trustedlicenses

⚠️ Project Status: Experimental

trustedlicenses (v0.2.0) is an early, experimental release. Detection, policy evaluation, and the CLI work end-to-end with full test coverage, but the API and config format aren't stable yet, and license detection — declared-metadata parsing and the Rust text-matching fallback alike — can be wrong. See the legal disclaimer before relying on this for a real compliance decision.

trustedlicenses checks that every package installed in your Python project has a license you've agreed to allow, so you can gate a CI build on it. Point it at your environment, tell it which kinds of license are acceptable, and it tells you which packages don't comply and why.

Quick look

Nothing to configure first — just run it. With no policy set up yet, a real terminal walks you through one interactively, explaining what each license category actually means as you go:

$ trustedlicenses
Detected licenses for 20 of 20 installed packages.

No policy configured yet -- would you like to run the guided setup? [Y/n]: y

Permissive: MIT, BSD, Apache-2.0, ISC, ... -- minimal restrictions: use, modify, and
redistribute freely, usually with just an attribution/copyright notice.
  (20 detected)
Allow Permissive licenses? [Y/n]: y
...
Wrote policy to pyproject.toml.

That writes a [tool.trustedlicenses] table to your pyproject.toml (or a standalone trustedlicenses.toml, your choice) — see No policy configured yet? below for the full transcript. Or skip the wizard and write it yourself:

[tool.trustedlicenses]
allowed-categories = ["Permissive", "Public Domain", "Copyleft Limited"]

Either way, running it again just checks:

uv run trustedlicenses

If everything's fine, you get a one-line pass:

Checking dependency licenses...
✓ All 134 packages passed.

If something isn't, you get exactly what's wrong, and a concrete suggestion for how to fix it:

Checking dependency licenses...
✗ Disallowed or undetectable licenses in 2 of 134 packages:
  certifi: detected MPL-2.0 (categories: Copyleft Limited) -- from declared metadata
    -> add "Copyleft Limited" to allowed-categories, or "certifi" to ignored-packages, to allow this
  fqdn: detected MPL-2.0 (categories: Copyleft Limited) -- from license files: LICENSE
    -> add "Copyleft Limited" to allowed-categories, or "fqdn" to ignored-packages, to allow this

The process exits non-zero on any failure, so it plugs straight into CI. ✓/✗ lines are green/red (and compatibility notes yellow) in a real terminal — colors are stripped automatically when output isn't a TTY (piped, redirected, NO_COLOR), exactly like ANSI color handling in most CLI tools.

Full docs: trustedlicenses.readthedocs.io

Installation

uv add --dev trustedlicenses

Usage

Add a [tool.trustedlicenses] table to your pyproject.toml (or run trustedlicenses interactively and let the wizard write it — see below):

[tool.trustedlicenses]
allowed-categories = ["Permissive", "Public Domain", "Copyleft Limited"]
ignored-packages = ["mypy-extensions"]

A standalone trustedlicenses.toml (same keys, no [tool.trustedlicenses] wrapper) works too, and takes priority if both exist.

• allowed-categories (required, no default) — the kinds of license your project accepts. A package passes if at least one of its detected licenses falls into one of these categories. There's no default on purpose: you say what you're willing to accept, rather than inherit an assumption.
• ignored-packages (optional) — specific packages to skip entirely, for cases you've reviewed by hand and decided are fine regardless of what's detected.

If your own project declares its license ([project.license], per PEP 639), trustedlicenses also checks it against each dependency for a small number of specific, well-documented copyleft compatibility problems — e.g. a real installed environment where a GPL-2.0-only project pulled in scipy (GPL-3.0-or-later):

i 1 compatibility note(s) -- not a pass/fail result, see below:
  scipy: your project is GPL-2.0-only; scipy is GPL-3.0-or-later -- the FSF states
  GPLv2 is not, by itself, compatible with GPLv3 (https://www.gnu.org/licenses/gpl-faq.html#AllCompatibility)

This is deliberately narrow and never affects pass/fail — see Usage Guide § compatibility notes for exactly what it does and doesn't check, and why.

Then run:

uv run trustedlicenses

This checks every package installed in the current environment. See the Usage Guide for the full category vocabulary, embedding the check in your own code, and how detection works under the hood.

No policy configured yet?

In a real terminal, running trustedlicenses with nothing configured first reports how many installed packages actually have a detectable license, then offers the interactive wizard shown above — allow/decline each of Permissive, Public Domain, Copyleft Limited, and (strong) Copyleft with an explanation for each and how many (and, for one or two, which) of your installed packages fall into it, choose pyproject.toml or a standalone trustedlicenses.toml, and it writes the config and runs the check immediately.

Without a real terminal — CI, pre-commit, piped input, or --quiet explicitly — it never prompts (that would just hang a pipeline). Instead: report-only mode, every installed package's detected license and category, no pass/fail judgment, exit code 0:

$ trustedlicenses --quiet
i pyproject.toml has no policy configured yet -- showing detected licenses only.
  babel: BSD-3-Clause (Permissive)
  certifi: MPL-2.0 (Copyleft Limited)
  jinja2: BSD-3-Clause (Permissive)
  ...

Use --quiet (-q) in CI/CD and pre-commit hooks. Both are non-interactive already, so trustedlicenses falls back on its own — but pass --quiet explicitly so that holds even if a step happens to have a terminal attached.

pre-commit

trustedlicenses audits whatever's actually installed in the current Python environment, so the hook needs to run with your project's own dependencies already installed — not in an isolated hook-specific environment the way most pre-commit hooks work. Add trustedlicenses as a dev dependency (see Installation), then reference this repo directly:

- repo: https://github.com/w-martin/trustedlicenses
  rev: v0.2.0
  hooks:
    - id: trustedlicenses

Or write the same thing as a local hook without depending on this repo's tag:

- repo: local
  hooks:
    - id: trustedlicenses
      name: trustedlicenses
      entry: trustedlicenses --quiet
      language: system
      pass_filenames: false

GitHub Actions

A composite action wraps the same install-then-run steps. Run it in the same job as your dependency install step, after your project's own dependencies are already on the Python path:

- name: Install dependencies
  run: pip install -r requirements.txt   # or uv sync, poetry install, ...

- name: Check dependency licenses
  uses: w-martin/trustedlicenses@v0.2.0

It accepts two optional inputs: version (pin the trustedlicenses release, as a pip version specifier — defaults to latest) and args (defaults to --quiet). It installs with uv pip install when uv is already on PATH, falling back to plain pip install otherwise.

As a second safety net if --quiet gets left off by mistake, every wizard prompt also times out after 30 seconds with no answer — some CI runners attach something that looks enough like a real terminal that this can't be told apart reliably, so a misconfigured job times out and falls back gracefully instead of hanging forever.

An actual misconfiguration (a config with an empty or missing allowed-categories) is always a hard error, with the exact TOML to add — never the wizard, never the report-only fallback.

Checking a package before you add it

trustedlicenses check <package> [<package> ...] resolves the package(s) — and every transitive dependency — into an isolated temporary location, and checks the whole set against your project's policy, without installing anything into your real environment or assuming which installer (uv, pip, Poetry, Pipenv, ...) your project uses. A real example, checking requests against a Permissive-only policy:

$ trustedlicenses check requests
Resolving requests and its transitive dependencies...
Checking 5 package(s) (requested plus transitive dependencies)...
✗ Disallowed or undetectable licenses in 1 of 5 packages:
  certifi: detected MPL-2.0 (categories: Copyleft Limited) -- from declared metadata
    -> add "Copyleft Limited" to allowed-categories, or "certifi" to ignored-packages, to allow this

Why not just read pip list's license column?

Most Python license tools (pip-licenses, licensecheck) only read what a package says its license is, in its own metadata. That's usually right, but a meaningful slice of installed packages declare nothing usable at all — no metadata to read, so nothing to check.

trustedlicenses does that same check first, then — only when a package hasn't declared anything usable — actually reads the license text it ships and matches it against the official list of known open-source licenses. No extra software to install, no network calls, and it doesn't need special system libraries the way some older tools in this space do.

See Comparison to Alternatives for how this differs from pip-licenses, licensecheck, liccheck, and ScanCode Toolkit in practice.

Speed

On a 425-package real-world environment (data science + web + cloud + ML stack, full transitive dependency trees — see Performance for exactly what's in it), trustedlicenses comes out fastest of the tools tested, despite doing genuine text-matching work for the ~23% of packages with no usable declared metadata:

That speed isn't free or automatic: without releasing Python's GIL during each Rust text-matching scan and without running scans in parallel, the same fallback work takes 7.7–8.9s on this same environment — roughly 6x slower. Instead, the fallback scans run concurrently across a thread pool, and the underlying Rust matcher releases the GIL for the duration of each scan, so independent per-package work actually runs on multiple cores rather than serializing behind Python's interpreter lock. See Performance for the full breakdown, methodology, and why liccheck couldn't be measured at all.

Legal disclaimer

trustedlicenses is not a lawyer and does not provide legal advice. Its output — which license a package resolves to, which category that falls into, and whether a package passes your configured policy — is a best-effort technical signal, not a legal opinion. It can be wrong: a package's declared metadata can be inaccurate or absent, and the text-matching fallback is a similarity match with a real, disclosed false-negative/false-positive tradeoff (see Usage Guide § confidence threshold for a concrete case where this matters). Do not rely on trustedlicenses's output as a substitute for review by a qualified professional before making a legal or license- compliance decision. Use of this software is entirely at your own risk — see LICENSE for the full disclaimer of warranty.

See also: en.wikipedia.org/wiki/IANAL.

Status

Experimental — API and config format are not yet stable.