usmp 0.2.0

USMP — Unified Secure Multi-transport Protocol. Secure, encrypted device communication for ESP32, Arduino and IoT.

USMP — Unified Secure Multi-transport Protocol

Secure, encrypted communication for ESP32, Arduino, and IoT devices.

USMP sits between raw TCP (no security) and full TLS (too heavy for microcontrollers) — giving any constrained device a fully encrypted, mutually authenticated session in three function calls.

pip install usmp

What it gives you

• Mutual authentication — both device and server verify each other via HMAC-SHA256 + PSK
• Forward secrecy — X25519 ephemeral key exchange, new keys every session
• Encryption — AES-256-GCM, mandatory, no plaintext mode
• Replay protection — monotonic sequence numbers

Quickstart

Server

import asyncio
from usmp import USMPServer, USMPSession, ConnectionClosedError

server = USMPServer(host="0.0.0.0", port=9000, psk=b"your-psk-here")

@server.on_session
async def handle(session: USMPSession):
    print(f"Device connected: {session.device_id}")
    try:
        while True:
            data = await session.recv()
            print(f"RX: {data}")
            await session.send(b"got it")
    except ConnectionClosedError:
        print(f"Device disconnected: {session.device_id}")

asyncio.run(server.serve())

Client (Python)

import asyncio
from usmp import USMPClient, ConnectionClosedError

async def main():
    client = USMPClient(host="127.0.0.1", port=9000, psk=b"your-psk-here")
    async with client.connect() as session:
        await session.send(b"hello")
        reply = await session.recv()
        print(f"RX: {reply}")

asyncio.run(main())

Client (ESP32 / Arduino)

#include <USMP.h>

USMPClient usmp("your-psk-here");

void setup() {
    usmp.begin(USMP::TCP("192.168.1.100").wifi("SSID", "password"));
    usmp.send("hello from esp32");
}

void loop() {
    usmp.maintain(); // keepalive + reconnect

    if (usmp.available()) {
        Serial.println(usmp.read());
    }
}

Protocol overview

Device                        Server
  |                              |
  |-- HELLO (device_id, pub_C) -->|
  |<- CHALLENGE (nonce, pub_S) ---|
  |-- HELLO_ACK (HMAC) ---------->|
  |<- SESSION_OK (session_id) ----|
  |                              |
  |== AES-256-GCM encrypted ======|

4-step handshake, then every frame is AES-256-GCM encrypted with a session key derived via X25519 + HKDF-SHA256.

Installation

pip install usmp

Requires Python 3.11+.

ESP32 / Arduino library

The Arduino library and ESP-IDF component are available at github.com/MetaLoomLabs/usmp.