zenmav 0.0.9

Pymavlink wrappers for easy drone control developped by Zenith Polymtl

Zenmav – Drone Control Library

Zenmav is a lightweight Python wrapper that lets you write five-line flight scripts for ArduPilot-controlled drones in either SITL or real hardware. Developed by Zenith Polytechnique Montréal.

Key Features

• Simplified Pymavlink Commands with Feedback – one-line TCP/UDP connection with heartbeat check and easy mode change
• Precise Navigation
  • Global GPS waypoints with user-defined accuracy
  • Local NED waypoints relative to home
  • Real-time body-frame speed control
• Autonomous Area Scans
  • Spiral pattern
  • Rectilinear/lawn-mower pattern
• Live Telemetry – local position, global GPS, heading, RC channels
• CSV Logging Utilities

Safety Disclaimer

Always test new scripts in SITL first.
When flying a real aircraft you are solely responsible for airworthiness, regulatory compliance and safe operation.
Operate in a clear area, keep visual line-of-sight and have a manual RC transmitter ready to take over. It is highly recommended NOT to use the arming command inside a script for a real drone unless thoroughly tested.

---

Installation

pip install zenmav

SITL users only need MAVProxy running on port 5762 (default shown below).

---

Quick Start

Below are three concise, copy-paste-ready examples that showcase different parts of Zenmav’s API.
Each script follows the same basic pattern—connect, arm, fly, land—while using a different feature set.

---

Example 1 — Fly to a local waypoint and come back

# example_local_target.py
# Demonstrates local_target()    (requires zenmav 0.0.5)

import time
from zenmav.core import Zenmav

def main() -> None:
    drone = Zenmav()                 # connect (default SITL TCP link)
    drone.arm()
    drone.set_mode("GUIDED")
    drone.takeoff(altitude=15)       # climb to 15 m AGL

    # Fly 30 m North, 20 m East, keep same altitude (Down = 0)
    print("Navigating to local waypoint …")
    drone.local_target([30, 20, 0])

    # Hold position 5 s
    time.sleep(5)

    # Return-to-Launch (waits for landing & disarm)
    drone.RTL()

if __name__ == "__main__":
    main()

---

Example 2 — Quick spiral scan of a 50 m radius area

# example_spiral_scan.py
# Demonstrates spiral_scan()     (requires zenmav 0.0.5)

from zenmav.core import Zenmav

def main() -> None:
    drone = Zenmav(gps_thresh=2)     # enables waypoint-reach detection in metres
    drone.arm()
    drone.set_mode("GUIDED")
    drone.takeoff(altitude=25)       # climb to 25 m AGL

    print("Starting spiral scan …")
    drone.spiral_scan(
        largeur_detection=8,         # 8 m sensor footprint
        altitude=25,                 # keep current altitude
        rayon_scan=50,               # cover a 50 m radius
        safety_margin=10             # add 10 m buffer
    )

    drone.RTL()

if __name__ == "__main__":
    main()

---

Example 3 — Log a GPS point to CSV and adjust cruise speed

# example_csv_and_params.py
# Shows get_global_pos(), insert_coordinates_to_csv(), set_param()   (zenmav 0.0.5)

import csv
from pathlib import Path
from zenmav.core import Zenmav

CSV_FILE = Path("waypoints.csv")

def main() -> None:
    drone = Zenmav(ip="/dev/ttyACM0") # example connection to pixhawk via USB
    drone.arm()
    drone.set_mode("GUIDED")
    drone.takeoff(altitude=10)

    # Grab current location and write it to CSV
    lat, lon, rel_alt = drone.get_global_pos()
    desc = "Take-off point"
    drone.insert_coordinates_to_csv(CSV_FILE, (lat, lon), desc)
    print(f"Saved home waypoint to {CSV_FILE}")

    # Slow the aircraft to 3 m/s (ArduPilot expects cm/s)
    drone.set_param("WPNAV_SPEED", 300)
    print("WPNAV_SPEED set to 3 m/s")

    # Fly forward at 3 m/s for ~3 s using body-frame velocity
    for _ in range(30):
        drone.speed_target([3, 0, 0])     # 3 m/s forward, level flight
    print("Short cruise complete")

    drone.RTL()

    # Optional: show CSV content
    print("\nCSV content:")
    with CSV_FILE.open() as fp:
        print(fp.read())

if __name__ == "__main__":
    main()

---

Zenmav Docs

Available in docs/zenmav.md

---

Troubleshooting

Symptom	Fix
No heartbeat in 5 seconds	Check connection string / firewall
PermissionError: ttyACM0	sudo usermod -aG dialout $USER
Waypoint never “reached”	Provide gps_thresh at construction
Takeoff not working	Make sure to be in Guided mode

---

Contributing

Issues and pull requests are welcome!
Please fork the repository, create a feature branch and open an MR when ready.

---

Maintainer

To push new version, update pyproject.toml

python3 -m build

Upload with

twine upload dist/*

Enter API Token (Currently only accessible by maintainer Colin Rousseau)