yu-tcal 4.0.2

Add your description here

tcal: Program for the calculation of transfer integral

Requirements

• Python 3.9 or newer
• NumPy
• Gaussian 09 or 16 (optional)
• PySCF (optional, macOS / Linux / WSL2(Windows Subsystem for Linux))

Important notice

• When using Gaussian, the path of the Gaussian must be set.
• PySCF is supported on macOS and Linux. Windows users must use WSL2.

Installation

Using Gaussian 09 or 16 (without PySCF)

pip install yu-tcal

Using PySCF (CPU only, macOS / Linux / WSL2)

pip install "yu-tcal[pyscf]"

Using GPU acceleration with PySCF (macOS / Linux / WSL2)

1. Check your installed CUDA Toolkit version

nvcc --version

2. Install tcal with GPU acceleration

If your CUDA Toolkit version is 12.x, install tcal with GPU acceleration:

pip install "yu-tcal[gpu4pyscf-cuda12]"

If your CUDA Toolkit version is 11.x, install tcal with GPU acceleration:

pip install "yu-tcal[gpu4pyscf-cuda11]"

Verify Installation

After installation, you can verify by running:

tcal --help

Options

Short	Long	Explanation
-a	--apta	Perform atomic pair transfer analysis.
-c	--cube	Generate cube files.
-g	--g09	Use Gaussian 09. (default is Gaussian 16)
-h	--help	Show options description.
-l	--lumo	Perform atomic pair transfer analysis of LUMO.
-m	--matrix	Print MO coefficients, overlap matrix and Fock matrix.
-o	--output	Output csv file on the result of apta.
-r	--read	Read log/checkpoint files without executing calculations.
-x	--xyz	Convert xyz file to gjf file. (Gaussian only)
-M	--method METHOD/BASIS	Calculation method and basis set in "METHOD/BASIS" format. (default: B3LYP/6-31G(d,p))
	--cpu N	Set the number of CPUs. (default: 4)
	--mem N	Set the memory size in GB. (default: 16)
	--napta N1 N2	Perform atomic pair transfer analysis between different levels. N1 is the number of level in the first monomer. N2 is the number of level in the second monomer.
	--hetero N	Calculate the transfer integral of heterodimer. N is the number of atoms in the first monomer.
	--nlevel N	Calculate transfer integrals between different levels. N is the number of levels from HOMO-LUMO. N=0 gives all levels.
	--skip N...	Skip specified calculation. If N is 1, skip 1st monomer calculation. If N is 2, skip 2nd monomer calculation. If N is 3, skip dimer calculation.
	--pyscf	Use PySCF instead of Gaussian. Input file must be an xyz file.
	--gpu4pyscf	Use GPU acceleration via gpu4pyscf. (PySCF only)

How to use

Using Gaussian

1. Create gjf file

First of all, create a gaussian input file as follows:
ex: xxx.gjf

The xxx part is an arbitrary string.

Description of link commands

pop=full: Required to output coefficients of basis functions, overlap matrix, and Fock matrix.
iop(3/33=4,5/33=3): Required to output coefficients of basis functions, overlap matrix, and Fock matrix.

How to create a gjf using Mercury

1. Open cif file in Mercury.
2. Display the dimer you want to calculate.
   
3. Save in mol file or mol2 file.
4. Open a mol file or mol2 file in GaussView and save it in gjf format.

2. Execute tcal

Suppose the directory structure is as follows.

yyy
└── xxx.gjf

1. Open a terminal.
2. Go to the directory where the files is located.

cd yyy

3. Execute the following command.

tcal -a xxx.gjf

3. Visualization of molecular orbitals

1. Execute the following command.

tcal -cr xxx.gjf

2. Open xxx.fchk in GaussView.
3. [Results] → [Surfaces/Contours...]
4. [Cube Actions] → [Load Cube]
5. Open xxx_m1_HOMO.cube and xxx_m2_HOMO.cube.
6. Visualize by operating [Surface Actions] → [New Surface].
   

Using PySCF

1. Create xyz file

Prepare an xyz file of the dimer structure.
The first half of the atoms are treated as monomer 1, and the second half as monomer 2.
For heterodimers, use the --hetero N option to specify the number of atoms in the first monomer.

2. Execute tcal

tcal --pyscf -a xxx.xyz

To specify a calculation method and basis set:

tcal --pyscf -M "B3LYP/6-31G(d,p)" -a xxx.xyz

To use GPU acceleration:

tcal --gpu4pyscf -M "B3LYP/6-31G(d,p)" -a xxx.xyz

To read from existing checkpoint files without re-running calculations:

tcal --pyscf -ar xxx.xyz

Interatomic transfer integral

For calculating the transfer integral between molecule A and molecule B, DFT calculations were performed for monomer A, monomer B, and the dimer AB. The monomer molecular orbitals $\ket{A}$ and $\ket{B}$ were obtained from the monomer calculations. Fock matrix F was calculated in the dimer system. Finally the intermolecular transfer integral $t^{[1]}$ was calculated by using the following equation:

$$t = \frac{\braket{A|F|B} - \frac{1}{2} (\epsilon_{A}+\epsilon_{B})\braket{A|B}}{1 - \braket{A|B}^2},$$

where $\epsilon_A \equiv \braket{A|F|A}$ and $\epsilon_B \equiv \braket{B|F|B}$.

In addition to the intermolecular transfer integral in general use, we developed an interatomic transfer integral for further analysis $^{[2]}$. By grouping the basis functions $\ket{i}$ and $\ket{j}$ for each atom, the molecular orbitals can be expressed as

$$\ket{A} = \sum^A_{\alpha} \sum^{\alpha}_i a_i \ket{i},$$

$$\ket{B} = \sum^B_{\beta} \sum^{\beta}_j b_j \ket{j},$$

where $\alpha$ and $\beta$ are the indices of atoms, $i$ and $j$ are indices of basis functions, and $a_i$ and $b_j$ are the coefficients of basis functions. Substituting this formula into aforementioned equation gives

$$t = \sum^A_{\alpha} \sum^B_{\beta} \sum^{\alpha}_i \sum^{\beta}_j a^*_i b_j \frac{\braket{i|F|j} - \frac{1}{2} (\epsilon_A + \epsilon_B) \braket{i|j}}{1 - \braket{A|B}^2}$$

Here we define the interatomic transfer integral $u_{\alpha\beta}$ as:

$$u_{\alpha \beta} \equiv \sum^{\alpha}_i \sum^{\beta}_j a^*_i b_j \frac{\braket{i|F|j} - \frac{1}{2} (\epsilon_A + \epsilon_B) \braket{i|j}}{1 - \braket{A|B}^2}$$

References

[1] Veaceslav Coropceanu et al., Charge Transport in Organic Semiconductors, Chem. Rev. 2007, 107, 926-952.
[2] Koki Ozawa et al., Statistical analysis of interatomic transfer integrals for exploring high-mobility organic semiconductors, Sci. Technol. Adv. Mater. 2024, 25, 2354652.
[3] Qiming Sun et al., Recent developments in the PySCF program package, J. Chem. Phys. 2020, 153, 024109.

Citation

When publishing works that benefited from tcal, please cite the following article.
Koki Ozawa, Tomoharu Okada, Hiroyuki Matsui, Statistical analysis of interatomic transfer integrals for exploring high-mobility organic semiconductors, Sci. Technol. Adv. Mater., 2024, 25, 2354652.
DOI: 10.1080/14686996.2024.2354652

Example of using tcal

1. Satoru Inoue et al., Regioisomeric control of layered crystallinity in solution-processable organic semiconductors, Chem. Sci. 2020, 11, 12493-12505.
2. Toshiki Higashino et al., Architecting Layered Crystalline Organic Semiconductors Based on Unsymmetric π-Extended Thienoacenes, Chem. Mater. 2021, 33, 18, 7379–7385.
3. Koki Ozawa et al., Statistical analysis of interatomic transfer integrals for exploring high-mobility organic semiconductors, Sci. Technol. Adv. Mater. 2024, 25, 2354652.

Authors

Matsui Laboratory, Research Center for Organic Electronics (ROEL), Yamagata University
Hiroyuki Matsui, Koki Ozawa
Email: h-matsui[at]yz.yamagata-u.ac.jp
Please replace [at] with @

Acknowledgements

This work was supported by JST, CREST, Grand Number JPMJCR18J2.