Skip to main content

vpstream

On-demand video streaming from a VPS. The public port is open only while a stream runs, and everything is controlled over SSH or a dashboard on your tailnet (or, if you choose, a public dashboard over HTTPS behind a password).

Status: early development. Streams a file or a folder as it is, for players such as VLC and mpv (direct mode), or as prepared HLS versions with a player page for TV browsers (browser mode).

Install

Needs Linux, Python 3.12+, Caddy (2.10 or newer for HTTPS streams: vpstream install caddy), ufw, systemd, and Tailscale with HTTPS certificates (not needed for a public dashboard). ffmpeg is used by browser mode, bench and caps; mkvtoolnix and the acl package are optional (see below). vpstream doctor checks all of it and prints the fix for anything missing.

sudo PIPX_HOME=/opt/pipx PIPX_BIN_DIR=/usr/local/bin pipx install "vpstream[dev]"
vpstream doctor
sudo vpstream init

The install must be system-wide (the service runs as its own user). Upgrade with the same prefix and pipx upgrade vpstream, then sudo vpstream init again.

Commands

Command What it does
vpstream start --file F / --dir D Starts a stream of one video, or of a folder's videos
vpstream ls [FOLDER] Lists a folder's videos (default [media] folder, /srv/media), their tracks and what is prepared
vpstream track-info FILE Lists a file's tracks with the numbers --sub and --audio take
vpstream prepare --file F / --dir D Makes the versions browser mode plays (--sub 1,3, eng, none)
vpstream prepared [rm PATH | --stale | --all | cancel [PATH]] Lists, removes or cancels prepared versions
vpstream stop / status Stops the stream, or shows its addresses and state
vpstream devices [enable|disable DEVICE | lock | unlock] Who asked for the stream, and who gets in (a device is an address, or a browser's id)
vpstream clients [set DEVICE... | --all] Browser mode: where each browser is, and --audio, --sub, --seek, --start-at, --name for them
vpstream alias NAME Changes the short name in the address
vpstream revoke Takes back file access a stream that ended by itself left behind
vpstream doctor Checks this host
sudo vpstream init / uninstall Sets the service up, or removes it (--purge also the cache)
sudo vpstream init --no-tailscale / --tailscale Puts the dashboard on the internet behind a password, or back on the tailnet
sudo vpstream init --https / --no-https Serves streams over HTTPS with a Let's Encrypt certificate for the address, or over plain HTTP again
sudo vpstream dash-pass Sets a new password for the public dashboard (logs every browser out; a stream goes on)
vpstream dash-unblock Forgets the public dashboard's failed logins, to log in from a new browser
vpstream dashboard-cert Prints the public dashboard's certificate authority, to install on your phone
vpstream bench FILE Measures how fast this host copies, transcodes and burns in subtitles
vpstream caps Serves a page that tests what a TV browser can play
vpstream install ffmpeg / update ffmpeg Installs or updates a current static ffmpeg build
vpstream install caddy / update caddy Installs or updates the newest Caddy from Caddy's own apt repository (Debian, Ubuntu, Raspbian)
vpstream selftest [--integration] Runs the tests shipped with the package

Streaming

vpstream start --file /srv/media/film.mkv            # http://<ip>:1337/abc
vpstream start --dir /srv/media/show --alias show    # /show (index or playlist), /show/1, /show/2 ...
vpstream stop
  • Addresses: /ALIAS plays a --file stream. For --dir it is an episode list in a browser and an M3U playlist in a player; videos are numbered in natural order of their names.
  • Who gets in: --policy open (default; disable single addresses), approval (only those you approve; others wait, marked WL) or locked (only enabled ones). Change it live with vpstream devices or the dashboard. An address that tries 20 wrong paths is shut out.
  • Time limit: --ttl MINUTES, default 180, 0 for none.
  • Your files: the service reads videos as its own user. If it cannot, start gives it read access with an ACL entry for that user alone (needs the acl package and you owning the files); stop takes it back. A browser stream of a prepared video plays only what was prepared, so it needs no access: the dashboard can start it for any file you prepared.
  • Seeking: MKV files whose seek index has no audio entries (most of them) make VLC for Android resume by reading from the start. vpstream serves such a file from a copy with a full index, made once with mkvmerge (no re-encoding, about a minute per GB) and kept in /var/cache/vpstream/index; until it is ready the address says to try again. Without mkvtoolnix the file is served as it is.
  • Safety: Caddy runs only while a stream does and asks the daemon about every request. Stop, the time limit and stopping the service close the port; after a crash the stream is taken up again, never after a reboot. The stream is plain HTTP.

Browser mode

vpstream track-info /srv/media/film.mkv                   # tracks, and how each is prepared
vpstream prepare --file /srv/media/film.mkv --sub 1,3     # base version and two subtitle tracks
vpstream start --file /srv/media/film.mkv --mode browser --audio eng --sub 1
  • Versions: the base copies the video when browsers play it (H.264 8-bit, HEVC, AV1), else transcodes it to H.264 at its own size; every audio track becomes an AAC alternate. Plain text subtitles (SRT, mov_text, WebVTT) become soft WebVTT; image, ASS and SSA tracks get a burned-in version, one full encode each. Without --sub, every plain text track is prepared and nothing is burned in. A prepare runs in the service at low priority, one job after the other, and asks first when it would take longer than the film (--yes).
  • Start: a missing base version is made by start itself when it is a copy (minutes); a transcode is asked about first. Until it is ready the address says how far it got.
  • Dashboard: shows the plan of a prepare (what it makes, how long, the tracks it found) before it is queued, then its progress.
  • Player: large buttons for a TV remote that works as a pointer: play, ±10 s, audio (each track, then Off), subtitles (Off, then each prepared one), episodes, next, full screen (also the f key on a computer) and hide. Other players get the HLS playlist at the same address.
  • Who gets in: approval by default; a waiting browser shows a 4-digit code, which vpstream devices and the dashboard show next to its address. A browser gets a random cookie on its first page and is known by it, so an approved TV stays approved when its address changes, and a stranger behind the same address waits. Players such as VLC are known by their address. A stop forgets every cookie.
  • Viewers: each browser's player reports where it is every 2 seconds. On the dashboard's Viewers tab (or vpstream clients) you tick one or more and set the audio, the subtitles, a seek now, where the next load starts, or a name. Reopening a video continues where that browser left off. A button pressed on the TV while a command is on its way wins.
  • Cache: /var/cache/vpstream/prepared, kept until vpstream prepared rm. A changed file is prepared again; its old versions are listed as stale.

Configuration

/etc/vpstream/config.toml: port (1337) and host (the address shown in URLs) under [stream], port (1338) under [dashboard], and copy_speed and encode_speed under [prepare] for the time estimates (vpstream bench FILE prints the values for this host), and folder under [media], the folder vpstream ls lists by default (/srv/media). Restart the service after a change.

The dashboard listens on 127.0.0.1 and init publishes it with tailscale serve at https://<tailnet name>:1338/. The stream port is opened and closed by a small root helper, vpstream-fw, which only runs ufw allow / ufw delete allow for that one port.

Public dashboard

sudo vpstream init --no-tailscale asks for a password (or takes --dash-pass-file FILE, or --dash-pass, which stays in shell history) and puts the dashboard on the internet at https://<ip>:1338/, through a Caddy of its own with a certificate from a local authority (tls internal). Only a salted PBKDF2 verifier of the password is kept, in /etc/vpstream/dashboard.key (readable by root and the service's group only).

  • Certificate: what Caddy serves lasts 12 hours and renews itself, so init prints the authority's SHA-256 instead. Install the authority on your phone once, before the first login (vpstream dashboard-cert > vpstream-ca.crt; Android: Settings, Security, Install a certificate, CA certificate) and the browser trusts the dashboard with no warning. Each public address, IPv4 and IPv6, gets a certificate of its own.
  • Login: challenge-response. The page derives a key from the password (WebCrypto, or plain JavaScript where the page has none) and answers a one-time nonce with an HMAC of it; the password never crosses the wire and a captured answer cannot be used again. That protects against someone who only listens. Before the authority is installed, someone who can change the traffic could serve a fake login page, so install it first.
  • Session: a __Host- cookie (HTTPS only, HttpOnly, SameSite=Strict) for 12 hours, a CSRF token on every change, and Log out. A restart of the service logs everyone out.
  • Limits: 5 wrong passwords from one address (one /64 for IPv6) in 15 minutes, or 50 from all addresses in an hour, and logins wait. A browser that logged in before keeps a signed device cookie (a year) and is counted on its own, so guessing from elsewhere does not lock it out. The count survives restarts; vpstream dash-unblock and dash-pass clear it.
  • Firewall: the service opens the dashboard port in ufw while it serves it, and closes it on stop, crash or reboot. Open it in your provider's firewall too, if it has one.
  • The command line keeps talking to the daemon over its socket, with no password. sudo vpstream init --tailscale goes back: the password is removed and the port closed.

HTTPS for streams

sudo vpstream init --https serves streams at https://<ip>:1337/ALIAS with a Let's Encrypt certificate for the IPv4 address (the shortlived profile: 160 hours). It needs Caddy 2.10 or newer, for ACME profiles; Ubuntu 24.04 has 2.6.2, so run vpstream install caddy first.

  • One certificate, kept: a stream that starts uses the kept certificate when it lasts past the stream's end; otherwise a new one is requested then, before the stream starts, by a Caddy of its own that stops as soon as it has it or fails. Let's Encrypt allows 5 for the same address a week, so nothing is asked again while one lasts. Nothing changes while a stream runs, so an HTTPS stream runs at most 156 hours (--ttl). init keeps the certificate; uninstall removes it.
  • Port 80: Let's Encrypt checks the address on port 80. The service opens it in ufw only while a certificate is requested, and closes it after (also on stop, crash or reboot); a rule that was there before stays. Let 80/tcp in your provider's firewall too.
  • When the request fails (port 80 blocked, a rate limit), the stream does not start and says why. vpstream start --http ... (or "Plain HTTP this time" on the dashboard) starts that one stream over plain HTTP.
  • Cookie: over HTTPS the approval cookie is Secure.
  • Trying it out: [acme] ca sets another authority, such as Let's Encrypt's staging server or a local Pebble (with ca_root and port), so no real limit is spent.

Development

python -m venv .venv && .venv/bin/pip install -e ".[dev]"
.venv/bin/pytest [--integration]
git config core.hooksPath .githooks

Pull request titles are Conventional Commits; releases are made from main by python-semantic-release. hls.js (Apache-2.0) is bundled; scripts/update-hlsjs.py updates it.

License

MIT

Metadata

Release files for vpstream 0.14.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for vpstream 0.14.0
File Size Uploaded Provenance Actions
vpstream-0.14.0.tar.gz 564.0 kB With provenance Details for vpstream-0.14.0.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for vpstream 0.14.0
File Interpreter ABI Platform Actions
vpstream-0.14.0-py3-none-any.whl Python 3 none any Details for vpstream-0.14.0-py3-none-any.whl

Total release size: 1.2 MB

Release files / vpstream-0.14.0.tar.gz

Download URL vpstream-0.14.0.tar.gz
Size 564.0 kB
Tags Source
SHA-256 checksum
How to use checksums
a12b50115f8c9612c41b807719248633e69aaef7c0f8658adaa50df7316faceb
BLAKE2b-256 checksum
How to use checksums
9c0e9072fc971ea7a64a81a7afb9f480d785af6a5036fff1b36572798b307d41
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / vpstream-0.14.0-py3-none-any.whl

Download URL vpstream-0.14.0-py3-none-any.whl
Size 621.1 kB
Tags Python 3
SHA-256 checksum
How to use checksums
f64fa6b20694569f32d4222e6fdd2946437ab0a303e4b90ef83b2831f9842f38
BLAKE2b-256 checksum
How to use checksums
d4a3cdf0aa3f28273226df3fbd2c338339012dad8f6adda73030b6e2bbcdc18a
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Security for vpstream 0.14.0

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

Both files in this release have been uploaded with provenance metadata.

Select from 2 files

Attestation for vpstream-0.14.0.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Release history Release notifications | RSS feed

This release

0.14.0 This release

2 release files Full provenance

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page