple facts and slip on harder, multi-part questions.

5. Know the cost before you spend anything. A run first shows the plan and an estimated bill, and spends nothing. Models are called only when you add --yes, and --limit 3 tries the first three questions before the full run.

6. Let a model grade the answers, then check the grader. Free-text answers cannot be marked by matching text exactly, so Trialmark uses an AI model as the judge, comparing each answer with your right answer. To know whether to trust it, trialmark judge-check gives you a sample of answers to mark yourself, without showing the judge's marks, and tells you how often you agreed.

7. Keep a record anyone can check, and use it to block bad changes. Every run saves one file holding exactly what was tested: the questions, with a fingerprint that proves they did not change, the models, your rule, every answer and every cost. trialmark gate turns that into a pass or a fail, so your build pipeline can refuse a model switch that does not meet your rule.

8. Test your own system, not just a bare model. If your app does more than call a model, for example searching your own documents first, write a small Python function that calls your app, and Trialmark tests the whole thing. You can also add your own pieces, such as a new model provider, a new way of grading or a new file format, without forking Trialmark.

What it does not do yet. There is no web dashboard or HTML report; reports are text, Markdown or JSON. And it cannot yet prove who ran a test: the fingerprints catch accidental changes, not deliberate tampering. Signed records are planned.

Trialmark runs on your own machines. Your test sets, reference answers and records stay with you.

Where it comes from

Trialmark was spun out of the model benchmark in Forge, a governed layer through which organisations delegate work to AI. That benchmark compares models on a fixed set of business-document questions, through Forge's own answer path, with three repeats and accuracy, cost and speed side by side. Trialmark makes the same kind of test available to any developer or team, with or without Forge.

Status

Trialmark is at an early stage.

Install

pip install trialmark

Python 3.10 or later. The core has no dependencies. To call models directly, add the provider's SDK as an extra:

pip install "trialmark[anthropic]"
pip install "trialmark[openai]"

Quick start with your own key

Each starter tests two models on a small fictional task and runs as it is. Bring an Anthropic or OpenAI key:

pip install "trialmark[anthropic]"
export ANTHROPIC_API_KEY=...

trialmark init qa                             # writes trialmark-qa-anthropic/
cd trialmark-qa-anthropic
trialmark run config.json                     # the plan and a cost estimate; spends nothing
trialmark run config.json --limit 3 --yes     # three questions first
trialmark run config.json --by-tag --yes      # the full test, about $1
trialmark gate record.json --model claude-haiku-5-5

For OpenAI, use "trialmark[openai]", OPENAI_API_KEY and trialmark init qa --provider openai. Every starter is also in examples/starters/, each with a README on making it yours: your cases, your models, your instructions and your pass mark.

Kinds of task

Trialmark tests any task where you can give a model an input and say what a good output is. docs/tasks.md explains each kind: how it is marked, what your test cases look like, and how to set it up.

Conversations and agents (several turns, tool calls) are not supported yet.

Nothing is spent without --yes. trialmark run first prints the plan and an estimate for each model and for the judge. The estimate errs on the high side; the record holds what was actually spent, the judge's share included. --limit N runs the first N questions and --only q3,q7 runs the ones named, so you can try a few before the full run.

Try it without a key

The examples folder also holds a five-question test set and a configuration that compares stand-in models, so a run needs no API key. Run it from the repository's root folder:

trialmark validate examples/testset.json
trialmark run examples/config.json --by-tag --yes
trialmark report examples/config-run-record.json --format markdown
trialmark gate examples/config-run-record.json --model perfect-model
trialmark plugins

One of its models is a function of your own (examples/my_model.py), whose cost Trialmark cannot know, which is why that run also asks for --yes. examples/run-record.json is an illustrative record of three made-up models whose scores are invented to show the format. They are not measurements of any real model.

Compare models on your own questions

This configuration compares two Claude models, gives each the whole source document, and has a third model grade every answer against your reference answers:

{
  "test_set": "my-questions.csv",
  "pass_mark": {
    "metric": "correct", "tolerance_points": 3, "floors": { "grounded": 0.95 }, "choose": "cheapest"
  },
  "repeats": 3,
  "concurrency": 4,
  "models": [
    { "id": "claude-sonnet-5-5", "runner": "anthropic",
      "settings": { "documents": ["contract.md"], "pricing": { "input": 2.0, "output": 10.0, "cache_read": 0.2 } } },
    { "id": "claude-haiku-5-5", "runner": "anthropic",
      "settings": { "documents": ["contract.md"], "pricing": { "input": 0.1, "output": 0.5 } } }
  ],
  "scorers": [
    { "name": "judge", "options": { "model": "claude-opus-5-5", "documents": ["contract.md"] } }
  ],
  "output": "run-record.json"
}

export ANTHROPIC_API_KEY=...
trialmark run config.json                 # the estimate
trialmark run config.json --by-tag --yes  # the run

Every run calls the models for real and costs money: here, two models, three repeats and every question, plus one judge call per answer.

A few things to know:

• Prices are yours to give, in US dollars per million tokens, because they change. Check your provider's current prices. A model without prices reports a cost of zero, with a note on each result.
• The judge works best when it is not one of the models under test. Give it pricing too, so its spend is estimated and recorded. Its model, the documents it read, a hash of its rules and what it spent are kept in the record. rules_file replaces the built-in rules with your own.
• Check the judge against your own grades before relying on it: trialmark judge-check sample record.json --test-set questions.csv writes 20 answers to grades.csv without the judge's verdicts; fill in your_verdict with correct, partial or incorrect, then trialmark judge-check score record.json grades.csv shows how often the judge agreed with you and lists each disagreement.
• OpenAI models use "runner": "openai", and the judge takes "provider": "openai".
• Your own system, such as your own retrieval pipeline, plugs in through the python runner: write a function that takes the model's name, the question and the settings, and returns the answer, or a trialmark.RunOutput with its cost and tokens. Name it in the model's settings as "callable": "my_system.py:answer".
• Exact match ("scorers": ["exact-match"]) is enough for short answers such as a number or a date, and costs nothing.

Use it from Python

from trialmark import ModelEntry, PassMark, load_with, make_scorer, render, run_trial

record = run_trial(
    load_with("my-testset.csv"),
    PassMark(metric="correct", tolerance_points=3, floors={"grounded": 0.95}, choose="cheapest"),
    [ModelEntry(id="model-a", runner="mine"), ModelEntry(id="model-b", runner="mine")],
    runners={"mine": MyRunner()},          # any object with run(model, case) -> RunOutput
    scorers=[make_scorer("exact-match"), MyGroundednessScorer()],
    repeats=3,
    concurrency=4,
)
record.save("run-record.json")
print(render(record, "text", by_tag=True))

Customising Trialmark

There are four customisation points: runners (call a model), scorers (turn an answer into metrics), loaders (read a test set from a file format) and report writers. ARCHITECTURE.md gives each interface and explains what stays fixed in the core and why.

You do not need to fork Trialmark to customise it. Install it from PyPI and add plugins:

• For a one-off model call, use the python runner, as above.
• From Python, pass your own runner and scorer objects to run_trial.
• To share a plugin, publish it as its own package.

Writing a plugin

A plugin package declares an entry point in one of the groups trialmark.runners, trialmark.scorers, trialmark.loaders or trialmark.reports:

# trialmark_acme/__init__.py
from trialmark import RunOutput

class AcmeRunner:
    def __init__(self, endpoint="https://api.acme.example"):
        self.endpoint = endpoint

    def run(self, model, case):
        reply = call_acme(self.endpoint, model.id, case.input, **model.settings)
        return RunOutput(output=reply.text, cost_usd=reply.cost)

# pyproject.toml of the plugin package
[project.entry-points."trialmark.runners"]
acme = "trialmark_acme:AcmeRunner"

Once it is installed, trialmark plugins lists it, and a configuration uses it with "runner": "acme", with options under "runners": {"acme": {"endpoint": "..."}}. A plugin cannot take the name of a built-in plugin.

Formats

Test set

{
  "name": "contract-questions",
  "version": "2026-11-05",
  "cases": [
    { "id": "q1", "input": "What is the notice period?", "reference": "Sixty days' written notice.", "tags": ["factual"] }
  ]
}

The hash covers the cases (their ids, inputs, references and tags), not the name or version. It is the SHA-256 of canonical JSON under RFC 8785, so other languages can compute the same hash. Hashes written before 0.3 start with sha256: and are still checked. trialmark schema testset, passmark and run-record print the JSON Schema of each format.

Pass mark

Metrics are whatever your scorer produces, each between 0 and 1. A model's score on a metric is the mean within each repeat; the report shows the mean of those and their range.

Licence

Apache-2.0. See LICENSE.