via-lighting-api-osfix 0.2.1

OS fix to the original package. This Python API provides an interface for controlling the RGB lighting of keyboards that support the VIA protocol. It allows you to dynamically change the brightness, effect, effect speed, and color of the lighting.

via-lighting-api

This is an extended version of the via-lighting-api package that adds support for different operating systems. Key change is designed to make Windows machines work due to the HID protocol for VIA being different in Windows compared to e.g. Linux (issues showing this behaviour available here and here). Original package is available here.

This Python API provides an interface for controlling the RGB lighting of keyboards that support the VIA protocol. It allows you to dynamically change the brightness, effect, effect speed, and color of the lighting.

Features

• Set lighting brightness
• Set lighting effect
• Set lighting effect speed
• Set lighting color in RGB or HSV format (HS only)
• Set absolute lighting color (real RGB color instead of HS only)
• Color correction algorithm allows to display accurate colors
• Save lighting settings to EEPROM

Requirements

• Python 3.x

Installation

pip install via-lighting-api

Usage

See a full example code in example.py.

Init

First, import the ViaLightingAPI class from the module where it’s defined:

from via_lighting_api import ViaLightingAPI

To initialize the API and control the lighting, you need to know the Vendor ID (VID) and Product ID (PID) of your keyboard. If you don't know these values, run: via-lighting-api --list-devices and follow the hint to find them.

# Replace with your keyboard's VID and PID
vid = 0x1234
pid = 0xABCD

# Initialize the API
api = ViaLightingAPI(vid, pid)

Set Brightness

# Set brightness to maximum
api.set_brightness(255)

Set Effect

# Set effect to 'Rainbow Moving Chevron'
api.set_effect(15)

Set Effect Speed

# Set effect speed to medium
api.set_effect_speed(127)

Set Color

# Set color to red (in RGB)
api.set_color([255, 0, 0])

# Set color to blue (in HSV)
api.set_color([170, 255])

Set Absolute Color

Set absolute lighting color (adjust both HS color and brightness), RGB format supported.

The effect will be better only if your keyboard switch has a light-guiding design or the color saturation of the switch is low, because the color displayed will be greatly biased towards the color of the switch when the light brightness is low.

If not, try out the color correction function.

# Set absolute color to purple
api.set_color_abs([128, 0, 128])

Color Correction

This is useful when your keyboard switches do not have light guide designs, or they have highly saturated colors, and you want them to display accurate colors.

To use it, you first need to test the RGB values of the light settings when your keyboard displays true white.

This algorithm only applies to set_color_abs()

# Enable color correction
api.set_color_correction([150, 240, 60])
# Disable color correction
api.disable_color_correction()

Save Settings

# Save current lighting settings to EEPROM
api.save()

Troubleshooting

If your device is not detected, ensure that it is connected properly and that you have the correct VID and PID. Also, check that your keyboard firmware supports VIA control.

Disclaimer

This API provides an interface that can send user-defined commands directly to your device, which may cause unexpected results if used improperly. Make sure you fully understand the VIA protocol and the commands you are sending.

License

This API is open-source and can be used and modified by anyone. Please respect the original author’s work when using or distributing this software.