udpbus 0.3.0

Simple UDP Message Bus with CBOR Array Protocol

UDPBus

UDPBus provides distributed communication for sensors, controllers, and processors across platforms from ESP32 microcontrollers to desktop applications. Nodes discover each other automatically via UDP multicast and exchange messages using topic-based subscriptions, eliminating the need for brokers or configuration files.

UDPBus trades efficiency for guaranteed delivery, enabling it to scale from low-bandwidth sensor applications to high-throughput data streams while maintaining low latency. Message reliability is typically achieved in application code using resend-until-acknowledged patterns where needed. The protocol uses pure CBOR arrays over UDP with automatic message chunking for larger payloads, providing cross-platform compatibility from embedded systems to desktop applications.

Quick Start

# use uv for venv setup, but pip works too
uv init udpbus-helloworld
cd udpbus-helloworld
uv add udpbus

Python Publisher

from udpbus import UDPBus

sensor = UDPBus("temperature_sensor")
sensor.run(blocking=False)
sensor.publish("sensor/temperature", [23.5, "celsius", 1634567890])

Python Subscriber

from udpbus import UDPBus

def handle_temperature(header, payload):
    temp, unit, timestamp = payload[0], payload[1], payload[2]
    print(f"Temperature: {temp}°{unit}")

controller = UDPBus("temperature_controller")
controller.subscribe("sensor/temperature", handle_temperature)
controller.run()

ESP32/Arduino

#include "udpbus.h"

UDPBus bus("sensor_node");

void setup() {
    bus.begin();
    
    bus.subscribe("actuator/led", [](CBORArray& header, CBORArray& payload) {
        bool state = (bool)payload[0];
        int brightness = (int)payload[1];
        digitalWrite(LED_PIN, state);
    });
}

void loop() {
    CBORArray data;
    data.append(25.3f);
    data.append("celsius");
    bus.publish("sensor/temperature", data);
    
    bus.loop();
    delay(5000);
}

Core Features

Zero Configuration

• Automatic discovery: Nodes find each other via UDP multicast (239.255.42.99:4299)
• No brokers: Direct peer-to-peer communication
• No setup: Works immediately on local networks

Message Protocol

• CBOR arrays: Binary-efficient serialization over UDP
• Message format: [sequence_id, topic, type, payload...]
• Size limit: 512 bytes per packet (Internet-safe UDP)
• Automatic chunking: Large messages split and reassembled transparently

Cross-Platform Support

• Python: Linux, macOS, Raspberry Pi (cbor2 library included)
• C++: Header-only implementation with nlohmann/json
• Arduino/ESP32: YACL CBOR library integration

Topic-Based Routing

• Exact matching: sensor/temperature, actuator/led
• Wildcard patterns: sensor/*, */temperature, */*
• Targeted delivery: Messages sent only to interested subscribers

Architecture

Discovery Protocol

Nodes announce themselves with adaptive intervals:

• 0 peers: 2-second intervals (fast discovery)
• 1-2 peers: 3-second intervals
• 3-9 peers: 5-second intervals
• 10+ peers: 10-second intervals (reduced network load)

Discovery announcements include subscribed and published topics for efficient routing.

Message Integrity

• Regular messages: Simple sequence counters, best-effort delivery
• Chunked messages: Full sequence validation with duplicate detection
• Error handling: Malformed packets dropped silently
• Peer timeout: 30-second automatic cleanup

Network Efficiency

• Targeted unicast: Publishers check subscriber interests before sending
• Minimal overhead: Pure CBOR payload, minimal protocol headers
• Adaptive discovery: Network load adapts to deployment size

Advanced Usage

Wildcard Subscriptions

# Subscribe to all sensor data
bus.subscribe("sensor/*", handle_all_sensors)

# Subscribe to temperature from any source  
bus.subscribe("*/temperature", handle_temperature)

# Universal logger
bus.subscribe("*/*", log_all_messages)

Manual Configuration

# Disable discovery for static deployments
bus = UDPBus("node", enable_discovery=False)

# Add known peers manually
bus.add_manual_peer("192.168.1.100", 4300, ["sensor/*"])

Large Message Handling

# Messages >512 bytes automatically chunked
large_data = generate_sensor_array(1000)  # Creates >512 byte message
bus.publish("sensor/bulk_data", large_data)  # Transparently chunked

# Receiver gets complete reassembled message
def handle_bulk_data(header, payload):
    # payload contains complete reconstructed data
    process_large_dataset(payload)

JSON Configuration

# Load network topology from file
bus = UDPBus("node", config_file="network_config.json")

Message Format Compatibility

Arduino-Compatible (Flat Arrays)

# ESP32 can parse efficiently
[42, "sensor/env", 0, 23.5, 65.2, 1013.25]  # temp, humidity, pressure

Python/C++ Enhanced (Nested Structures)

# Full CBOR support
[43, "sensor/complex", 0, 
 {"temperature": 23.5, "humidity": 65.2}, 
 ["status", "calibrated"]]

Performance Characteristics

Throughput

• Python: >1000 messages/second
• C++: >2000 messages/second
• ESP32: >500 messages/second
• Cross-language: <10ms latency

Memory Usage

• Base overhead: ~200 bytes per node
• Per peer: ~100 bytes
• Message overhead: ~50 bytes CBOR structure

Network Load

• Discovery: 100-200 bytes per announcement
• Messages: Only sent to interested peers
• Chunking: ~49 bytes overhead per 463-byte chunk

Testing

Comprehensive test suite validates protocol compliance:

cd tests/
python3 run_tests.py

# Categories
python3 run_tests.py --category protocol      # CBOR compliance, constants
python3 run_tests.py --category communication # Pub/sub, discovery  
python3 run_tests.py --category chunking      # Large message handling
python3 run_tests.py --category performance   # Latency, throughput
python3 run_tests.py --category integration   # Multi-node scenarios

Test Coverage:

• Protocol compliance and message validation
• Cross-language interoperability (Python ↔ C++)
• Chunking integrity with sequence validation
• Discovery scaling and wildcard matching
• Real-world multi-node ecosystems

Use Cases

IoT Sensor Networks

# Temperature sensor (ESP32)
sensor = UDPBus("kitchen_sensor")
sensor.publish("home/kitchen/temperature", [22.5, "celsius"])

# HVAC controller (Raspberry Pi)  
controller = UDPBus("hvac_controller")
controller.subscribe("home/*/temperature", control_hvac)

Robotics Control Systems

# IMU sensor node
imu = UDPBus("imu_sensor")
imu.publish("robot/imu", [accel_x, accel_y, accel_z, gyro_x, gyro_y, gyro_z])

# Motor controller node
motors = UDPBus("motor_controller")
motors.subscribe("robot/imu", calculate_motor_commands)
motors.publish("robot/motors", [left_speed, right_speed])

Industrial Monitoring

# Data logger (collects all messages)
logger = UDPBus("central_logger")
logger.subscribe("*/*", log_all_data)

# Machine sensors
machine_a = UDPBus("machine_a")
machine_a.publish("factory/machine_a/status", ["running", 85.2, "ok"])

Requirements

Python Implementation

• Python 3.7+
• Included cbor2 library (no external dependencies)
• UDP multicast support (standard on most systems)

C++ Implementation

• C++17 compatible compiler
• nlohmann/json header (included)
• POSIX sockets (Linux/macOS/Unix)

Arduino/ESP32 Implementation

• Arduino IDE or PlatformIO
• AsyncUDP library (ESP32)
• YACL CBOR library
• WiFi connection for multicast

Installation

Python

Using udpbus in your project:

uv add udpbus

Developing udpbus itself:

git clone https://github.com/noema/udpbus.git
cd udpbus
uv sync  # Creates venv, installs deps, links udpbus in editable mode
uv run examples/hello_world.py  # Run examples

C++

# Header-only - copy cpp/udpbus.hpp
cp cpp/udpbus.hpp /path/to/your/project/

Arduino/ESP32

# Copy arduino/udpbus.h to your Arduino libraries
cp arduino/udpbus.h ~/Arduino/libraries/

Documentation

• docs/message-format.md - CBOR array structure and platform compatibility
• docs/node-discovery.md - Multicast discovery protocol specification
• docs/topic-subscription.md - Subscription matching and wildcard patterns
• docs/chunking-integrity.md - Large message handling and sequence validation
• tests/README.md - Comprehensive testing framework documentation

Design Decisions

UDP over TCP

UDP provides lower latency and simpler implementation for sensor data and control commands. Packet loss is acceptable for most IoT use cases where latest values matter more than guaranteed delivery.

CBOR over JSON

CBOR offers smaller message size (~38% reduction) and faster parsing, crucial for embedded systems with limited resources.

Multicast Discovery

Eliminates need for centralized brokers or configuration files. Nodes automatically find each other within seconds of network connection.

Targeted Unicast

Unlike broadcast systems, messages are sent only to interested subscribers, reducing network congestion and improving battery life for wireless nodes.

Sequence-Based Integrity

Simple increment counters provide duplicate detection for chunked messages while maintaining minimal overhead for regular sensor data.

License

MIT License - see LICENSE file for details.

Contributing

This is a focused, production-ready implementation. For issues or feature requests, please ensure they align with the core design principles of simplicity, performance, and broad compatibility.