Skip to main content

yaku

English | 日本語

PyPI Python

Fully offline translator for command output. Only the prose gets translated; everything else is left verbatim.

Identifiers, flags, paths and quoted strings survive unchanged, because they are moved out of the way before the model sees the text and put back afterwards. No network access, no API keys, no data leaving the machine.

Install

uv tool install yaku
# or
pipx install yaku

yaku setup --lang ja

yaku setup downloads FuguMT at a pinned revision and converts it to a 62 MB int8 model. The model is not bundled because it is CC BY-SA 4.0. The converter needs torch, which yaku does not depend on, so the conversion runs in a throwaway environment created with uv.

yaku setup requires uv. Install it and put it on PATH before running the command. The conversion downloads torch and related packages (a few GB) into the uv cache; run uv cache clean afterwards to reclaim the space.

sentencepiece has no prebuilt wheel for Python 3.15 yet. If you install with Python 3.15, pick an older interpreter explicitly, for example pipx install yaku --python python3.14.

Requirements

  • Disk: 200 MB (about 6 GB temporarily during yaku setup)
  • Memory: up to 800 MB

Use

terraform plan 2>&1 | yaku
man tar | col -bx | yaku
kubectl describe pod web | yaku
pbpaste | yaku

Useful options:

Option Description
--lang ja Target language. It also selects the model and the thresholds. Use it when you have set up a language other than the default.
--fallback both|original|mark What to print for a line that fails the quality check. both prints the original with the translation below it (default), original prints only the original, and mark prints the translation prefixed with *. Use original when you would rather see no doubtful translation at all.
--show-reason Append why a line failed the quality check. Use it to see whether a flagged line lost a placeholder or only has an unusual length ratio.
--stats Write a summary to stderr. Use it to compare how many lines were translated or flagged after changing a rule or option.
--show-paths Print where the model, cache, config and rules are, then exit. Use it to find or delete the files yaku keeps.
--dry-run Show how each line is classified and masked, without loading the model. Use it to check a rule against your input quickly.
--join / --no-join Override the automatic detection of wrapped lines. Use --join if sentences are cut at line breaks, or --no-join if separate lines are being merged.
--width N Wrap the translated text at N columns. Use it when the output runs wider than your terminal.
--mask-off NAME,... Disable mask rules by name. Use it when a rule hides text that you want translated.
--mask-on NAME,... Enable mask rules that are off by default, such as VERSION. Use it when version numbers get changed in the translation.
--rules-dir PATH Load extra rules from this directory. Use it to try rules for a tool that yaku does not know yet.
--no-cache Do not read or write the translation cache. Use it when measuring speed, or to get a fresh translation after changing options.
--length-penalty N Beam search length penalty (default 1.5). Values above 1 favour complete translations over short ones. Raise it if clauses are dropped from translations.
--device NAME Inference device (default cpu). Change it only if your CTranslate2 build supports another device.
--compute-type TYPE CTranslate2 compute type (default int8). Rarely needed, because the model is stored as int8.
--threads N Number of inference threads (default 0, chosen automatically). Lower it to leave CPU for other work.

How it works

stdin
  ↓ strip ANSI escapes
  ↓ analysis pass        decides whether lines are wrapped prose
  ↓ classify             pass through / command example / translatable
  ↓ join                 reassemble wrapped sentences
  ↓ mask                 identifiers become T1, T2, ...
  ↓ split                back into sentences
  ↓ cache                keyed on the normalised masked text
  ↓ translate            CTranslate2 + SentencePiece
  ↓ check                lost placeholders, length ratio, repetition
  ↓ unmask               identifiers restored
stdout

Two parts carry most of the value.

Masking is not about withholding text. A sequence model that has never seen aws_instance.web_server_01 in training will hallucinate around it; T1 will be created is ordinary English and translates cleanly. Masking also cuts the request by 5 to 10 percent in tokens, and a placeholder that fails to come back is the only reliable sign that a clause was dropped.

The quality check exists because dropped clauses cannot be prevented. Each line is verified afterwards, and anything suspect is shown with its original text rather than silently replaced.

Limits

  • Translation quality is bounded by a 60M parameter model. It will not match a large language model.
  • Dropped clauses cannot be eliminated, only detected. Roughly 5 to 9 percent of translated lines in manual pages are flagged, of which some are real drops and some are Japanese simply being more compact than the ratio check allows.
  • Whether lines are joined is decided once for the whole input. Inside record-per-line output, a paragraph is still rejoined when its lines are filled to the wrap column, but a wrap that lands just before a capitalised word is left split.
  • Japanese output sometimes loses a space around a restored identifier.

Adding a language

--lang switches the model and the measured constants together, so a new language needs a profile, not just a model.

  1. Pick a CTranslate2-compatible model (Marian and OPUS-MT convert cleanly).
  2. uv run tools/check_placeholders.py to choose a placeholder format.
  3. uv run tools/eval_translate.py to measure the length ratio bounds.
  4. Write src/yaku/rules/target/<lang>.toml.

Development

uv sync
export YAKU_MODELS_DIR=models     # use the checkout's model, not the installed one
uv run pytest
uv run ruff check src tests tools && uv run ruff format src tests tools
uv run tools/measure_wrap.py captured-output.txt
uv run tools/eval_translate.py captured-output.txt

Rules live in src/yaku/rules/ as TOML. Users can add their own in ~/.config/yaku/rules/ or point --rules-dir at a directory; shipped rules are never edited in place.

Licence

MIT. The default model, FuguMT, is CC BY-SA 4.0 and is downloaded separately.

Metadata

Release files for yaku 0.1.3

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for yaku 0.1.3
File Size Uploaded Provenance Actions
yaku-0.1.3.tar.gz 49.6 kB Without provenance Details for yaku-0.1.3.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for yaku 0.1.3
File Interpreter ABI Platform Actions
yaku-0.1.3-py3-none-any.whl Python 3 none any Details for yaku-0.1.3-py3-none-any.whl

Total release size: 87.0 kB

Release files / yaku-0.1.3.tar.gz

Download URL yaku-0.1.3.tar.gz
Size 49.6 kB
Tags Source
SHA-256 checksum
How to use checksums
9a899a1c7073f7232873ea3f305503b63d5159b75a9e0c95a5119c6de2d84f16
BLAKE2b-256 checksum
How to use checksums
703153062ef254f4bad8066c2882fd2bb3c79ca9652eb73a2b32ced5cc4d70ad
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via uv/0.13.7 {"installer":{"name":"uv","version":"0.13.7","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}

Release files / yaku-0.1.3-py3-none-any.whl

Download URL yaku-0.1.3-py3-none-any.whl
Size 37.3 kB
Tags Python 3
SHA-256 checksum
How to use checksums
9cc8b9f531401f5ba0f8c573024b5fd9a77588d6f26f7b8550390852e1ee4376
BLAKE2b-256 checksum
How to use checksums
50586eb620a2673859458e6f430f73db313d0401dc008b76c9fcfc87c11f528c
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via uv/0.13.7 {"installer":{"name":"uv","version":"0.13.7","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}

Security for yaku 0.1.3

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page