unitree-g1-sim 0.1.0

Hardware-free development sandbox for the Unitree G1 (29-DOF) humanoid robot

unitree-g1-sim

Hardware-free development sandbox for the Unitree G1 (29-DOF) humanoid robot. No MuJoCo. No Isaac Sim. No ROS. No hardware. Just pip install and go.

Why?

Want to build a control panel, telemetry dashboard, fault detection algorithm, or CI pipeline for the G1 — but don't have the robot sitting next to you? This gives you a realistic, deterministic sandbox that behaves like a real G1 without touching hardware.

It's not a physics simulator (it won't tell you if the robot will fall over). It's a development sandbox: realistic joint kinematics, IMU noise, battery drain, thermal behavior, and injectable faults — enough to develop, test, and demo the entire software stack without a $160K robot.

Install

pip install unitree-g1-sim

The only dependency is numpy. No GPU required.

Quick Start

import asyncio
from unitree_g1_sim import G1Simulator, RobotState, FaultType

async def main():
    sim = G1Simulator(seed=42)   # seed for reproducibility

    await sim.connect()           # OFFLINE → STANDBY
    sim.set_state(RobotState.STANDING)

    # Read telemetry
    tele = sim.get_telemetry()
    print(f"Joints: {len(tele.joints)}")
    print(f"IMU roll: {tele.imu.roll:.5f} rad")
    print(f"Battery: {tele.power.soc:.1f}%")

    # Inject a fault
    sim.inject_fault(FaultType.JOINT_OVERTEMP)

    await sim.disconnect()

asyncio.run(main())

Features

• 29 joints with realistic kinematics and hardware limits
• IMU simulation (accel, gyro) with state-dependent noise models
• Battery model with Coulomb counting and voltage sag
• Thermal model with load-based heating and natural cooling
• Fault injection: joint overtemperature, position error, IMU drift, low battery, comm timeout
• Seedable randomness for deterministic, reproducible telemetry
• 5 built-in diagnostic tests (TC-001 to TC-005: ROM, temp, IMU, stability, power)
• Async-first API for integration with asyncio applications

Built-in Diagnostic Tests

from unitree_g1_sim import G1Simulator
from unitree_g1_sim.builtin_tests import TEST_CATALOG

sim = G1Simulator(seed=42)
await sim.connect()

for tc_id, entry in TEST_CATALOG.items():
    result = await entry["fn"](sim)
    print(f"{result.status}  {result.test_name}: {result.summary}")

ID	Name	Category
TC-001	Joint Range of Motion	Mechanics
TC-002	Joint Temperature	Thermal
TC-003	IMU Calibration	Sensors
TC-004	Standing Stability	Control
TC-005	Power Consumption	Power

API Reference

G1Simulator(seed: int | None = None)

The main simulator class.

Method	Description
await connect()	OFFLINE → STANDBY
await disconnect()	Return to OFFLINE
set_state(state)	Set RobotState (STANDING, WALKING, TESTING, ...)
get_telemetry()	Generate one RobotTelemetry frame
inject_fault(fault)	Activate a FaultType
clear_faults()	Remove all faults

Data Models

• RobotTelemetry — timestamp, state, joints, imu, power, active_faults, uptime
• JointTelemetry — name, position, velocity, torque, temperature, error_code
• IMUTelemetry — roll, pitch, yaw, gyro_, accel_
• PowerTelemetry — voltage, current, soc (%), power_w

Enums

• RobotState — OFFLINE, INITIALIZING, STANDBY, STANDING, WALKING, TESTING, FAULT, E_STOP
• FaultType — NONE, JOINT_OVERTEMP, JOINT_POSITION_ERROR, IMU_DRIFT, LOW_BATTERY, COMM_TIMEOUT

Config

• G1_JOINTS — list of 29 joint definitions (name, id, limits, max_velocity, max_torque, group)
• G1_SPECS — dict of hardware specs (height, weight, battery, temp limits, etc.)

License

Apache 2.0 — see LICENSE.

Related

• Unitree Robotics — official G1 repos