bilby-tgr 0.1a1

Testing GR analysis pipelines to use with Bilby

Bilby_TGR

This is the Bilby Testing General Relativity (TGR) package. It is used to develop and share analysis done by the LVC TGR group building on the Bilby stochastic sampling package.

Installation

To get started developing and using bilby_tgr, first clone the repository

$ git clone [e-mail]:lscsoft/bilby_tgr.git

To install, enter the cloned directory and run

$ pip install .

To check that you have installed it correctly, open an python prompt and run

>>> import bilby_tgr
>>> bilby_tgr.tiger.source.lal_binary_black_hole

If this returns the function, then you have it installed! You can now add new functions to the sources and access them in the same way.

Running using bilby_pipe

Once you have installed bilby_tgr, you can use the bilby_pipe package to run stoachastic sampling. For help getting installed and setup with bilby_pipe itself, see the documentation. Here, we give an example ini file. Notice that the frequency-domain-source-model is pointing to the bilby_tgr.tiger.source.lal_binary_black_hole function. You can replace this with any new function you care to define in the bilby_tgr package.

trigger-time = 1186741861.5
detectors = [H1, L1, V1]
channel-dict = {H1:DCH-CLEAN_STRAIN_C02, L1:DCH-CLEAN_STRAIN_C02, V1:Hrec_hoft_V1O2Repro2A_16384Hz}
prior_file = 4s.prior
time-marginalization=False
distance-marginalization=True
phase-marginalization=True
create-plots=True
local-generation = True
psd-dict = {H1:BayesWave_median_PSD_H1.dat, L1:BayesWave_median_PSD_L1.dat, V1:BayesWave_median_PSD_V1.dat}

label = GW170814
outdir = dalpha_2
accounting = ligo.dev.o3.cbc.pe.lalinference

duration = 4
coherence-test = False

maximum-frequency=1024
minimum-frequency=20
sampling-frequency=2048
reference-frequency = 20
waveform-approximant = IMRPhenomPv2
frequency-domain-source-model = bilby_tgr.source.lal_binary_black_hole_TIGER

calibration-model=CubicSpline
spline-calibration-envelope-dict = {H1:GWTC1_GW170814_H_CalEnv.txt, L1:GWTC1_GW170814_L_CalEnv.txt, V1:GWTC1_GW170814_V_CalEnv.txt}
spline_calibration-nodes = 10

deltaT = 0.2
sampler = dynesty
sampler-kwargs = {nlive: 1000, nact=50}
n-parallel = 4

transfer-files = False

The other thing you need is a prior file (4s.prior in the above ini). This will be a standard CBC prior, plus any new parameters.

chirp_mass = UniformInComponentsChirpMass(name="chirp_mass", minimum=12.299703, maximum=45, unit='$M_{\\odot}$')
mass_ratio = UniformInComponentsMassRatio(name="mass_ratio", minimum=0.125, maximum=1)
mass_1 = Constraint(name="mass_1", minimum=1.001398, maximum=1000)
mass_2 = Constraint(name="mass_2", minimum=1.001398, maximum=1000)
a_1 = Uniform(name="a_1", minimum=0, maximum=0.88)
a_2 = Uniform(name="a_2", minimum=0, maximum=0.88)
tilt_1 = Sine(name="tilt_1")
tilt_2 = Sine(name="tilt_2")
phi_12 = Uniform(name="phi_12", minimum=0, maximum=2 * np.pi, boundary="periodic")
phi_jl = Uniform(name="phi_jl", minimum=0, maximum=2 * np.pi, boundary="periodic")
luminosity_distance = bilby.gw.prior.UniformSourceFrame(name="luminosity_distance", minimum=1e2, maximum=5e3, unit="Mpc")
dec = Cosine(name="dec")
ra = Uniform(name="ra", minimum=0, maximum=2 * np.pi, boundary="periodic")
theta_jn = Sine(name="theta_jn")
psi = Uniform(name="psi", minimum=0, maximum=np.pi, boundary="periodic")
phase = Uniform(name="phase", minimum=0, maximum=2 * np.pi, boundary="periodic")
dchi_0 = DeltaFunction(0.)
dchi_1 = DeltaFunction(0.)
dchi_2 = DeltaFunction(0.)
dchi_3 = DeltaFunction(0.)
dchi_4 = DeltaFunction(0.)
dchi_5l = DeltaFunction(0.)
dchi_6 = DeltaFunction(0.)
dchi_6l = DeltaFunction(0.)
dchi_7 = DeltaFunction(0.)
dbeta_2 = DeltaFunction(0.)
dbeta_3 = DeltaFunction(0.)
dalpha_2 = Uniform(minimum=-10, maximum=10, latex_label="$\\delta \\alpha_2$")
dalpha_3 = DeltaFunction(0.)
dalpha_4 = DeltaFunction(0.)
dalpha_5 = DeltaFunction(0.)