Pre-release

This release is a pre-release and may not be stable for production use.

wisent-wire-mcp

MCP (Model Context Protocol) server for the Wisent Wire hardware testing platform. Lets AI assistants interact with WisentWire devices — power control, firmware flashing & flasher catalog, UART / RS485 / CAN buses, GPIO control & telemetry, GDB debug sessions, device registry, reservations, and protocol frame definitions.

Installation

Requires Python 3.10+. Install with pipx — it puts the MCP server in an isolated environment and adds the wisent-wire-mcp binary to your PATH.

1. Install `pipx` (one-time)

# macOS
brew install pipx
pipx ensurepath

# Linux / WSL
python3 -m pip install --user pipx
python3 -m pipx ensurepath

Open a new terminal so the updated PATH is picked up.

2. Install the MCP server

pipx install wisent-wire-mcp

Verify:

which wisent-wire-mcp         # ~/.local/bin/wisent-wire-mcp (or similar)

3. Upgrade / uninstall

pipx upgrade   wisent-wire-mcp
pipx uninstall wisent-wire-mcp

Configuration

`.mcp.json` location

Claude Code reads MCP servers from .mcp.json. Two scopes:

Scope	Path	When to use
Project	`<repo-root>/.mcp.json`	Shared with the project (checked into VCS or per-repo)
User	`~/.claude.json` under the `mcpServers` key	Available in every Claude Code session for this user

Claude Desktop uses a separate file:

Platform	Path
macOS	`~/Library/Application Support/Claude/claude_desktop_config.json`
Windows	`%APPDATA%\Claude\claude_desktop_config.json`
Linux	`~/.config/Claude/claude_desktop_config.json`

Example `.mcp.json`

{
  "mcpServers": {
    "wisent-wire": {
      "command": "wisent-wire-mcp",
      "env": {
        "WISENT_WIRE_URL": "https://app.wisent-wire.com",
        "WISENT_WIRE_EMAIL": "user@company.com",
        "WISENT_WIRE_PASSWORD": "..."
      }
    }
  }
}

After editing .mcp.json, restart Claude Code (or reload the window) for the server to be picked up.

Environment variables

Variable	Required	Description
`WISENT_WIRE_URL`	No	Explicit API base URL. Overrides `WISENT_WIRE_ENV`.
`WISENT_WIRE_ENV`	No	Target environment: `prod` or `int`. `int` → `https://int.wisent-wire.com`
`WISENT_WIRE_EMAIL`	Yes*	Account email
`WISENT_WIRE_PASSWORD`	Yes*	Account password
`WISENT_WIRE_TOKEN`	Yes*	API token (alternative to email/password)

* Provide either TOKEN or EMAIL + PASSWORD.

Choosing a backend. Precedence is WISENT_WIRE_URL → WISENT_WIRE_ENV → production default (https://app.wisent-wire.com). Set neither and you get production. To point at integration, no URL needed:

"env": {
  "WISENT_WIRE_ENV": "int",
  "WISENT_WIRE_TOKEN": "..."
}

Available tools

57 tools, grouped below.

System & Device

Tool	Description
`get_backend_version`	Get the backend version
`list_wisentwires`	List all WisentWire devices
`get_ww_status`	Get current device status
`check_ww_available`	Check if a device is available
`rename_wisentwire`	Change a device display name — that field only, nothing else

Device Registry

Tool	Description
`list_registered_devices`	List registered devices, optionally filtered by label
`list_connected_devices`	Scan a WisentWire and list physically connected devices
`register_device`	Register a device against a fingerprint

Power & Telemetry

Tool	Description
`power_on` / `power_off`	Control power supply
`update_power_supply`	Change voltage / current limit while powered
`get_telemetry`	Recent voltage/current readings
`set_power_supply_telemetry`	Enable or disable power telemetry streaming

GPIO

Tool	Description
`get_gpio_shadow`	Current GPIO pin states
`get_gpio_names`	Pin name mapping for a device
`set_gpio_output`	Drive an output pin high or low
`set_gpio_input_pull_policy`	Set an input pin's pull policy
`set_gpio_telemetry`	Enable or disable GPIO telemetry streaming
`get_gpio_telemetry`	Recent GPIO telemetry readings

Firmware & Flashing

Tool	Description
`list_firmware`	List firmware binaries with their tag ids
`list_firmware_tags`	List the org firmware tags with the ids `set_firmware_tags` takes
`create_firmware_tag`	Create an org-wide firmware tag
`set_firmware_tags`	Replace all tags on a binary — not additive
`get_firmware_download_url`	Short-lived pre-signed download link for a binary
`upload_firmware`	Upload a firmware binary
`delete_firmware`	Delete a firmware binary
`flash_firmware`	Flash firmware to a device (msp430/openocd/st-link/j-link). `device_id` picks which probe, when more than one is attached
`flash_firmware_file`	One-shot: upload a local firmware file, flash it, then delete it (by default). Also takes `device_id`
`list_launch_commands`	Valid target/programmer/interface/toolchain combinations. Needs at least one filter — unfiltered the catalog is too large for the backend to return
`list_programmers`	Probe types (ST-Link v3, J-Link, ...) with the ids `register_device` needs
`list_targets`	Find flashable chips by name fragment and get the `target_id` `list_launch_commands` needs
`get_flash_status`	Check a flash job's status by job id
`get_flasher_logs`	Get flasher debug logs

Debug

Tool	Description
`get_debug_state`	Get the current GDB debug session state
`get_debug_job_status`	Get a debug job's status by id
`get_debug_logs`	Buffered device-side debug log; the `last_n` most recent entries (default 50)
`stop_debug`	Stop the active debug session

UART & Buses

Tool	Description
`send_uart_command`	Send a text command over UART
`send_uart_hex`	Send raw hex bytes over UART
`send_rs485_hex`	Send raw hex bytes over RS485
`send_can_frame`	Send a CAN frame
`get_uart_log`	Get TX/RX message history
`get_bus_log`	Get TX/RX message history for a given bus (uart/rs485/can)

Frame Definitions

Tool	Description
`list_frame_definitions`	List all frame definitions
`get_frame_definition`	Get a frame definition with fields
`create_frame_definition`	Create a new frame definition
`update_frame_definition`	Update a frame definition
`delete_frame_definition`	Delete a frame definition

Commands

Tool	Description
`list_commands`	List commands for a frame definition
`get_command`	Get one command with the field values bound to it
`create_command`	Create a command
`update_command`	Update a command
`delete_command`	Delete a command

Reservations

Tool	Description
`list_reservations`	List reservations
`get_reservation`	Get a single reservation
`create_reservation`	Create a reservation
`delete_reservation`	Delete a reservation

Development

pip install -e ".[dev]"
pytest tests/ -v
ruff check src/ tests/

License

MIT

Development Status
- 3 - Alpha
Intended Audience
- Developers
Programming Language

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

wisent_wire_mcp-0.9.0rc5.tar.gz (35.2 kB view details)

Uploaded Aug 25, 2026 Source

Built Distribution

If you're not sure about the file name format, learn more about wheel file names.

The dropdown lists show the available interpreters, ABIs, and platforms. Enable javascript to be able to filter the list of wheel files.

wisent_wire_mcp-0.9.0rc5-py3-none-any.whl (28.1 kB view details)

Uploaded Aug 25, 2026 Python 3

File details

Details for the file wisent_wire_mcp-0.9.0rc5.tar.gz.

File metadata

Download URL: wisent_wire_mcp-0.9.0rc5.tar.gz
Upload date: Aug 25, 2026
Size: 35.2 kB
Tags: Source
Uploaded using Trusted Publishing? No
Uploaded via: twine/7.0.0 CPython/3.12.14

File hashes

Hashes for wisent_wire_mcp-0.9.0rc5.tar.gz
Algorithm	Hash digest
SHA256	`2a7fd3668e79f33bbd5f1d9c1fccbb83724e16bef6dc9ac063f5ec1f0e907756`
MD5	`b42536cf7f560b11a7b264ba94c78a66`
BLAKE2b-256	`30d1b555337d10219c77837d544d0abe619776008a03027170584b84fe216649`

See more details on using hashes here.

File details

Details for the file wisent_wire_mcp-0.9.0rc5-py3-none-any.whl.

File metadata

Download URL: wisent_wire_mcp-0.9.0rc5-py3-none-any.whl
Upload date: Aug 25, 2026
Size: 28.1 kB
Tags: Python 3
Uploaded using Trusted Publishing? No
Uploaded via: twine/7.0.0 CPython/3.12.14

File hashes

Hashes for wisent_wire_mcp-0.9.0rc5-py3-none-any.whl
Algorithm	Hash digest
SHA256	`8f4217cfbed61dc4892fd0ac4106881969f4cb3ff8962f41a4b5c5864a0da238`
MD5	`cd82cc38133a11bf0db96f5673e6af37`
BLAKE2b-256	`38e8c331e697d9ae581de5af2bd03e5b12be3779ce02fecdf988f96839319237`