Skip to main content
Pre-release

This release is a pre-release and may not be stable for production use.

copyengine

Deliver optimal copy performance effortless.

Hand the copies scattered through your code (copy_, gather / scatter, host ↔ GPU transfers, layout changes, casts) to copyengine. It merges them, decides where to reorder and convert, and tunes itself to the hardware it runs on. Existing code mostly stays as it is.

Before / after

# Before: layers × blocks small copies, each its own call (tens of thousands of calls)
for layer in range(L):
    for blk in blocks:
        scale_k[layer][blk].copy_(k_qs_buf[blk].expand(N, S))

# After: one line of wrapping. The loop is unchanged; its copies are merged
# into a few transfers and kernels.
with ce.scope():
    for layer in range(L):
        for blk in blocks:
            scale_k[layer][blk].copy_(k_qs_buf[blk].expand(N, S))

Loops like this are usually rewritten by hand into a few vectorized copies or a custom kernel. copyengine aims to get that result without the rewrite, and without a new kernel for every new model or cache layout.

Where it helps

  • Inference: loading and offloading KV cache blocks between host and GPU, paged caches (gather / scatter by block id), quantizing or dequantizing KV on the way (FP8 or int8 with a scale), swapping LoRA weights in and out.
  • Training: offloading optimizer state and activations, dataloader H2D, checkpoint save / load and resharding (pure reordering).
  • Model code: x.permute(...).contiguous().cuda(), copying after index_select, permute-then-cast: write it as one ce.copy_ into the destination (with ce.lazy for gathers), and it happens in one pass, with the reordering done on the GPU.

copyengine moves and converts data. Computation such as reductions is out of scope: it runs as usual, ordered correctly around the copies.

What it guarantees

  1. Not slower than the original. Wherever torch has the same copy, torch's own copy_ is always a candidate. Anything else is measured against it, including the time copyengine itself spends planning and submitting, and is kept only if it is clearly faster. Decisions keep being re-checked while your program runs. A scope as a whole is held to the same rule: each scope call site compares running intercepted with not intercepting at all (host and GPU time), and stops intercepting where that does not clearly win, for example around ops copyengine does not take (index_copy_) or copies torch already does best (stats()["scopes"]). The explicit API has the same protection where torch can express the copy: ce.lazy views, ce.gather, ce.scatter_, ce.segments and ce.indices are measured against the same copy written with torch ops (indexing, index_copy_, slices) from the same host indices. Conversions with fn= and views torch has no form for (a reversed slice) have no torch equivalent: there copyengine picks the fastest of its own strategies. Either way it cannot beat torch code that does less work, for example indices already on the GPU, and each explicit call costs a few microseconds of host time: for a few small copies per step, freeze() or a CUDA graph is the fast path.
  2. The same results. copyengine only takes a copy when it can produce exactly torch's result; otherwise torch runs it. Host and GPU conversions are bit-identical. (NaN stays NaN, but its sign and payload bits are not kept: torch's own differ between its CPU and CUDA conversions.) This is a guarantee about copies: moving and converting values. Quantization (ce.quantize) computes, and computation has no single "torch result": the order and form of the arithmetic decide the last bit, and torch itself gives different bits on the CPU and the GPU for the same expression. There copyengine follows its own written recipe (copyengine/_quant.py), with the same bits on the host and every GPU; torch code computing the same formula another way may differ in the last bit.
  3. Easy to turn off. CE_DISABLE=1 turns copyengine's choices off: every copy runs through torch's own copy_, or exactly as submitted where torch has no equivalent.
  4. Bounded resources. With torch installed, copyengine's own device memory (staging, copy tables) comes from torch's caching allocator, so it shows in torch.cuda.memory_allocated() and obeys torch's limits; its pinned host buffers come from torch's pinned allocator (the one pin_memory() uses). Device staging has a budget (CE_STAGING_MB), and Engine(max_sms=N) (or CE_MAX_SMS) keeps copy kernels on at most N SMs per GPU, leaving the rest to your compute. Where the driver supports green contexts the limit is hard (checked on start); otherwise copyengine launches at most N thread blocks. DMA copies use the copy engines and no SMs; memory bandwidth is still shared, unless you limit it: ce.scope(bandwidth=8e9) (or Engine(bandwidth=...)) paces the copies on the GPU to about 8 GB/s per direction, leaving the rest of the link to other work.

The first runs of each new copy pattern are a warmup: copyengine measures its options, then locks the fastest. Save the result with eng.save_profile(path) to skip the warmup next time on the same machine.

Install

pip install copyengine

The wheels include the GPU kernels and the torch integration; they use the torch you already have. To build from source instead:

pip install .                      # needs CMake >= 3.26 and a C++20 compiler
                                   # GPU support: CUDA toolkit headers + nvcc at build time
pip install --no-build-isolation . # same, with torch already installed: also builds the torch integration

dtypes: float64/32/16, bfloat16, float8 (e4m3fn, e5m2, e8m0fnu), int64/32/16/8, uint8 and bool convert into each other; packed FP4 (float4_e2m1fn_x2) is copied unconverted.

Requirements: Linux on x86_64 or aarch64 (server ARM such as Grace: GH200, GB200, GB10; not Jetson), Python ≥ 3.10. GPU support runs on CUDA 12.x and 13.x drivers; the driver is loaded at runtime, nothing links against libcuda or cudart.

The torch integration is built against the torch you have installed. If you later switch torch versions, the part that intercepts copy_ is recompiled once on import (needs a C++ compiler, takes seconds, cached). If that is not possible, scopes fall back to a pure-Python interception with the same results, only slower, and a warning says so.

Use torch 2.10 or newer for the best performance. Every torch from 2.9 on gives the same results, but from 2.10 the explicit API (ce.copy_, ce.lazy, ...) runs as a compiled torch op; on 2.9 it goes through Python and costs a few more microseconds per call, which matters for many small copies. scope() interception is compiled on every supported version.

Use

import copyengine as ce
import torch

# 1. Unchanged torch code: copy_ inside a scope is queued and merged.
with ce.scope():
    for l in range(num_layers):
        for i, b in enumerate(block_ids):
            kv_cache[l, b].copy_(host_slot[l, i])

# 2. A copy torch cannot express as one view: gather + permute + cast in one pass.
src = ce.lazy(cache).index_select(0, ids).permute(0, 2, 1, 3)
ce.copy_(out_fp16, src)

# 3. Quantize / dequantize on the way.
ce.copy_(q_int8, x, fn=ce.Elementwise(scale=1 / qs, round=True, clamp=(-127, 127)))

# 4. Quantize while copying: FP8 / INT8 / INT4 / MXFP8 / NVFP4 per group of values.
ce.quantize(kv, q_cache, scales, fmt="fp8_e4m3", group=128, x_index=pages, index=slots)

# 5. Ragged or CSR layouts: many segments in one call.
ce.segments(src, dst, src_off, dst_off, length)

# 6. Overlap copies with compute: run them on a copy stream, the host never waits.
with ce.scope(stream="copy") as h:      # or stream=<a torch.cuda.Stream>
    for l in range(num_layers):
        next_kv[l].copy_(host_kv[l, ids])
...                                     # compute keeps running on the current stream
h.wait()                                # the current stream waits for the copies (GPU side)

# 7. A step that runs every iteration with new indices: plan it once.
def load_blocks(caches, pool, block_ids):      # caches: one tensor per layer
    for l, cache in enumerate(caches):
        ce.gather(cache, block_ids, 0, out=pool[l])

step = ce.plan(load_blocks)
step(caches, pool, block_ids)                  # block_ids: a CUDA int64 tensor, new each step

ce.plan(step) (or eng.plan) traces step per argument layout until the engine has settled, then replays its copies without running step or planning. Index arguments are read anew on every call: CUDA int64 tensors directly, and host indices (numpy arrays, lists of ints, CPU integer tensors) when the step passes them straight to ce.gather, ce.scatter_ or ce.lazy(...).index_select (indices the step computes from them are guarded by value instead). For host indices two strategies are measured against each other: DMA descriptors built at each call, and the statement kernel reading the indices on the GPU. Every other tensor the copies touch must be an argument and the same buffer (a new buffer or shape traces again). Only the copies replay, so a step should only copy. A replay is kept only where it beats running step plainly. eng.freeze() / plan.run() replays the last flush exactly (same buffers, same indices).

More: ce.copy_many(dsts, srcs) for lists of copies (one per layer) in one call, ce.gather / ce.scatter_ for index-based copies, ce.barrier() to wait for queued work, ce.probe() to see which copy mechanisms this machine supports (each verified by a real copy). C and C++ callers use include/copyengine/copyengine.h (a stable C ABI) or copyengine::copyengine from CMake.

To see what copyengine did: eng.stats()["last"]["decisions"] lists each group of the last flush with its strategy and why (still exploring, the A/B result it locked on, an online re-check, a CUDA graph capture), and stats()["declined"] counts the intercepted copies it left to torch, by reason. In Nsight Systems every group is an NVTX range named copyengine:<strategy>.

To compare against torch on your GPU: python bench/bench_torch.py.

With an AI coding agent

Two Agent Skills teach coding agents (Claude Code, Codex, Cursor, ...) to adopt and debug copyengine: copyengine-adopt finds copy hotspots, picks the integration, warms it up and proves same results and the measured gain; copyengine-diagnose explains slow, declined or failing copies from copyengine's own stats.

npx skills@1 add https://github.com/itdevwu/copyengine/tree/v0.3.0/skills/copyengine-adopt --global
npx skills@1 add https://github.com/itdevwu/copyengine/tree/v0.3.0/skills/copyengine-diagnose --global

How it works

Copies issued inside a scope are queued instead of run. When the scope ends, copyengine looks at them together: which ones depend on each other (exact address ranges), which can be merged across tensors, and what structure they form (2-D blocks, strides, broadcasts). For each group it picks among merged DMA calls, batched DMA (cuMemcpyBatchAsync), 2-D copies, copy kernels that also cast and scale, moving data densely over the link and reordering it on the GPU, or pinned bounce buffers for pageable memory, and measures which is fastest.

Rules worth knowing

  • Inside a scope, every other op is ordered after the queued copies whose memory it reads or writes, so code in the scope sees the copied data. Memory read without going through torch (.numpy(), raw pointers) needs ce.barrier() first.
  • GPU work runs on the current stream, like torch's own copies. GPU-to-GPU copies are not waited for; intercepted copy_ keeps its non_blocking behavior; the explicit ce.copy_ returns with any host-side copy complete (unless the engine was created with allow_async=True).
  • Threads: ce.scope() and ce.copy_ use a per-thread default engine. An Engine you share between threads works while none of them has a scope open on it; a copy or scope from another thread during one raises an error.
  • Buffers of copies that are not waited for (intercepted non_blocking copies, allow_async) are kept alive until the GPU is done with them.
  • CUDA Graphs: copies inside torch.cuda.graph (scopes, ce.copy_, FrozenPlan.run()) are recorded and replay correctly. Copies torch has no equivalent for must run once before capturing.
  • scope(stream=...): the scope's work (its copies, and any other op written in it) runs on that stream, after what the current stream had queued. The host waits for none of it, even for copies that would otherwise block; the returned handle (wait(), synchronize(), done(), event) orders it against the rest. Its buffers stay alive until the copies are done. Inside a CUDA graph capture this is a fork, and h.wait() the join. Copies copyengine leaves to torch (for example a float-to-int cast) keep torch's own semantics.
  • Index tensors (ce.lazy(...).index_select, ce.gather, ce.scatter_) may be host or CUDA tensors. CUDA indices stay on the GPU: the copy kernel reads them, so the host never waits and new indices reuse the same plan. An out-of-range CUDA index skips that element and raises ValueError at the next synchronize(); duplicate CUDA scatter indices are not detected (undefined, as in torch's index_copy_).
  • Each destination element must be written once per copy: duplicate scatter indices and a source overlapping its own destination raise UnsafeCopy in the explicit API (an intercepted copy_ leaves those to torch).

Environment

Variable Effect
CE_DISABLE=1 turn copyengine's choices off: torch's own copy, or each copy as submitted
CE_EXPLORE=0 never measure: use the loaded profile; copy patterns it does not cover run natively (or with copyengine's default where torch has no equivalent) and are listed in the profile for the next warmup
CE_STAGING_MB device staging budget in MB per stream that stages copies (default 256)
CE_LOG=plan print plans to stderr
CE_SYNC=1 wait for every copy to finish (debugging)
CE_MAX_SMS at most this many SMs per GPU for copy kernels (see guarantee 4)
CE_SHIM=0 skip the compiled copy_ interception; scopes intercept in Python
CE_TORCH_ALLOCATOR=0 take copyengine's device and pinned memory from cuMemAlloc / cuMemHostAlloc instead of torch's allocators
CE_CACHE_DIR where interception builds compiled on import are cached (default ~/.cache/copyengine)

Licensed under Apache-2.0.

Metadata

Release files for copyengine 0.4.0.dev1

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for copyengine 0.4.0.dev1
File Size Uploaded Provenance Actions
copyengine-0.4.0.dev1.tar.gz 243.6 kB With provenance Details for copyengine-0.4.0.dev1.tar.gz

Built distributions (wheels)

Table of built distributions (wheels) for copyengine 0.4.0.dev1
File Actions
copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl CPython 3.12 abi3 Linux glibc 2.28+ x86-64, Linux glibc 2.27+ x86-64 Details for copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl CPython 3.12 abi3 Linux glibc 2.28+ ARM64, Linux glibc 2.26+ ARM64 Details for copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl CPython 3.11 CPython 3.11 Linux glibc 2.27+ x86-64, Linux glibc 2.28+ x86-64 Details for copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl CPython 3.11 CPython 3.11 Linux glibc 2.28+ ARM64, Linux glibc 2.26+ ARM64 Details for copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl CPython 3.10 CPython 3.10 Linux glibc 2.28+ x86-64, Linux glibc 2.27+ x86-64 Details for copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl CPython 3.10 CPython 3.10 Linux glibc 2.28+ ARM64, Linux glibc 2.26+ ARM64 Details for copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Total release size: 40.0 MB

Release files / copyengine-0.4.0.dev1.tar.gz

Download URL copyengine-0.4.0.dev1.tar.gz
Size 243.6 kB
Tags Source
SHA-256 checksum
How to use checksums
a09f02fd79d0937194add5d7339e1599c6802208f2cabc2c80f2dea8a29708c2
BLAKE2b-256 checksum
How to use checksums
a40eca99252d08d5e527ed31d226736546a2c07e408d528d0a32a43154afe004
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

Download URL copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
Size 6.7 MB
Tags CPython 3.12 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64 abi3
SHA-256 checksum
How to use checksums
76265aa3b043fbb00d73efca28a0fd945a98f0a366fc963f7265697c82b7adfd
BLAKE2b-256 checksum
How to use checksums
802114062b13ce6f8d2ab796813c59abeddc672c03f564533c912e53f846e047
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Download URL copyengine-0.4.0.dev1-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
Size 6.6 MB
Tags CPython 3.12 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64 abi3
SHA-256 checksum
How to use checksums
45e5d4167e36f40a443f3fa9491cb4afeb58ff9efa10dc59b8c0ac69dc2559a3
BLAKE2b-256 checksum
How to use checksums
0adacb0b099a8d6ab8549fc60560f91c963acdf4237e46419765fddacb82e918
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

Download URL copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
Size 6.7 MB
Tags CPython 3.11 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64
SHA-256 checksum
How to use checksums
0a6f8bd5ccac27b5280b65a260000d64dbc35cfd7d044db6c2d9a8f63e77c5ed
BLAKE2b-256 checksum
How to use checksums
5b25e524b8e50a76b1755dd3d13a7fff8f1153746d2cf2fa8c0894962e367bc6
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Download URL copyengine-0.4.0.dev1-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
Size 6.6 MB
Tags CPython 3.11 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64
SHA-256 checksum
How to use checksums
d115510395774b4919e6bdb13acd08d995e9ab17a656e9ad761183e58ac87bc8
BLAKE2b-256 checksum
How to use checksums
8e4adc991a015c70c10203ed513d767f3d97177e392ea6e3f8e915c2b78461b4
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

Download URL copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
Size 6.7 MB
Tags CPython 3.10 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64
SHA-256 checksum
How to use checksums
89f5963428da5a59c66d136f97af610ac213278c05ca9fd82423b2c8b25d71ef
BLAKE2b-256 checksum
How to use checksums
d421cdef68cbfc058b3e5f7e0b5e1a316e04220c3c9ff4c4e3d5e7ddff174b43
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Release files / copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Download URL copyengine-0.4.0.dev1-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
Size 6.6 MB
Tags CPython 3.10 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64
SHA-256 checksum
How to use checksums
bdc250e5e96c652b01bbaea06bb9349cdd8f1cc5b9ceb3af65b388b888833da9
BLAKE2b-256 checksum
How to use checksums
306e80712ab1222af73102e14c561999fda32db03e89b5537df0176b4b241020
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

Security for copyengine 0.4.0.dev1

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

All 7 files in this release have been uploaded with provenance metadata.

Select from 7 files

Attestation for copyengine-0.4.0.dev1.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 15, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page