zyxel-cli 0.1.0

CLI tool for managing the Zyxel AX7501-B0 router (Digi ISP) via the DAL API

zyxel-cli

CLI tool for managing the Zyxel AX7501-B0 router (Digi ISP) via the DAL API.

Credits

The authentication flow (AES-256-CBC + RSA hybrid encryption) is based on the reverse-engineering work from the ha-zyxel project:

• https://github.com/zulufoxtrot/ha-zyxel

Requirements

• Python 3.8+
• requests
• pycryptodome

Installation

Recommended: pipx (isolated install)

pipx installs the CLI into its own virtualenv and puts zyxel-cli on your PATH, without polluting the system Python.

# From a clone of this repo
pipx install .

# Or directly from git
pipx install git+https://github.com/millaguie/zyxel-cli

# Upgrade later
pipx upgrade zyxel-cli

# Uninstall
pipx uninstall zyxel-cli

Alternative: pip

pip install .
# or just the runtime deps, to use the standalone ./zyxel-cli script:
pip install requests pycryptodome

Standalone (no install)

The repo also ships a zyxel-cli launcher script at the root. Once deps are installed you can run it directly from the clone:

./zyxel-cli status

Configuration

Set environment variables or use command-line flags:

Variable	Flag	Default
ZYXEL_HOST	--host	192.168.1.1
ZYXEL_USER	--user	user
ZYXEL_PASS	--password	user

Usage

System status

zyxel-cli status

Shows model, firmware, serial number, uptime, CPU/RAM usage, and active ports.

DNS management

zyxel-cli dns list
zyxel-cli dns add trenes.millaguie.net 192.168.1.7
zyxel-cli dns delete trenes.millaguie.net
zyxel-cli dns delete --index 5

Static DHCP leases

zyxel-cli dhcp list
zyxel-cli dhcp add AA:BB:CC:DD:EE:FF 192.168.1.100
zyxel-cli dhcp delete AA:BB:CC:DD:EE:FF
zyxel-cli dhcp delete --index 3

NAT / port forwarding

zyxel-cli nat list
zyxel-cli nat add "Web Server" 80 192.168.1.10 80 --proto tcp
zyxel-cli nat add "Game" 27015 192.168.1.50 27015 --proto udp
zyxel-cli nat add "Range" 8000 192.168.1.10 8000 --ext-port-end 8010 --int-port-end 8010
zyxel-cli nat delete "Web Server"
zyxel-cli nat delete --index 2

Static routes

zyxel-cli route list
# route a subnet reachable through a gateway on your LAN:
zyxel-cli route add remote-lan 10.0.0.0 255.255.255.0 192.168.1.2
# route a destination out a specific WAN interface instead of the LAN:
zyxel-cli route add via-wan 203.0.113.0 255.255.255.0 0.0.0.0 --interface IP.Interface.3
zyxel-cli route delete remote-lan
zyxel-cli route delete --index 1

--interface defaults to Default (the LAN bridge; the router resolves it to IP.Interface.1). Pass a WAN interface path (see zyxel-cli raw wan for the ipIfacePath values, e.g. IP.Interface.3) to route via that WAN.

WAN / public IP

zyxel-cli wan

Shows IP address, gateway, DNS servers, encapsulation, VLAN, PPP info, and IPv6.

WiFi information

zyxel-cli wifi

Shows all SSIDs with band, channel, bandwidth, security mode, and visibility.

Raw OID query

zyxel-cli raw lan
zyxel-cli raw firewall
zyxel-cli raw gpon

Queries any DAL OID and prints the raw JSON response. Useful for exploring undocumented features.

DAL API — Known OIDs

The Zyxel DAL (Device Abstraction Layer) API exposes data via OIDs queried at:

GET /cgi-bin/DAL?oid=<OID>&sessionkey=<KEY>

All requests and responses are AES-256-CBC encrypted.

OIDs with data (tested on AX7501-B0, firmware V5.17)

OID	Description	Managed by zyxel-cli
status	System dashboard (model, firmware, uptime, CPU, RAM, ports)	status
dns	DNS host overrides (split-horizon)	dns
static_dhcp	Static DHCP reservations	dhcp
nat	NAT / port forwarding rules	nat
wan	WAN interfaces (IP, gateway, DNS, PPP, IPv6)	wan
wlan	WiFi SSIDs and radio settings	wifi
lan	LAN interfaces and DHCP server config	raw lan
firewall	Firewall rules and levels	raw firewall
macfilter	MAC address filtering	raw macfilter
qos	QoS settings	raw qos
ddns	Dynamic DNS configuration	raw ddns
time	NTP and timezone settings	raw time
gpon	GPON/fiber stats (Rx/Tx power, ONU state)	raw gpon
wps	WPS settings	raw wps
snmp	SNMP configuration	raw snmp

OIDs tested but empty/error

The following OIDs were tested and returned no data or errors. They may work on other firmware versions or with different configurations:

acl, account, auto_provision, bandwidth_mgmt, cellular, certificate,
classfy, content_filter, dhcpv6, disk, dns_route, dsl, dyndns, email,
ethwan, ftpd, guest_wifi, home_auto, httpd, ipsec, ipv6, log, loopback,
mcast, mesh, nat_passthrough, network_map, noti, openvpn, parental,
port_trigger, pptp, ripd, routing, schedulerule, skin, sshd, storage,
switch, tr069, trust_domain, upnp, url_filter, usb, voip, vpn,
wifisonc, wlan_macfilter, wlan_scheduler, wwan, zebra

Discovering new OIDs

1. Use zyxel-cli raw <oid> to query any OID
2. The response includes a result field: ZCFG_SUCCESS means the OID exists
3. Data is in the Object field (list of entries or a single dict)
4. The router web UI can also reveal OIDs — inspect network requests in browser DevTools (the DAL endpoint paths contain the OID names)
5. POST to create entries, DELETE with &Index=N to remove them