wakemypc 1.2.3

Companion CLI for https://wakemypc.com (WakeMyPC) -- flash, provision, and manage Pico W transmitters from your terminal. WakeMyPC is a website that lets you turn on you PC remotely from anywhere in the world using Wake-on-Lan.

WakeMyPC

Companion CLI for wakemypc.com.

Runs on your computer, talks to a Pi Pico W (or W 2) over USB, and your wakemypc.com account over HTTPS.

Install

Create a virtual environment, if you want.

python -m venv .venv

Activate virtual environment.

source .venv/bin/activate #linux/MacOS
.venv\Scripts\Activate.bat #Command prompt
.\.venv\Scripts\Activate.ps1 #Powershell

Use pip to install:

pip install wakemypc

Verify:

wakemypc --help

On Linux you may need to add yourself to the dialout group so you can talk to the Pico's serial port without sudo:

sudo usermod -a -G dialout $USER
# log out and back in

What it does

wakemypc detect           # list connected Picos (flashed and BOOTSEL-mode)
wakemypc flash --uf2 …    # write MicroPython firmware to a BOOTSEL Pico
wakemypc upload …         # copy wakemypc-firmware .py files onto the Pico
wakemypc provision …      # write WiFi creds + server URL to secrets.json
wakemypc register …       # register with the server, get a device token
wakemypc restart          # soft-reboot the Pico (or reboot into BOOTSEL)
wakemypc identify         # blink the Pico's LED to find it physically usefull when multiple pico(s) connected
wakemypc status           # read WiFi state + secrets summary over USB
wakemypc logs             # Read logs from Pico over USB serial connection 

wakemypc --help and wakemypc <subcommand> --help have the full reference.

First Setup

The most common flow for a brand new Pico is:

# 1) Plug Pico in BOOTSEL mode (hold BOOTSEL while connecting USB).
wakemypc detect
wakemypc flash --uf2 RPI_PICO2_W-…uf2

# 2) Plug the now-flashed Pico to upload latest firmware from GitHub.
wakemypc upload --github

# 3) Configure WiFi + server.
wakemypc provision --add-new-wifi --wifi-ssid HomeWiFi --wifi-pass mypassword

# 4) Register on wakemypc.com using browser login
wakemypc register --oauth --name "My Pico"

Auth Token registeration (Manual)

Register the token offline when

• You obtained the auth token by manually registering Pico device on dashboard

wakemypc register --token <Token>

This doesn't require any username or password. The Pico will automatically communicate with the server if the Pico is registered on Transmitters on the dashboard.

Token rotation

In the event that you'd like to rotate the auth token used while authenticating with the server.

Two modes:

wakemypc register --username … --password … --rotate   # rotate existing
wakemypc register --token <T>                                                          # offline, no server call

--rotate calls the server's rotate-token endpoint and writes the new token to the Pico in one step.

--token <T> skips the server -- handy when you've already rotated through the dashboard and just need to push the new token over USB.

What this CLI does NOT do

• It does not need root / sudo (apart from the one-time dialout group add on Linux).
• It does not support Pico Token registeration through dashboard yet. The only network calls go to the api url with username and passwordthat you pass to register.
• It does not store your password. Login uses the JWT the api server returns; the password is forwarded once and then forgotten.

License

Source-available, non-commercial. PolyForm Noncommercial 1.0.0.

You can run it, audit it, modify it, and share patches. You can't sell it or run a paid service on top of it. Patches welcome.