Aqara BLE

Autonomous control of Aqara Bluetooth Low Energy locks from Python — no app, no phone — reconstructed by reverse-engineering the official application's observed behaviour. The U200 is the fully solved reference device.

Goals

• Document the Aqara BLE + cloud protocol precisely enough to reproduce it.
• Provide a cross-platform Python library that exposes the lock's full operation surface, offline where the hardware allows.
• Enable a native Home Assistant integration (the primary target — haos_aqara).
• Make porting to other Aqara-family devices a methodical, repeatable process.

Cloud vs. local

The U200 is a Bluetooth lock (no Wi-Fi); all control is BLE. The cloud is only a key source: session keys are derived either from the cloud per operation, or locally from the device's LTMK (long-term master key), fetched from your account once. There is no fully cloud-free first contact — identifying the lock and getting the LTMK need one authenticated cloud read — but after that, control (lock/unlock, state, battery, settings, credentials, access log) is 100% local. Only the spoken-language voice OTA needs the cloud again (to download the audio pack). The LTMK cannot be faked; it must be the real per-device key from your account.

Quick start

Two ways in — a terminal command and an importable API. Integrations couple to the API; the CLI is a thin adapter over that same API.

Terminal — the aqara command

pip install -e .            # puts `aqara` on your PATH
aqara login                 # account login only (no radio)
aqara scan  --transport bleak
aqara lock  --transport bumble --port serial:/dev/cu.usbmodemNNNN,115200
aqara unlock ; aqara operate keepalive

Only account + password + device_id are needed — from --account/--password or the environment/.env (AQARA_ACCOUNT, AQARA_PASSWORD, AQARA_DEVICE_ID; AQARA_REGION optional). The app-global appid/appkey are baked in and client_id/phone_id are generated per install, so they are optional overrides, not requirements.

Library — cloud-assisted sessions

from aqara_ble import BleakTransport, CloudAuthManager, U200Client

auth = CloudAuthManager(account="me@example.com", password="…")  # only these two
async with await U200Client.connect(
    auth=auth, transport=BleakTransport(), device_id="lumi1.xxxx"
) as lock:
    await lock.lock()
    print(await lock.battery())

The facade logs in (and re-authenticates on token expiry), scans and identifies the lock by what it advertises, connects, discovers services and runs the authenticated operation. Swap BleakTransport() for BumbleTransport("serial:/dev/…") to drive an ESP32‑S3 controller (firmware).

Library — offline (cloud-cut) sessions

Fetch the LTMK once, then derive every session locally with no per-operation cloud call:

ltmk = auth.fetch_ltmk("lumi1.xxxx")          # one cloud read; keep it in memory
async with await U200Client.connect(
    auth=auth, transport=BleakTransport(), device_id="lumi1.xxxx",
    ltmk=ltmk, login_first=False,
) as lock:
    await lock.unlock()                        # no cloud touched

Operation surface (U200)

All BLE, offline-capable (the LTMK path above). Most operations run against the always-on back panel; a few are served by the front keypad panel, which sleeps and must be awake for them (see the presence note).

Presence: the credential table (read + add/delete) and front-panel settings are served by the sleeping keypad panel, so they need it awake (a physical touch or a fingerbot). read_front_connection() reports whether it is; the access log and lock/unlock/state/battery need no keypad. The voice OTA needs it too (audio → front speaker). This is a hardware constraint, not policy — see docs/devices/u200/.

Start here

• docs/ — the documentation entry point (understand · port · diagnose).
• docs/devices/u200/validation.md — run it against a real U200 (facade, transports, troubleshooting).
• docs/devices/u200/library-vs-app.md — capability scorecard vs. the official app (offline).
• docs/architecture.md — how it works end to end and the transversal-vs-device Layer Map.
• docs/porting-guide.md — the numbered process to bring a new device online, with the CRC and login obstacles solved up front.
• CONTRIBUTING.md — Spec-Driven Development workflow and the secret-hygiene rules.
• CHANGELOG.md — released versions (PyPI: aqara-ble).

Secrets — non-negotiable

No real secret, capture, or app source ever enters this repository. Credentials and device identifiers live only in a local, git-ignored .env (see .env.example); raw captures live under a git-ignored captures/ tree. See Constitution Principle I in .specify/memory/constitution.md.

License

MIT — see LICENSE.