Wisent Wire Python SDK

Python client library for the Wisent Wire hardware testing platform. A single typed client wraps the whole REST API — device control, firmware flashing, on-target debugging, serial and GPIO I/O, telemetry, reservations, and organization management — with automatic auth, typed responses, typed errors, and convenience pollers for asynchronous operations.

Installation

pip install wisent-wire-sdk

Quick start

from wisentwire import WisentWireClient

# API key (recommended — scripts, CI, MCP)
client = WisentWireClient(
    api_key="wwk_...",   # or set the WISENTWIRE_API_KEY env var and omit api_key
)

# Cognito (email + password)
client = WisentWireClient(
    email="user@company.com",
    password="secret",
)

# Pre-existing bearer token
client = WisentWireClient(token="eyJhbGciOi...")

Create an API key from the web app under Settings → API keys. Keys are shown once — store them securely. Default expiry is 1 year; up to 10 active keys per user. Auth resolution precedence: explicit api_key > WISENTWIRE_API_KEY env > token > email + password.

Choosing an environment

base_url is optional and defaults to production. To target a different backend, pass env= instead of typing a URL:

client = WisentWireClient(env="int", api_key="wwk_...")   # target int

Or set it ambiently, so the same script runs against either backend unchanged:

export WISENT_WIRE_ENV=int

Valid env values are prod (https://app.wisent-wire.com) and int (https://int.wisent-wire.com). The value is case-insensitive; an unknown name raises ValueError. An explicit URL still works when you need one:

client = WisentWireClient(base_url="https://app.wisent-wire.com", api_key="wwk_...")

Base-URL resolution precedence:

base_url= > env= > $WISENT_WIRE_URL > $WISENT_WIRE_ENV > production (https://app.wisent-wire.com).

WISENTWIRE_URL / WISENTWIRE_ENV are accepted as aliases, matching the WISENTWIRE_API_KEY spelling. Omitting all of them targets production, as before.

Features

• Wires — list, inspect, create, update, delete wires; configure per-bus communications (UART / RS485 / CAN); check availability.
• Power supply — set state / voltage / current, read the device shadow, toggle and read power telemetry.
• Firmware & flashing — list, upload, and delete firmware; dispatch a flash job, poll its status by id, stream flasher logs.
• Flasher catalog — list programmers, targets, interfaces, toolchains, and the valid launch-command combinations.
• Debug (GDB) — start / stop an on-target GDB server, read live session state, poll the dispatched job by id.
• Console (UART / RS485 / CAN) — send hex or ASCII on a byte-stream bus, send structured CAN frames, read the per-bus console, wait for an RX match.
• GPIO — read the shadow, drive outputs, set input pull policy, name pins, toggle and read input telemetry.
• Device registry — list registered and connected USB devices, register, update and remove devices, trigger a device scan.
• Frame definitions — CRUD for protocol frame definitions and their commands.
• Reservations — list a week's reservations, inspect, create, and delete them.
• Organization — create and read the org, manage members and roles, invitations, and membership requests.
• Account & system — read the authenticated user, check auth, and report the backend version and deployment stage.
• Typed errors & pollers — every non-2xx maps to a WisentWireError subclass; wait_* helpers poll asynchronous jobs with a configurable timeout.

Usage

Wires

wires = client.list_wisentwires()
ww = client.get_wisentwire(ww_id=1)
print(ww.name, ww.is_virtual, ww.status, ww.connected)

# Per-bus communications — one entry per configured bus
from wisentwire import CanCommunications, UartCommunications

client.update_wisentwire(
    ww_id=1,
    name="bench-1",
    communications=[
        UartCommunications(baud_rate=115200),
        CanCommunications(bitrate=500_000, termination=True),
    ],
)
print(ww.uart, ww.can)   # convenience accessors; None when not configured

communications=None keeps the current config; an empty list clears all buses.

Power supply

client.set_power_supply(ww_id=1, state="ON", voltage=5.0, current=2.0)
shadow = client.wait_shadow_state(ww_id=1, expected_state="ON")
print(shadow.reported.voltage_setpoint)

client.set_power_supply_telemetry(ww_id=1, enabled=True)
readings = client.get_power_telemetry(ww_id=1)

Firmware & flashing

# Upload firmware (one call: presigned URL -> S3 -> confirm)
fw = client.upload_firmware("app.bin", firmware_bytes)

# Resolve a valid (target, programmer, interface, toolchain) combination
cmd = client.list_launch_commands()[0]

# Dispatch a flash job and wait for it by job id
dispatch = client.flash(
    ww_id=1,
    firmware_id=fw.id,
    target_id=cmd.target_id,
    programmer_id=cmd.programmer_id,
    interface_id=cmd.interface_id,
    toolchain_id=cmd.toolchain_id,
)
status = client.wait_flash_complete(ww_id=1, job_id=dispatch.job_id)
print(status.status)

for entry in client.get_flasher_logs(ww_id=1):
    print(entry.source, entry.data)

# Manage stored binaries
binaries = client.list_firmware()
client.delete_firmware(firmware_id=fw.id)

upload_firmware wraps the three-step flow; request_upload_url and confirm_firmware are available if you need to drive the S3 PUT yourself.

Debug (GDB)

cmd = client.list_launch_commands()[0]
dispatch = client.start_debug(
    ww_id=1,
    target_id=cmd.target_id,
    programmer_id=cmd.programmer_id,
    interface_id=cmd.interface_id,
    toolchain_id=cmd.toolchain_id,
    port=3333,
)
client.wait_debug_complete(ww_id=1, job_id=dispatch.job_id)

state = client.get_debug_state(ww_id=1)
print(state.active, state.local_ip, state.port)
client.stop_debug(ww_id=1)

Console (UART / RS485 / CAN)

client.send_uart_ascii(ww_id=1, text="HELLO")
msg = client.wait_for_uart_rx(ww_id=1, match_hex="48454C4C4F")
print(msg.direction, msg.protocol, msg.bytes_hex)

Byte-stream buses (uart, rs485) take raw hex; CAN is frame-oriented:

from wisentwire import CanFrame

client.send_bus(ww_id=1, bus="rs485", hex_data="DEADBEEF")
client.send_can_frame(ww_id=1, frame=CanFrame(id="0x100", data_hex="0102030405060708"))

for msg in client.get_bus_messages(ww_id=1, bus="can"):
    print(msg.can_id, msg.dlc, msg.bytes_hex)

msg = client.wait_for_bus_rx(ww_id=1, bus="can", match_hex="0102")

On CAN messages bytes_hex holds the frame's data bytes and the can_id / ext / fd / rtr / dlc fields are populated; they are None for uart/rs485.

GPIO

from wisentwire import GpioPullPolicy

shadow = client.get_gpio_shadow(ww_id=1)
client.set_gpio_output(ww_id=1, pin=0, is_high=True)
client.set_gpio_input_pull_policy(ww_id=1, pin=0, pull_policy=GpioPullPolicy.UP)

# Friendly pin labels
names = client.get_gpio_names(ww_id=1)
names.outputs[0] = "LED"
client.update_gpio_names(ww_id=1, names=names)

# Input telemetry
client.set_gpio_telemetry(ww_id=1, enabled=True)
for r in client.get_gpio_telemetry(ww_id=1):
    print(r.pin, r.high, r.timestamp_micros)

Device registry

from wisentwire import DeviceLabel

client.trigger_device_scan(ww_id=1)
connected = client.list_connected_devices(ww_id=1)

devices = client.list_registered_devices()          # optional label= filter
device = client.create_registered_device(
    name="bench PSU",
    label=DeviceLabel.POWER_SUPPLY,
    vendor_id="0483",
    product_id="5740",
    serial_short="A1B2C3",
)
client.delete_registered_device(device_id=device.id)

Frame definitions

frames = client.list_frame_definitions()
commands = client.list_commands(frame_def_id=frames[0].id)

Reservations

list_reservations is scoped to one week — pass the week's start date:

reservations = client.list_reservations(week_start="2026-06-15")
booking = client.create_reservation(
    ww_id=1,
    start_at="2026-06-20T09:00:00Z",
    end_at="2026-06-20T10:00:00Z",
)
client.delete_reservation(reservation_id=booking.id)

Organization

org = client.get_organization()
members = client.list_members()
client.create_invitation(email="new@company.com")
client.update_member_role(user_id=7, role="ADMIN")

Account & system

me = client.me()
print(me.email, me.organization)

version = client.get_version()
print(version.version, version.stage)   # confirm which backend you hit

Error handling

Every API error raises a typed exception inheriting from WisentWireError:

from wisentwire import NotFoundError

try:
    client.get_wisentwire(ww_id=999)
except NotFoundError as e:
    print(f"Wire not found: {e}")

Any other non-2xx status raises the base WisentWireError. Each exception carries .status and the parsed ProblemDetail body as .detail.

The job pollers raise their own exceptions when a job reaches a terminal failure status (FAILED, TIMED_OUT, REJECTED, REMOVED, CANCELED). These signal device-side failure rather than an HTTP error, but they still inherit from WisentWireError, so a single except WisentWireError catches both transport and device-side failures:

from wisentwire import FlashFailedError

try:
    client.wait_flash_complete(ww_id=1, job_id=dispatch.job_id, timeout=120)
except FlashFailedError as e:
    print(f"Flash failed on device: {e}")

wait_debug_complete raises DebugFailedError the same way. Every wait_* helper takes a keyword-only timeout (seconds) and re-raises the last error when it expires.

Development

pip install -e ".[dev]"
pytest tests/ -v

Requirements

• Python >= 3.10
• requests >= 2.28
• tenacity >= 8.0