GeneFior 0.5.1

GeneFior: A toolkit that uses BLAST, BWA, Bowtie2, DIAMOND, and Minimap2 to search DNA and protein sequences against DNA and AA sequence databases.

GeneFíor (pronounced Gene "feer", sounds like beer)

This toolkit utilises a combined approach that uses BLAST, BWA, Bowtie2, DIAMOND, and Minimap2 to search DNA and protein sequences against DNA and AA sequence databases - Databases including CARD/RGI and ResFinder are preloaded.

Requirements:

- python >=3.10
- samtools >=1.19.2
- blast >=2.17.0
- diamond >=2.1.13
- bowtie2 >=2.5.4
- bwa >=0.7.19
- minimap2 >=2.30
- seqtk >=1.4

Installation:

GeneFíor is available via bioconda. To install, use the following command:

conda install -c bioconda genefior

GeneFíor is also available via pip, but bioconda is recommended to ensure all dependencies are correctly installed.

pip install genefior

Menu for GeneFíor (GeneFíor or GeneFíor):

BLASTn and BLASTx are disabled by default due to their slow speed, but can be enabled if desired.

GeneFíor - The Multi-Tool Gene Detection Toolkit.

Required selection:
  -i INPUT, --input INPUT
                        Input FASTA/FASTAQ file(s) with sequences to analyse - Separate FASTQ R1 and R2 with a comma for Paired-FASTQ or single file path for Single-FASTA - .gz files
                        accepted
  -st {Single-FASTA,Paired-FASTQ}, --sequence-type {Single-FASTA,Paired-FASTQ}
                        Specify the input Sequence Type: Single-FASTA or Paired-FASTQ (R1+R2) - Will convert Paired-FASTQ to single combined FASTA for BLAST and DIAMOND analyses (SLOW)
  -o OUTPUT, --output OUTPUT
                        Output directory for results

Output selection:
  --report-fasta {None,all,detected,detected-all}
                        Specify whether to output sequences that "mapped" to genes."all" should only be used for deep investigation/debugging."detected" will report the reads that passed
                        detection thresholds for each detected gene."detected-all" will report all reads for each detected gene. (default: None)

Tool selection:
  --tools {blastn,blastx,diamond,bowtie2,bwa,minimap2,all} [{blastn,blastx,diamond,bowtie2,bwa,minimap2,all} ...]
                        Specify which tools to run - "all" will run all tools (default: all except blastx/n as it is very slow!!)

Database selection:
  --db-path USER_DB_PATH
                        Path to the directory containing user-provided databases in correct format (see build_databases.sh) (can supply multiple paths separated by commas)

Query threshold Parameters:
  --q-min-cov QUERY_MIN_COVERAGE, --query-min-coverage QUERY_MIN_COVERAGE
                        Minimum coverage threshold in percent (default: 40.0)

Gene Detection Parameters:
  --d-min-cov DETECTION_MIN_COVERAGE, --detection-min-coverage DETECTION_MIN_COVERAGE
                        Minimum coverage threshold in percent (default: 80.0)
  --d-min-id DETECTION_MIN_IDENTITY, --detection-min-identity DETECTION_MIN_IDENTITY
                        Minimum identity threshold in percent (default: 80.0)
  --d-min-base-depth DETECTION_MIN_BASE_DEPTH, --detection-min-base-depth DETECTION_MIN_BASE_DEPTH
                        Minimum average base depth for detection - calculated against regions of the detected gene with at least one read hit (default: 1.0)
  --d-min-reads DETECTION_MIN_NUM_READS, --detection-min-num-reads DETECTION_MIN_NUM_READS
                        Minimum number of reads required for detection (default: 1)

Mode Selection:
  --dna-only            Run only DNA-based tools
  --protein-only        Run only protein-based tools
  --sensitivity {default,conservative,sensitive,very-sensitive}
                        Preset sensitivity levels - default means each tool uses its own default settings and very-sensitive applies DIAMONDs --ultra-sensitive and Bowtie2s --very-
                        sensitive-local presets

Tool-Specific Parameters:
  --minimap2-preset {sr,map-ont,map-pb,map-hifi}
                        Minimap2 preset: sr=short reads, map-ont=Oxford Nanopore, map-pb=PacBio, map-hifi=PacBio HiFi (default: sr)

Runtime Parameters:
  -t THREADS, --threads THREADS
                        Number of threads to use (default: 4)
  -tmp TEMP_DIRECTORY, --temp-directory TEMP_DIRECTORY
                        Path to temporary to place input FASTA/Q file(s) for faster IO during BLAST - Path will also be used for all temporary files (default: system temp directory)
  --no_cleanup
  --verbose

Miscellaneous Parameters:
  -v, --version         Show program version and exit

Examples:
  # Basic usage with default tools (runs DNA & protein tools)
  genefior -i reads.fasta -st Single-FASTA --db-path ~/my-db-dir -o results/

  # Select specific tools and output detected FASTA sequences
  genefior -i reads.fasta -st Single-FASTA --db-path ~/my-db-dir -o results/     --tools diamond bowtie2     --report_fasta detected

  # Custom thresholds, paired-fastq input, threads and dna-only mode
  genefior -i reads_R1.fastq,reads_R2.fastq -st Paired-FASTQ --db-path ~/my-db-dir -o results/     -t 16 --d-min-cov 90 --d-min-id 85     --dna-only

AMRFíor has been absorbed into GeneFíor but is still available as a separate command for backwards compatibility with the same functionality and AMR databases.

Menu for AMRfíor:

CARD and resfinder databases are used by default, but user-provided databases can also be specified. The NCBI AMR database is also available as an option. All 3 databases are prepackaged and formatted as part of the bioconda installation of AMRfíor.

Menu for AMRfíor (AMRfíor or AMRfíor):

BLASTn and BLASTx are disabled by default due to their slow speed, but can be enabled if desired.

AMRfíor - The Multi-Tool AMR Gene Detection Toolkit.
Required selection:
  -i INPUT, --input INPUT
                        Input FASTA/FASTAQ file(s) with sequences to analyse - Separate FASTQ R1 and R2 with a comma for Paired-FASTQ or single file path for Single-FASTA - .gz files
                        accepted
  -st {Single-FASTA,Paired-FASTQ}, --sequence-type {Single-FASTA,Paired-FASTQ}
                        Specify the input Sequence Type: Single-FASTA or Paired-FASTQ (R1+R2) - Will convert Paired-FASTQ to single combined FASTA for BLAST and DIAMOND analyses (SLOW)
  -o OUTPUT, --output OUTPUT
                        Output directory for results

Output selection:
  --report-fasta {None,all,detected,detected-all}
                        Specify whether to output sequences that "mapped" to genes."all" should only be used for deep investigation/debugging."detected" will report the reads that passed
                        detection thresholds for each detected gene."detected-all" will report all reads for each detected gene. (default: None)

Tool selection:
  --tools {blastn,blastx,diamond,bowtie2,bwa,minimap2,all} [{blastn,blastx,diamond,bowtie2,bwa,minimap2,all} ...]
                        Specify which tools to run - "all" will run all tools (default: all except blastx/n as it is very slow!!)

Database selection:
  --databases {resfinder,card,ncbi,user-provided} [{resfinder,card,ncbi,user-provided} ...]
                        Specify which AMR gene databases to use (default: resfinder and card) -If "user-provided" is selected, please ensure the path contains the appropriate databases
                        set up as per the documentation and specify the path with --user-db-path.
  --user-db-path USER_DB_PATH
                        Path to the directory containing user-provided databases (required if --databases includes "user-provided")

Query threshold Parameters:
  --q-min-cov QUERY_MIN_COVERAGE, --query-min-coverage QUERY_MIN_COVERAGE
                        Minimum coverage threshold in percent (default: 40.0)

Gene Detection Parameters:
  --d-min-cov DETECTION_MIN_COVERAGE, --detection-min-coverage DETECTION_MIN_COVERAGE
                        Minimum coverage threshold in percent (default: 80.0)
  --d-min-id DETECTION_MIN_IDENTITY, --detection-min-identity DETECTION_MIN_IDENTITY
                        Minimum identity threshold in percent (default: 80.0)
  --d-min-base-depth DETECTION_MIN_BASE_DEPTH, --detection-min-base-depth DETECTION_MIN_BASE_DEPTH
                        Minimum average base depth for detection - calculated against regions of the detected gene with at least one read hit (default: 1.0)
  --d-min-reads DETECTION_MIN_NUM_READS, --detection-min-num-reads DETECTION_MIN_NUM_READS
                        Minimum number of reads required for detection (default: 1)

Mode Selection:
  --dna-only            Run only DNA-based tools
  --protein-only        Run only protein-based tools
  --sensitivity {default,conservative,sensitive,very-sensitive}
                        Preset sensitivity levels - default means each tool uses its own default settings and very-sensitive applies DIAMONDs --ultra-sensitive and Bowtie2s --very-
                        sensitive-local presets

Tool-Specific Parameters:
  --minimap2-preset {sr,map-ont,map-pb,map-hifi}
                        Minimap2 preset: sr=short reads, map-ont=Oxford Nanopore, map-pb=PacBio, map-hifi=PacBio HiFi (default: sr)

Runtime Parameters:
  -t THREADS, --threads THREADS
                        Number of threads to use (default: 4)
  -tmp TEMP_DIRECTORY, --temp-directory TEMP_DIRECTORY
                        Path to temporary to place input FASTA/Q file(s) for faster IO during BLAST - Path will also be used for all temporary files (default: system temp directory)
  --no_cleanup
  --verbose

Miscellaneous Parameters:
  -v, --version         Show program version and exit

Examples:
  # Basic usage with default tools (runs DNA & protein tools)
  AMRfior -i reads.fasta -st Single-FASTA -o results/

  # Select specific tools and output detected FASTA sequences
  AMRfior -i reads.fasta -st Single-FASTA -o results/     --tools diamond bowtie2     --report_fasta detected

  # Custom thresholds, paired-fastq input, threads and dna-only mode
  AMRfior -i reads_R1.fastq,reads_R2.fastq -st Paired-FASTQ -o results/     -t 16 --d-min-cov 90 --d-min-id 85     --dna-only

Menu for Genefíor-Recompute (Genefíor-Recompute or genefíor-recompute):

Genefíor-Recompute is used to recalculate detection statistics from existing sequence search outputs with different thresholds without needing to rerun the entire analysis.

GeneFíor-Recompute: Recalculate detection statistics from existing sequence search outputs

options:
  -h, --help            show this help message and exit
  -i INPUT, --input INPUT
                        Input directory containing Genefíor results (with
                        raw_outputs/ subdirectory)
  -o OUTPUT, --output OUTPUT
                        Output directory for recomputed results
  --tools {blastn,blastx,diamond,bowtie2,bwa,minimap2,all} [{blastn,blastx,diamond,bowtie2,bwa,minimap2,all} ...]
                        Specify which tools to recompute - "all" will
                        recompute for all detected tools (default: all)

Query threshold Parameters:
  --q-min-cov QUERY_MIN_COVERAGE, --query-min-coverage QUERY_MIN_COVERAGE
                        Minimum coverage threshold in percent (default: 40.0)

Gene Detection Parameters:
  --d-min-cov DETECTION_MIN_COVERAGE, --detection-min-coverage DETECTION_MIN_COVERAGE
                        Minimum coverage threshold in percent (default: 80.0)
  --d-min-id DETECTION_MIN_IDENTITY, --detection-min-identity DETECTION_MIN_IDENTITY
                        Minimum identity threshold in percent (default: 80.0)
  --d-min-base-depth DETECTION_MIN_BASE_DEPTH, --detection-min-base-depth DETECTION_MIN_BASE_DEPTH
                        Minimum average base depth for detection - calculated
                        against regions of the detected gene with at least one
                        read hit (default: 1.0)
  --d-min-reads DETECTION_MIN_NUM_READS, --detection-min-num-reads DETECTION_MIN_NUM_READS
                        Minimum number of reads required for detection
                        (default: 1)

Output Parameterts:
  --report-fasta {None,all,detected,detected-all}
                        Specify whether to output sequences that "mapped" to
                        genes."all" should only be used for deep
                        investigation/debugging."detected" will report the
                        reads that passed detection thresholds for each
                        detected gene."detected-all" will report all reads for
                        each detected gene. (default: None)
  --query-fasta QUERY_FASTA
                        Specify the original query FASTA/FASTQ file used for
                        alignment (required for reporting mapped sequences for
                        BLAST/DIAMOND).

Miscellaneous Parameters:
  -v, --version         Show program version and exit

Examples:
  # Recompute with different thresholds
  Genefior-recompute -i original_results/ -o recomputed_90_90/ \
    --d-min-cov 90 --d-min-id 90

  # More stringent depth requirement
  Genefior-recompute -i original_results/ -o high_depth/ \
    --d-min-base-depth 5.0 --d-min-reads 10

Menu for Genefíor-Gene-Stats (Genefíor-Gene-Stats or genefíor-gene-stats):

Genefíor-Gene-Stats is used to generate summary statistics and visualizations from Genefíor results.

Genefíor-Gene-Stats: Generate detailed coverage visualisations for Gene genes

options:
  -h, --help            show this help message and exit
  -i INPUT, --input INPUT
                        Input directory containing Genefíor results
  -o OUTPUT, --output OUTPUT
                        Output directory for visualisation reports
  -g GENES, --genes GENES
                        Comma-separated gene names (FULL NAMES) or path to file with gene names (one per line)
  --databases {resfinder,card,ncbi} [{resfinder,card,ncbi} ...]
                        Database(s) to interrogate
  --tools {blastn,blastx,diamond,bowtie2,bwa,minimap2,all} [{blastn,blastx,diamond,bowtie2,bwa,minimap2,all} ...]
                        Tool(s) to interrogate
  --ref-fasta REF_FASTA
                        NOT IMPLEMENTED YET - Reference FASTA file for variant calling (optional)
  --query-fasta QUERY_FASTA
                        NOT IMPLEMENTED YET - Query FASTA file (your input reads) for BLAST base-level analysis (optional)

Examples:
  # Visualise specific genes (FULL NAMES) from all tools
  Genefior-gene-stats -i results/ -o vis/ \
    -g "sul1_2_U12338,tet(W)|ARO:3000194" \
    --databases resfinder card \
    --tools diamond bowtie2 bwa

  # Visualise from gene (FULL NAMES) list file with reference
  Genefior-gene-stats -i results/ -o vis/ \
    -g genes_of_interest.txt \
    --databases resfinder \
    --tools blastn diamond 

Database Setup: See /src/Genefior/databases/ for details on setting up user-provided databases.

Genefíor includes an automated script in the Databases directory to automate the setup of user-provided databases.