BluePyEModel: Blue Brain Python Electrical Modeling Pipeline
Latest Release |
|
Documentation |
|
License |
|
Build Status |
|
Coverage |
|
Citation |
Introduction
The Blue Brain Python Electrical Modeling Pipeline (BluePyEModel) is a Python package facilitating the configuration and execution of electrical neuron model (e-model) building tasks. It covers tasks such as extraction of electrical features from electrophysiology data, e-model parameters optimisation and model validation. As such, it builds on top of eFEL, BluePyEfe and BluePyOpt.
For a general overview and example of electrical model building, please refer to the paper: A universal workflow for creation, validation and generalization of detailed neuronal models.
Note that this package only covers e-model building based on patch-clamp data and that it relies solely on the NEURON simulator.
How to cite
If you use this repository in your work, please use the Cite this repository button at the top of the repository page to get various citation formats, including APA and BibTeX.
For detailed citation information, please refer to the CITATION.cff file.
Additionally, to cite software used for different steps of the pipeline, please use these :
- Optimisation and Validation:
BluePyOpt: Van Geit et al., 2016
NEURON: The NEURON Book: Carnevale and Hines 2006 : https://doi.org/10.1017/CBO9780511541612
- Feature Extraction:
BluePyEfe: Zenodo DOI: 10.5281/zenodo.19591682
Ion Channel Selector: Me-Features-to-Mo-ID Mapping: paper: Roussel et al., 2023
Requirements
numpy
scipy >= 1.16.1
pandas
ipyparallel >= 6.3
tqdm
pyyaml
gitpython
bluepyopt >= 1.14.10
bluepyefe >= 2.3.48
neurom >= 3.0
efel >= 5.5.5
configparser
neuron >= 8.0
morph_tool >= 2.8
morphio
fasteners >= 0.16
jinja2 >= 3.0.3
currentscape >= 0.0.11
Installation
BluePyEModel can be pip installed with the following command:
pip install bluepyemodel[all]If you do not wish to install all dependencies, specific dependencies can be selected by indicating which ones to install between brackets in place of ‘all’ (If you want multiple dependencies, they have to be separated by commas). The available dependencies are:
luigi
nexus
all
To get started with the E-Model building pipeline
This section presents a general picture of the pipeline. For a detailed picture and how to use it, please refer to the L5PC example and its README.
The pipeline is divided in 6 steps:
extraction: extracts e-features from ephys recordings and averages the results e-feature values along the requested targets.
optimisation: builds a NEURON cell model and optimises its parameters using as targets the efeatures computed during e-feature extraction.
storage of the model: reads the results of the extraction and stores the models (best set of parameters) in a local json file.
validation: reads the models and runs the optimisation protocols and/or validation protocols on them. The e-feature scores obtained on these protocols are then passed to a validation function that decides if the model is good enough.
plotting: reads the models and runs the optimisation protocols and/or validation protocols on them. Then, plots the resulting traces along the e-feature scores and parameter distributions.
exporting: read the parameter of the best models and export them in files that can be used either in NEURON or for circuit building.
These six steps are to be run in order as for example validation cannot be run if no models have been stored. Steps validation, plotting and exporting are optional. Step extraction can also be optional in the case where the file containing the protocols and optimisation targets is created by hand or if it is obtained from an older project.
For an example of how to run the pipeline with the Nexus access point, see the Nexus example
Schematics of BluePyEModel classes
Acknowledgment
This work was supported by funding to the Blue Brain Project, a research center of the École polytechnique fédérale de Lausanne (EPFL), from the Swiss government’s ETH Board of the Swiss Federal Institutes of Technology. This work has been partially funded by the European Union Seventh Framework Program (FP7/20072013) under grant agreement no. 604102 (HBP), and by the European Union’s Horizon 2020 Framework Programme for Research and Innovation under the Specific Grant Agreements No. 720270 (Human Brain Project SGA1) and No. 785907 (Human Brain Project SGA2) and by the EBRAINS research infrastructure, funded from the European Union’s Horizon 2020 Framework Programme for Research and Innovation under the Specific Grant Agreement No. 945539 (Human Brain Project SGA3).
Copyright
Copyright (c) 2023-2024 Blue Brain Project/EPFL
Copyright (c) 2025 Open Brain Institute
This work is licensed under Apache 2.0
4 maintainers
Metadata
4 maintainers
Release files for bluepyemodel 1.0.48
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| bluepyemodel-1.0.48.tar.gz | 6.1 MB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| bluepyemodel-1.0.48-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 12.4 MB
Release files / bluepyemodel-1.0.48.tar.gz
| Download URL | bluepyemodel-1.0.48.tar.gz |
|---|---|
| Size | 6.1 MB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
b23d5a4a303f0ec784d0d60d983246116eb3ead72b2d3634b03243be9dcd7658
|
|
BLAKE2b-256 checksum How to use checksums |
06627e79ed3174770128f03e29b80cb976f5732ca4350c0a229fc2abc0d2e324
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency logRelease files / bluepyemodel-1.0.48-py3-none-any.whl
| Download URL | bluepyemodel-1.0.48-py3-none-any.whl |
|---|---|
| Size | 6.2 MB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
8c079848d0c171b5caf4702a7403190e204fc4633822fdb5345ceaaae6b6d480
|
|
BLAKE2b-256 checksum How to use checksums |
f79a494ef0d167c4de48093ae50064d5898bcdfadf694764e5bae121bead2062
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/7.0.0 CPython/3.13.14
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Oct 12, 2026.
Transparency log
