zephyr-installer

Installs embedded C libraries into a Zephyr application, nRF Connect SDK ones included.

A library written for any project has no idea what a Zephyr module is. This copies it into your application, makes it a module, adds it to the build, and switches it on in prj.conf, so west build picks it up and its settings live in Kconfig like everything else in Zephyr.

It works with any library that has an installer.yml at the root of its repository. I wrote it for my own NimaLTD libraries, and they all have one, but nothing in it is tied to them: add an installer.yml to yours, as shown below, and it installs the same way. The same file serves stm32-installer, esp32-installer, arduino-installer and pio-installer, so one library can be installed into a Zephyr application, an STM32 project, an ESP-IDF project, an Arduino sketch and a PlatformIO project alike.

Every command below uses owner/example, the library's GitHub owner and name, such as nimaltd/ee24. Put the real ones in its place.

Installing a library

Install the installer once. This needs internet:

pip install zephyr-installer

Then, from your application's folder, the one holding CMakeLists.txt and prj.conf, install a library by its GitHub owner and name. To see it work first, take zephyr-installer-example, a library made for trying the installer on:

zephyr-installer nimaltd/zephyr-installer-example

It builds in any Zephyr application, native_sim included, with its settings in Kconfig. Its README walks through an install, a setting changed in prj.conf, an option, and an uninstall. Any other library goes in the same way, as zephyr-installer owner/example.

Then build as always:

west build -b nrf52840dk/nrf52840

To update it later, pip install --upgrade zephyr-installer. To remove it, pip uninstall zephyr-installer.

When a newer zephyr-installer is out, the last line of a run says so, with that command. It asks PyPI at most once a day, waits no more than two seconds for an answer, and says nothing when there is none. --no-update-check turns it off, and so does INSTALLER_NO_UPDATE_CHECK set to anything. On a build server, where CI is set, it is off already.

On Windows, if zephyr-installer is not found after installing, pip put it in a folder that is not on your PATH. python -m zephyr_installer owner/example runs the same thing.

Every command

Each command with owner/example standing for the library. An update is the install again. Every option is explained under Options.

What happens

Take example, installed into an application called app:

app/
  CMakeLists.txt         one block added, above find_package(Zephyr)
  prj.conf               one block added, CONFIG_EXAMPLE=y and what it needs
  modules/example/
    example.h            the library's files, as its installer.yml lists them
    example.c
    zephyr/
      module.yml         written by the installer: the library as a Zephyr module
      CMakeLists.txt     its files, built when CONFIG_EXAMPLE is set
      Kconfig            CONFIG_EXAMPLE and the library's settings

The block in your CMakeLists.txt adds the library's folder to ZEPHYR_EXTRA_MODULES. That is how Zephyr is told about a module outside the west workspace, and it has to come before find_package(Zephyr), which is when Zephyr looks:

cmake_minimum_required(VERSION 3.20.0)
# >>> zephyr-installer: example >>>
# Added by zephyr-installer. Delete this block, and example's block in
# the Kconfig file, to drop the library from the build.
list(APPEND ZEPHYR_EXTRA_MODULES "${CMAKE_CURRENT_SOURCE_DIR}/modules/example")
# <<< zephyr-installer: example <<<

find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})

The block in prj.conf switches the library on, with the symbols it needs and a list of its settings:

# >>> zephyr-installer: example >>>
# Added by zephyr-installer, and written again on every install, so set
# example's settings below this block rather than in it.
# Its settings, as they are unless you set them:
#   CONFIG_EXAMPLE_POLL_CHUNK=32
CONFIG_I2C=y
CONFIG_EXAMPLE=y
# <<< zephyr-installer: example <<<

A symbol you already set yourself, on or off, is not set again: in Kconfig the line read last wins, and it would quietly undo your choice. It is still written in the block, commented out, with the line that set it, so the block shows everything the library asked for:

CONFIG_EXAMPLE=y
# CONFIG_I2C=y  (left out: prj.conf sets CONFIG_I2C=n)

And the installer warns about each one before it writes anything:

Requirements
  check   prj.conf sets CONFIG_I2C=n, and example needs y. The block has it commented out
          Your line is the one used. Change it if the library is to work.

Change your line, or delete it and install again, and the block sets it.

A library can need more than these two blocks, and then it says so in its installer.yml:

• Sysbuild settings, such as MCUboot switched on, go into a block of their own in sysbuild.conf, made when the application has none, with the same rules as the block in prj.conf. A library without them never touches sysbuild.conf.
• Lines of CMake it needs in your CMakeLists.txt go above find_package(Zephyr) or at the end of the file, wherever the library says, each group between two lines that name it:

# >>> zephyr-installer: example/conf >>>
# From example's installer.yml, and written again on every install.
list(APPEND EXTRA_CONF_FILE "${CMAKE_CURRENT_SOURCE_DIR}/example.conf")
# <<< zephyr-installer: example/conf <<<

Every block is written again on every install, so put your own lines outside them. An edit made inside one is noticed on the next install, and the file as it was is in the .bak.

Both files are copied aside before they change, as CMakeLists.txt.20261013-170013.bak and the like, and the files keep their own line endings. Installing twice changes nothing the second time.

The module is called example_lib, not example. Zephyr keeps one module per name, and one added by the application quietly takes the place of a module of the same name in the workspace: a library called littlefs would otherwise replace Zephyr's own littlefs.

Settings

A library's settings are Kconfig symbols, set in prj.conf like any other, below the installer's block:

CONFIG_EXAMPLE_POLL_CHUNK=64

west build -t menuconfig shows them too, under the library's name. The C code reads them as CONFIG_EXAMPLE_POLL_CHUNK, which Zephyr gives every file of the build.

Which Kconfig file

prj.conf is the one most applications have. When yours has more, such as a board's own file in boards/, the installer asks once which one gets the libraries:

This application has more than one Kconfig file: prj.conf, boards/nrf52840dk_nrf52840.conf
Kconfig file for the libraries [prj.conf]:

Press Enter for prj.conf. --conf boards/nrf52840dk_nrf52840.conf answers it on the command line, and a file that does not exist yet is created. One answer covers every library of that run, a library it needs included. On an update, a library stays in the file that already has its block, without a question. In a script, where nobody can answer, prj.conf is taken.

sysbuild.conf is never one of the choices. It holds sysbuild's settings, not the application's, so the installer neither asks about it nor reads it as one, and --conf sysbuild.conf is refused.

Files that become yours

A library can bring files that belong to your application rather than to the library: a VERSION, a CHANGELOG.md, an overlay in socs/ for each chip. Each is a start, made for you to change, so it is created in your application's folder only when it is not there:

Files
  written modules/example/example.h
  created VERSION  yours from now on
  created socs/nrf54l15_cpuapp.overlay  yours from now on

From then on it is yours. An update never writes over it, and says so with kept VERSION yours. An uninstall leaves it where it is, with kept VERSION yours, not removed. A library can never put such a file over one the installer manages, such as CMakeLists.txt or prj.conf, nor outside your application's folder.

Steps a library runs

A library can need something made that no file can carry, such as the key its images are signed with, made fresh for each product. It names a step for that, and once its files are in, the installer shows you exactly what will run, and asks:

Run
  signing-key  Make MCUboot's signing key, sign_key.pem
               python scripts/make_key.py sign_key.pem
               Run it? [Y/n]:

Enter runs it, in your application's folder. A Python script runs with the same Python as the installer, so it works the same on every computer. n leaves it, and the output says how to run it later. In a script, where nobody can answer, it is not run.

Nothing in a library's installer.yml can skip the question. Only you can: --run signing-key runs that step without asking, --no-run signing-key leaves it, and --yes runs every step and takes the offered answer to every other question, for a script or a build server.

A step that makes a file can name it, and when that file is already in your application the step is skipped without a question, so a second install never makes a second key. A step that names no file and ran before is not asked about again either, until the library changes what it runs. When a step fails, what was installed stays installed, and the installer ends with exit code 1, so a script notices.

What you see

A first install from GitHub, into an application whose prj.conf turned printk off:

Fetching owner/example ...

example 1.2.0
Driver for the X chip
driver / storage

Requirements
  note    CONFIG_I2C=y goes into prj.conf
  check   prj.conf sets CONFIG_PRINTK=n, and example needs y
          Your line is kept. Change it if the library is to work.
  note    Needs I2C, 400 kHz
          Enable it in your board's devicetree, or in an overlay of the application.

Folder to install example into [modules/example]:

Files
  written modules/example/example.h
  written modules/example/example.c

Project
  updated Zephyr module  Wrote example_lib: zephyr/module.yml, zephyr/CMakeLists.txt, zephyr/Kconfig.
  updated CMakeLists.txt  Added example to CMakeLists.txt.
          backup: CMakeLists.txt.20261013-170013.bak
  updated prj.conf  Added example to prj.conf.
          backup: prj.conf.20261013-170014.bak

Done. #include "example.h" and you are away.

The hardware a library uses is yours to give it in the devicetree, which the installer names but does not change.

What to install

The argument can be any of these, and you can give several at once:

A bare name with no owner, like example, is a NimaLTD library, nimaltd/example on GitHub, unless a folder of that name exists where you run it, in which case the folder is used. A path that does not exist is reported as missing rather than looked up on GitHub.

From GitHub, a library comes from its repository's default branch, the one GitHub shows first, whatever the repository calls it. After an @, a tag, a branch or a commit takes exactly that instead, and so does a GitHub address ending in /tree/v2.0.0. Every file comes from one commit, even when the branch moves on while they download, and the record keeps that commit, so you can always tell what you built with.

Options

Updating a library

Run the same command again. Every file of the library is replaced, so an update updates, and the module's three files are written again from the new installer.yml, so a source file the new version adds is built without you editing anything. A file that did not change is left alone, so the build does not configure again for nothing.

What you wrote between USER CODE BEGIN and USER CODE END in a library's file is kept. Outside those lines, the next install replaces it, and when that would lose something of yours the file is saved beside it first, as a .bak.

The record of what is installed, and where, is .zephyr-installer.json in your application's folder. For each library it also keeps where it came from, down to the commit, the blocks written into your files, and the steps that ran. Keep it in version control with the rest.

Uninstalling a library

zephyr-installer --uninstall example

From your application's folder, or with --project. Its blocks go from CMakeLists.txt, from the Kconfig file that has its block and from sysbuild.conf, the module files the installer wrote go from its folder, and then the library's own files. Installed and then uninstalled, CMakeLists.txt and prj.conf are back to the byte they were. sysbuild.conf stays, even when the block was all it held, and so do the files that became yours.

What was yours is saved before it goes, as a .bak beside it: any file of the library you wrote in between its USER CODE lines or changed by hand. A file you put in the library's folder yourself is left where it is, and the folder with it.

A setting you set yourself, below the installer's block, is your line, and it stays. The symbol it sets went with the library, though, and Zephyr stops on a symbol it does not know, so the installer names every such line:

  manual  prj.conf  prj.conf still sets what came with example, and Zephyr stops on a symbol it does not know. Take these lines out:
          CONFIG_EXAMPLE_POLL_CHUNK=64

A library another one needs stays, and the installer says which needs it. Name them all, in any order, and each goes after what needs it: zephyr-installer --uninstall osal ee24. When the library you took out brought another with it that nothing left needs, the last line names it, with the command that takes it out too. Uninstall works from .zephyr-installer.json, the record of what was installed and where.

A library that needs another

You install only the one you want, and what it needs goes in first, each as a module of its own with its own blocks. It comes from the release the library names for it, or else from its default branch. One already in the application at a version that will do is left alone. Everything is fetched before anything is installed, so when a library cannot be had, your application is left as it was.

Without internet

On a machine that has internet, pip download zephyr-installer saves one file, the installer, which needs nothing else. Download the library too, from the green Code button, Download ZIP. Then, on the machine with no internet:

pip install zephyr_installer-1.0.0-py3-none-any.whl
zephyr-installer D:/Downloads/example-main.zip

If the library needs another, give that zip on the same line. Behind a proxy, set HTTPS_PROXY to its address.

A private repository

A library in a private repository installs the same way, given a GitHub token that can read it. Make one once:

1. Open github.com/settings/personal-access-tokens and click Generate new token.

2. Give it a name and an expiry. Under Resource owner, pick the account or the organisation that owns the repository.

3. Under Repository access, choose Only select repositories and pick the library's repository.

4. Under Permissions, set Contents to Read-only:

   • Older layout: open Repository permissions and change Contents from No access to Read-only.
   • Newer layout: click + Add permissions, tick Contents, then set its access to Read-only.

   Metadata comes with it by itself. Contents is the one that matters: without it the token can see the repository but not read a file of it.

5. Click Generate token, and copy it. GitHub shows it only once.

Then give it with --key:

zephyr-installer owner/example --key github_pat_...

Or put it in GITHUB_TOKEN once, and install by name as usual. That keeps it out of your shell's history, where --key leaves it:

Windows, PowerShell:

$env:GITHUB_TOKEN = "github_pat_..."
zephyr-installer owner/example

Windows, Command Prompt:

set GITHUB_TOKEN=github_pat_...
zephyr-installer owner/example

Linux and macOS:

export GITHUB_TOKEN=github_pat_...
zephyr-installer owner/example

--key comes first when both are there. GH_TOKEN works as well, and if you use the gh command, gh auth token prints the token you are signed in with. Whichever way it comes, the token is sent to GitHub and nowhere else.

When the token cannot read the library, the installer says which of these it is:

• It can see the repository, but cannot read its files. The token has no Contents permission, only Metadata. Edit the token, and its value stays the same, so the command you ran keeps working: open the tokens page, click the token's name, click Edit, set Contents to Read-only as in step 4, and click Update at the bottom of the page. Then run the same command again.
• It cannot see the repository. The repository is not in the token's Repository access. Edit the token as above and add it.
• GitHub did not accept the token. It has expired, been revoked, or was copied with a character missing. Make a new one.

A repository of an organisation can need one more step: an organisation that asks for fine-grained tokens to be approved shows the token nothing of its repositories until an owner of the organisation approves it, under its settings, Personal access tokens, Pending requests.

For someone writing a library

Put an installer.yml at the root of the repository. Any library can have one, whoever wrote it, and the one file serves zephyr-installer and the other installers alike: each reads its own keys and leaves the others' alone.

Every key zephyr-installer reads is below, each with what it does. Only name and files are required; leave out what your library does not need. For a working one to copy, see zephyr-installer-example.

name: example                      # the library's name, its folder and its Kconfig symbol
description: Driver for the X chip # one line, shown while installing and in menuconfig
repository: https://github.com/owner/example  # where it comes from
license: Apache-2.0                # the licence's SPDX name
version: 1.0.0                     # only when the first header has no @version tag

kind: driver                       # driver, middleware, rtos, protocol, filesystem,
                                   # utility or bsp
category: storage                  # sensor, storage, display, communication, wireless,
                                   # rtos, timing, power, input, math or system
provides: []                       # what it gives other libraries: [rtos] for an RTOS

requires:
  zephyr_installer: 2.0.0          # the oldest zephyr-installer that reads this file
  libraries:                       # other libraries, installed first when missing
    - osal >= 1.0.0                # no owner means nimaltd; >= the oldest that will do
    - owner/lib                    # anyone else's, as owner/name
    - owner/lib@v1.2.0             # a tag, branch or commit, not its default branch
    - source: owner/other@v2.9.3   # a repository with no installer.yml of its own,
      manifest: manifests/other.yml  # with one this library carries for it
      minimum: 2.9.0               # the oldest version that will do
  kconfig:                         # symbols it needs, set in the Kconfig file
    - I2C                          # a symbol alone is set to y
    - MAIN_STACK_SIZE=2048         # or SYMBOL=value: y, n, a number, 0x.. or "text"
  peripherals:                     # hardware it uses, named to the user
    - type: i2c                    # what it is
      count: 1                     # how many
      note: 400 kHz                # how to set it up

install:
  layout: mirror                   # mirror keeps the repository's folders,
                                   # flat (the default) puts every file at the top
  include_dirs: [src]              # include folders, only when the guess is wrong
  defines:                         # given to the whole build, NAME or NAME=value
    - EXAMPLE_FAST

files:
  headers:                         # .h files; the first is the one to #include
    - src/example.h
    - src/port/*.h                 # a wildcard, matched the way a shell would
  sources:                         # .c files, built when the library is switched on
    - src/example.c
    - from: src/port/spi.c         # a file that goes somewhere of its own,
      to: port/spi.c               # whatever the layout says

options:                           # parts the user chooses at install
  littlefs:                        # the name typed after --with
    description: LittleFS file system on the flash  # the question asked
    libraries:                     # libraries this part needs, installed first
      - littlefs >= 2.11.0
    files:                         # its files, written like files above
      sources:
        - src/example_lfs.c

extras:                            # copied as they are, never compiled
  - LICENSE.md                     # LICENSE.md and NOTICE are the default,
  - NOTICE                         # so leave this out if that is all
  - README.md

once:                              # the application's own files: made when missing,
                                   # then the user's, never replaced or removed
  - from: project/VERSION          # the file in the repository, to the application's folder
  - from: boards/nrf54l15.overlay  # to: its place in the application, when not its name
    to: socs/nrf54l15_cpuapp.overlay

run:                               # steps run once the files are in, each asked about first
  - label: signing-key             # the name typed after --run
    description: Make the signing key, sign_key.pem  # shown with the question
    script: scripts/make_key.py    # Python, run with the installer's own Python,
    args: [sign_key.pem]           # or command: [program, arguments], with no shell
    unless: sign_key.pem           # skipped when this file is in the application already

zephyr:                            # read by zephyr-installer only
  kconfig: EXAMPLE                 # the library's symbol; the name in capitals when left out
  cmake:                           # groups of CMake lines, each in a place of its own
    - label: libs                  # names the group, in the lines around it
      where: module                # module (the default), before-zephyr or after-zephyr
      lines:
        - zephyr_library_link_libraries(mbedTLS)
  sysbuild:                        # sysbuild settings, a block in sysbuild.conf
    - BOOTLOADER_MCUBOOT           # a symbol alone is set to y, without SB_CONFIG_
    - BOOT_SIGNATURE_KEY_FILE="${APP_DIR}/sign_key.pem"  # or SYMBOL=value
  settings:                        # Kconfig symbols the user sets, CONFIG_<name> in the code
    - name: EXAMPLE_POLL_CHUNK     # the symbol, best started with the library's own
      type: int                    # bool, int, hex or string
      default: 32                  # required: true or false, a number, 0x.. or text
      range: [1, 32768]            # int and hex only: [smallest, largest]
      prompt: Bytes read per call  # one line, shown in menuconfig
      help: |                      # as many lines as it takes, shown in menuconfig
        A read by polling moves at most this many bytes per call.

Keys only the other installers read, such as requires.stm32_installer, requires.hal_modules and esp32, can stay in the same file. This installer skips them.

Leave version out. The installer reads the version from the @version tag in the file comment of the first header listed, so it is written in the code and nowhere else.

requires.zephyr_installer is the oldest zephyr-installer that reads the file correctly. It is checked before anything else in the file is read, so an older installer stops with a message saying to update, rather than read the file wrongly. Write it as three numbers, 1.0.0: unquoted, YAML reads 1.10 as the decimal number 1.1, and that is refused.

A library that uses anything 2.0.0 brings says requires.zephyr_installer: 2.0.0: once files in the application's folder, run, groups under zephyr.cmake, zephyr.sysbuild, or a library it needs given with an @ or a manifest. The version also decides where once files go. A manifest asking for 2.0.0 or newer puts them in the application's folder, and one asking for less keeps the meaning it was written for, the library's own folder, so a release tagged before 2.0.0 still installs and builds as it did.

More CMake for a library

A library that needs more than its files and its defines, a library of Zephyr's linked in, an option for its compiler, or a line in the application's own CMakeLists.txt, lists the lines under zephyr.cmake, in groups. Each group has a label, a place and its lines:

zephyr:
  cmake:
    - label: libs                  # where: module, the default
      lines:
        - zephyr_library_link_libraries(mbedTLS)
        - zephyr_library_compile_options(-O2)
    - label: conf
      where: before-zephyr
      lines:
        - list(APPEND EXTRA_CONF_FILE "${CMAKE_CURRENT_SOURCE_DIR}/example.conf")
    - label: report
      where: after-zephyr
      lines:
        - 'message(STATUS "example: built for ${BOARD}")'

Each group is written between two lines that name it, # >>> zephyr-installer: example/conf >>> and its pair, and groups in one place keep the manifest's order. Every install writes them again: a group whose lines changed is updated, one whose where changed is moved, and one the manifest no longer has is taken out. A line keeps the spaces it starts with, so the body of an if() can be indented.

The label is lower case letters, digits, _ and -, starting with a letter, and two groups of one library, its options' groups counted, never share one. An option brings groups of its own under options.<name>.zephyr.cmake, written while it is chosen and taken out by the update that turns it off. A line holding a colon, as message() often does, goes in quotes, or YAML reads it as a mapping.

zephyr_library_... commands act on the library's own files only. A library of headers alone has no library of its own, so it uses the zephyr_... ones, which act on the whole build. The lines run when the user configures the build, the same as a module the library ships itself would, so they are the library's to answer for.

The form from before 2.0.0, a plain list of lines, still installs: it is one group in module, written as it always was.

The user has a place in the module's file too. Its last lines are a USER CODE section, empty to start with, and every install keeps what is written in it, the way a configuration header keeps settings:

  # USER CODE BEGIN EXAMPLE_CMAKE
  zephyr_library_compile_definitions(EXAMPLE_DEBUG=1)
  # USER CODE END EXAMPLE_CMAKE
endif()

On an uninstall, a section with something in it is saved as a .bak before the file goes.

Sysbuild settings

MCUboot is an image of its own, built by sysbuild, and sysbuild does not see a module added through ZEPHYR_EXTRA_MODULES. So a library that needs it switched on lists the settings under zephyr.sysbuild, and they go into a block in the application's sysbuild.conf:

zephyr:
  sysbuild:
    - BOOTLOADER_MCUBOOT
    - BOOT_SIGNATURE_TYPE_ECDSA_P256
    - BOOT_SIGNATURE_KEY_FILE="${APP_DIR}/sign_key.pem"

# >>> zephyr-installer: example >>>
# Added by zephyr-installer, and written again on every install, so set
# example's sysbuild settings below this block rather than in it.
SB_CONFIG_BOOTLOADER_MCUBOOT=y
SB_CONFIG_BOOT_SIGNATURE_TYPE_ECDSA_P256=y
SB_CONFIG_BOOT_SIGNATURE_KEY_FILE="${APP_DIR}/sign_key.pem"
# <<< zephyr-installer: example <<<

Each is read like requires.kconfig, written without SB_CONFIG_, which the installer adds. A value is written as given: sysbuild expands ${APP_DIR} itself. The block follows the rules of the one in prj.conf: a symbol the user sets outside it is left commented out in it, an uninstall takes it out, and sysbuild.conf is made when the application has none.

Files of the application's own

A file that belongs to the application rather than to the library goes under once: a VERSION, which Zephyr reads from the application's folder, a CHANGELOG.md, an overlay. It is created in the application's folder when it is missing, and is the user's from then on: never replaced by an update, never removed by an uninstall.

once:
  - from: project/VERSION              # to: the file's own name, VERSION
  - from: project/CHANGELOG.md
  - from: boards/nrf54l15.overlay
    to: socs/nrf54l15_cpuapp.overlay   # a folder inside the application is fine

from is a file of the library's repository, and to its place from the application's folder, its own name when left out. Zephyr applies an overlay in the application's socs/ folder to every board with that chip, so a library can bring one per chip this way.

Each is checked before anything is written. to stays inside the application, names none of the files the installer manages, CMakeLists.txt, the Kconfig file with the library's block, the record, and sysbuild.conf when the library has sysbuild settings, and does not point into the library's own folder, which every install replaces. Two entries with one to are refused. And from, like every file a manifest names, stays inside the library: no .., no absolute path, no link leading out of it.

What the user changes in their settings belongs in USER CODE sections of the library's own files, not in once, which is for files outside the library.

Steps run after the install

Something no file can carry, such as a signing key made fresh for each product, is made by a step under run. It runs once the library's files are in, in the application's folder:

run:
  - label: signing-key
    description: Make MCUboot's signing key, sign_key.pem
    script: scripts/make_key.py
    args: [sign_key.pem]
    unless: sign_key.pem

• label names the step, typed after --run, in lower case letters, digits, _ and -.
• description is shown with the question.
• script is a Python file of the library, run with the installer's own Python, so it works on every computer the installer does. Or command, a program and its arguments as a list, [imgtool, keygen, -k, sign_key.pem, -t, ecdsa-p256], run as it is, with no shell. One of the two, never both.
• args are added after either.
• unless names a file the step makes, from the application's folder. When it is there, the step is skipped without a question.

The step sees where things are in its environment: INSTALLER_PROJECT, the application's folder, INSTALLER_LIBRARY, the library's folder in it, INSTALLER_NAME and INSTALLER_VERSION, the library's, and INSTALLER, zephyr-installer.

The user is always asked, and is shown exactly what will run. Nothing in the manifest can turn that off, only the user, with --run or --yes. A step with no unless that ran before is not asked about again until what it runs changes, so make it safe to run twice anyway. A step that fails leaves the install as it is and ends the run with exit code 1.

A library it needs

requires.libraries lists the libraries yours needs, each installed first when it is missing or older than the version given:

requires:
  libraries:
    - osal >= 1.0.0                    # no owner means nimaltd: github.com/nimaltd/osal
    - someone/lib                      # anyone else's, by owner and name
    - someone/lib@v1.2.0               # exactly this tag, branch or commit
    - source: littlefs-project/littlefs@v2.11.0
      manifest: manifests/littlefs.yml # an installer.yml for a repository without one
      minimum: 2.11.0

Without an @, a library comes from its repository's default branch. The last form installs a library whose repository has no installer.yml of its own: yours carries one for it, at the path given, written as if it sat at the root of that repository.

Settings in the code

Zephyr hands every file of the build its configuration, so the library's code reads a setting as a macro. One header can serve Zephyr and any other project, taking the setting from Kconfig when it is there:

#ifdef CONFIG_EXAMPLE_POLL_CHUNK
#define EXAMPLE_POLL_CHUNK          CONFIG_EXAMPLE_POLL_CHUNK
#endif

#ifndef EXAMPLE_POLL_CHUNK
#define EXAMPLE_POLL_CHUNK          32U
#endif

A bool setting that is off is not defined at all, which is how Kconfig does it, so test it with #ifdef or IS_ENABLED(). A string arrives in quotes, ready for C.

Each setting is checked at install, since all of it is written into a Kconfig file: a default of the wrong type, one outside its range, or a name Kconfig would refuse stops the install with the reason, before anything is written.

A library with its own module

A library that ships a zephyr/module.yml of its own, listed under extras or files so it is installed, knows its build better than the installer does. Its module is used as it is: nothing is written into its zephyr folder, and only the two blocks in the application are added. zephyr.kconfig then names the symbol its Kconfig defines, for the block in prj.conf to set.

Running the tests

The shared core, core-installer, is a git submodule in src/core, so clone with it:

git clone --recursive https://github.com/nimaltd/zephyr-installer.git

In a clone made without --recursive, git submodule update --init fetches it. Then:

python test/run_tests.py

CI also installs two small libraries from test/e2e/ into an application, one of them with everything 2.0.0 brings: files made once, groups of CMake lines in all three places, and a sysbuild setting. It builds the application with Zephyr for native_sim, runs it, checks what it prints, and then takes that library out again and checks nothing of it is left in the application's files. So every release is known to build with real Zephyr.

Support

I write these tools and libraries in my own time and give them away, because good tools should be easy to get. If this one saved you an afternoon, there are two things that genuinely help:

Star the repo. It costs you one click, it helps other engineers find the tool, and it is the main reason I keep going.

Buy me a coffee on Ko-fi. Any amount is a real motivation to keep writing, documenting and maintaining this work.

License

Apache License 2.0. See LICENSE.