Skip to main content
Pre-release

This release is a pre-release and may not be stable for production use.

copyengine

Deliver optimal copy performance effortless.

Hand the copies scattered through your code (copy_, gather / scatter, host ↔ GPU transfers, layout changes, casts) to copyengine. It merges them, decides where to reorder and convert, and tunes itself to the hardware it runs on. Existing code mostly stays as it is.

Before / after

# Before: layers × blocks small copies, each its own call (tens of thousands of calls)
for layer in range(L):
    for blk in blocks:
        scale_k[layer][blk].copy_(k_qs_buf[blk].expand(N, S))

# After: one line of wrapping. The loop is unchanged; its copies are merged
# into a few transfers and kernels.
with ce.scope():
    for layer in range(L):
        for blk in blocks:
            scale_k[layer][blk].copy_(k_qs_buf[blk].expand(N, S))

Loops like this are usually rewritten by hand into a few vectorized copies or a custom kernel. copyengine aims to get that result without the rewrite, and without a new kernel for every new model or cache layout.

Where it helps

  • Inference: loading and offloading KV cache blocks between host and GPU, paged caches (gather / scatter by block id), quantizing or dequantizing KV on the way (FP8 or int8 with a scale), swapping LoRA weights in and out.
  • Training: offloading optimizer state and activations, dataloader H2D, checkpoint save / load and resharding (pure reordering).
  • Model code: x.permute(...).contiguous().cuda(), copying after index_select, permute-then-cast: write it as one ce.copy_ into the destination (with ce.lazy for gathers), and it happens in one pass, with the reordering done on the GPU.

copyengine moves and converts data. Computation such as reductions is out of scope: it runs as usual, ordered correctly around the copies.

What it guarantees

  1. Not slower than the original. Wherever torch has the same copy, torch's own copy_ is always a candidate. Anything else is measured against it, including the time copyengine itself spends planning and submitting, and is kept only if it is clearly faster. Decisions keep being re-checked while your program runs. A scope as a whole is held to the same rule: each scope call site compares running intercepted with not intercepting at all (host and GPU time), and stops intercepting where that does not clearly win, for example around ops copyengine does not take (index_copy_) or copies torch already does best (stats()["scopes"]). The explicit API has the same protection where torch can express the copy: ce.lazy views, ce.gather, ce.scatter_, ce.segments and ce.indices are measured against the same copy written with torch ops (indexing, index_copy_, slices) from the same host indices. Conversions with fn= and views torch has no form for (a reversed slice) have no torch equivalent: there copyengine picks the fastest of its own strategies. Either way it cannot beat torch code that does less work, for example indices already on the GPU, and each explicit call costs a few microseconds of host time: for a few small copies per step, freeze() or a CUDA graph is the fast path.
  2. The same results. copyengine only takes a copy when it can produce exactly torch's result; otherwise torch runs it. Host and GPU conversions are bit-identical. (NaN stays NaN, but its sign and payload bits are not kept: torch's own differ between its CPU and CUDA conversions.) This is a guarantee about copies: moving and converting values. Quantization (ce.quantize) computes, and computation has no single "torch result": the order and form of the arithmetic decide the last bit, and torch itself gives different bits on the CPU and the GPU for the same expression. There copyengine follows its own written recipe (copyengine/_quant.py), with the same bits on the host and every GPU; torch code computing the same formula another way may differ in the last bit.
  3. Easy to turn off. CE_DISABLE=1 turns copyengine's choices off: every copy runs through torch's own copy_, or exactly as submitted where torch has no equivalent.
  4. Bounded resources. With torch installed, copyengine's own device memory (staging, copy tables) comes from torch's caching allocator, so it shows in torch.cuda.memory_allocated() and obeys torch's limits; its pinned host buffers come from torch's pinned allocator (the one pin_memory() uses). Device staging has a budget (CE_STAGING_MB), and Engine(max_sms=N) (or CE_MAX_SMS) keeps copy kernels on at most N SMs per GPU, leaving the rest to your compute. Where the driver supports green contexts the limit is hard (checked on start); otherwise copyengine launches at most N thread blocks. DMA copies use the copy engines and no SMs; memory bandwidth is still shared, unless you limit it: ce.scope(bandwidth=8e9) (or Engine(bandwidth=...)) paces the copies on the GPU to about 8 GB/s per direction, leaving the rest of the link to other work.

The first runs of each new copy pattern are a warmup: copyengine measures its options, then locks the fastest. Save the result with eng.save_profile(path) to skip the warmup next time on the same machine.

Install

pip install copyengine

The wheels include the GPU kernels and the torch integration; they use the torch you already have. To build from source instead:

pip install .                      # needs CMake >= 3.26 and a C++20 compiler
                                   # GPU support: CUDA toolkit headers + nvcc at build time
pip install --no-build-isolation . # same, with torch already installed: also builds the torch integration

dtypes: float64/32/16, bfloat16, float8 (e4m3fn, e5m2, e8m0fnu), int64/32/16/8, uint8 and bool convert into each other; packed FP4 (float4_e2m1fn_x2) is copied unconverted.

Requirements: Linux on x86_64 or aarch64 (server ARM such as Grace: GH200, GB200, GB10; not Jetson), Python ≥ 3.10. GPU support runs on CUDA 12.x and 13.x drivers; the driver is loaded at runtime, nothing links against libcuda or cudart.

The torch integration is built against the torch you have installed. If you later switch torch versions, the part that intercepts copy_ is recompiled once on import (needs a C++ compiler, takes seconds, cached). If that is not possible, scopes fall back to a pure-Python interception with the same results, only slower, and a warning says so.

Use torch 2.10 or newer for the best performance. Every torch from 2.9 on gives the same results, but from 2.10 the explicit API (ce.copy_, ce.lazy, ...) runs as a compiled torch op; on 2.9 it goes through Python and costs a few more microseconds per call, which matters for many small copies. scope() interception is compiled on every supported version.

Use

import copyengine as ce
import torch

# 1. Unchanged torch code: copy_ inside a scope is queued and merged.
with ce.scope():
    for l in range(num_layers):
        for i, b in enumerate(block_ids):
            kv_cache[l, b].copy_(host_slot[l, i])

# 2. A copy torch cannot express as one view: gather + permute + cast in one pass.
src = ce.lazy(cache).index_select(0, ids).permute(0, 2, 1, 3)
ce.copy_(out_fp16, src)

# 3. Quantize / dequantize on the way.
ce.copy_(q_int8, x, fn=ce.Elementwise(scale=1 / qs, round=True, clamp=(-127, 127)))

# 4. Quantize while copying: FP8 / INT8 / INT4 / MXFP8 / NVFP4 per group of values.
ce.quantize(kv, q_cache, scales, fmt="fp8_e4m3", group=128, x_index=pages, index=slots)

# 5. Ragged or CSR layouts: many segments in one call.
ce.segments(src, dst, src_off, dst_off, length)

# 6. Overlap copies with compute: run them on a copy stream, the host never waits.
with ce.scope(stream="copy") as h:      # or stream=<a torch.cuda.Stream>
    for l in range(num_layers):
        next_kv[l].copy_(host_kv[l, ids])
...                                     # compute keeps running on the current stream
h.wait()                                # the current stream waits for the copies (GPU side)

# 7. A step that runs every iteration with new indices: plan it once.
def load_blocks(caches, pool, block_ids):      # caches: one tensor per layer
    for l, cache in enumerate(caches):
        ce.gather(cache, block_ids, 0, out=pool[l])

step = ce.plan(load_blocks)
step(caches, pool, block_ids)                  # block_ids: a CUDA int64 tensor, new each step

ce.plan(step) (or eng.plan) traces step per argument layout until the engine has settled, then replays its copies without running step or planning. Index arguments are read anew on every call: CUDA int64 tensors directly, and host indices (numpy arrays, lists of ints, CPU integer tensors) when the step passes them straight to ce.gather, ce.scatter_ or ce.lazy(...).index_select (indices the step computes from them are guarded by value instead). For host indices two strategies are measured against each other: DMA descriptors built at each call, and the statement kernel reading the indices on the GPU. Every other tensor the copies touch must be an argument and the same buffer (a new buffer or shape traces again). Only the copies replay, so a step should only copy. A replay is kept only where it beats running step plainly. eng.freeze() / plan.run() replays the last flush exactly (same buffers, same indices).

More: ce.copy_many(dsts, srcs) for lists of copies (one per layer) in one call, ce.gather / ce.scatter_ for index-based copies, ce.barrier() to wait for queued work, ce.probe() to see which copy mechanisms this machine supports (each verified by a real copy). C and C++ callers use include/copyengine/copyengine.h (a stable C ABI) or copyengine::copyengine from CMake.

To see what copyengine did: eng.stats()["last"]["decisions"] lists each group of the last flush with its strategy and why (still exploring, the A/B result it locked on, an online re-check, a CUDA graph capture), and stats()["declined"] counts the intercepted copies it left to torch, by reason. In Nsight Systems every group is an NVTX range named copyengine:<strategy>.

To compare against torch on your GPU: python bench/bench_torch.py.

With an AI coding agent

Two Agent Skills teach coding agents (Claude Code, Codex, Cursor, ...) to adopt and debug copyengine: copyengine-adopt finds copy hotspots, picks the integration, warms it up and proves same results and the measured gain; copyengine-diagnose explains slow, declined or failing copies from copyengine's own stats.

npx skills@1 add https://github.com/itdevwu/copyengine/tree/v0.4.2/skills/copyengine-adopt --global
npx skills@1 add https://github.com/itdevwu/copyengine/tree/v0.4.2/skills/copyengine-diagnose --global

How it works

Copies issued inside a scope are queued instead of run. When the scope ends, copyengine looks at them together: which ones depend on each other (exact address ranges), which can be merged across tensors, and what structure they form (2-D blocks, strides, broadcasts). For each group it picks among merged DMA calls, batched DMA (cuMemcpyBatchAsync), 2-D copies, copy kernels that also cast and scale, moving data densely over the link and reordering it on the GPU, or pinned bounce buffers for pageable memory, and measures which is fastest.

Rules worth knowing

  • Inside a scope, every other op is ordered after the queued copies whose memory it reads or writes, so code in the scope sees the copied data. Memory read without going through torch (.numpy(), raw pointers) needs ce.barrier() first.
  • GPU work runs on the current stream, like torch's own copies. GPU-to-GPU copies are not waited for; intercepted copy_ keeps its non_blocking behavior; the explicit ce.copy_ returns with any host-side copy complete (unless the engine was created with allow_async=True).
  • Threads: ce.scope() and ce.copy_ use a per-thread default engine. An Engine you share between threads works while none of them has a scope open on it; a copy or scope from another thread during one raises an error.
  • Buffers of copies that are not waited for (intercepted non_blocking copies, allow_async) are kept alive until the GPU is done with them.
  • CUDA Graphs: copies inside torch.cuda.graph (scopes, ce.copy_, FrozenPlan.run()) are recorded and replay correctly. Copies torch has no equivalent for must run once before capturing.
  • scope(stream=...): the scope's work (its copies, and any other op written in it) runs on that stream, after what the current stream had queued. The host waits for none of it, even for copies that would otherwise block; the returned handle (wait(), synchronize(), done(), event) orders it against the rest. Its buffers stay alive until the copies are done. Inside a CUDA graph capture this is a fork, and h.wait() the join. Copies copyengine leaves to torch (for example a float-to-int cast) keep torch's own semantics.
  • Index tensors (ce.lazy(...).index_select, ce.gather, ce.scatter_) may be host or CUDA tensors. CUDA indices stay on the GPU: the copy kernel reads them, so the host never waits and new indices reuse the same plan. An out-of-range CUDA index skips that element and raises ValueError at the next synchronize(); duplicate CUDA scatter indices are not detected (undefined, as in torch's index_copy_).
  • Each destination element must be written once per copy: duplicate scatter indices and a source overlapping its own destination raise UnsafeCopy in the explicit API (an intercepted copy_ leaves those to torch).

Environment

Variable Effect
CE_DISABLE=1 turn copyengine's choices off: torch's own copy, or each copy as submitted
CE_EXPLORE=0 never measure: use the loaded profile; copy patterns it does not cover run natively (or with copyengine's default where torch has no equivalent) and are listed in the profile for the next warmup
CE_STAGING_MB device staging budget in MB per stream that stages copies (default 256)
CE_LOG=plan print plans to stderr
CE_SYNC=1 wait for every copy to finish (debugging)
CE_MAX_SMS at most this many SMs per GPU for copy kernels (see guarantee 4)
CE_SHIM=0 skip the compiled copy_ interception; scopes intercept in Python
CE_TORCH_ALLOCATOR=0 take copyengine's device and pinned memory from cuMemAlloc / cuMemHostAlloc instead of torch's allocators
CE_CACHE_DIR where interception builds compiled on import are cached (default ~/.cache/copyengine)

Licensed under Apache-2.0.

Metadata

Release files for copyengine 0.5.0.dev3

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for copyengine 0.5.0.dev3
File Size Uploaded Provenance Actions
copyengine-0.5.0.dev3.tar.gz 308.3 kB With provenance Details for copyengine-0.5.0.dev3.tar.gz

Built distributions (wheels)

Table of built distributions (wheels) for copyengine 0.5.0.dev3
File Actions
copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl CPython 3.12 abi3 Linux glibc 2.27+ x86-64, Linux glibc 2.28+ x86-64 Details for copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl CPython 3.12 abi3 Linux glibc 2.28+ ARM64, Linux glibc 2.26+ ARM64 Details for copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl CPython 3.11 CPython 3.11 Linux glibc 2.27+ x86-64, Linux glibc 2.28+ x86-64 Details for copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl CPython 3.11 CPython 3.11 Linux glibc 2.28+ ARM64, Linux glibc 2.26+ ARM64 Details for copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl CPython 3.10 CPython 3.10 Linux glibc 2.28+ x86-64, Linux glibc 2.27+ x86-64 Details for copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl CPython 3.10 CPython 3.10 Linux glibc 2.28+ ARM64, Linux glibc 2.26+ ARM64 Details for copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Total release size: 66.0 MB

Release files / copyengine-0.5.0.dev3.tar.gz

Download URL copyengine-0.5.0.dev3.tar.gz
Size 308.3 kB
Tags Source
SHA-256 checksum
How to use checksums
bfdfc95552db1ab60b27c454576bb0cb9bb58ab0c151c57ff49a5a364fb6378b
BLAKE2b-256 checksum
How to use checksums
271ecfe59de4bbc144cefdc19dd14284e662b916e2b6fe0209f1d9a12ebbf7d5
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

Download URL copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
Size 11.0 MB
Tags CPython 3.12 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64 abi3
SHA-256 checksum
How to use checksums
feebc937e6a543dc15bc547d4fdcfa2a408d6d038ff6ba21926baf2e797c4d74
BLAKE2b-256 checksum
How to use checksums
e60bfe6d6c75f9098b5665ae3787e26114cc6bce2f0ef8e9172c5b32224a7a3c
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Download URL copyengine-0.5.0.dev3-cp312-abi3-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
Size 10.9 MB
Tags CPython 3.12 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64 abi3
SHA-256 checksum
How to use checksums
b5925efc53e7bd1e2dc026855291c73ba9d6ed2b7410ec9e63f97fb80dcb156b
BLAKE2b-256 checksum
How to use checksums
07da43612ddde67bec10f4d57e2f03f73635ae63a710ecee256de4e5e35ef031
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

Download URL copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
Size 11.0 MB
Tags CPython 3.11 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64
SHA-256 checksum
How to use checksums
269b29d412f68fabb7731fbe9f45147b4fe96e996b0038d314e6a689c7848826
BLAKE2b-256 checksum
How to use checksums
60d13f2726691c2568074b59bfaaef8c251ca64c2768eb0ba90b42bbd5e2c242
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Download URL copyengine-0.5.0.dev3-cp311-cp311-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
Size 10.9 MB
Tags CPython 3.11 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64
SHA-256 checksum
How to use checksums
8ded457d6ae0d79e8bd2e27e63b282aec854a46631abd4ebd10aa83b680b580e
BLAKE2b-256 checksum
How to use checksums
7d9a8d7097aec52a5a37576de63ee7842612bca3ede5484679d4487f0bef2f62
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl

Download URL copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl
Size 11.0 MB
Tags CPython 3.10 Linux glibc 2.27+ x86-64 Linux glibc 2.28+ x86-64
SHA-256 checksum
How to use checksums
a995a2ca21dd1b29216616b06d0d9443aca53d07e8761a592742363c40b7515d
BLAKE2b-256 checksum
How to use checksums
81b76fc0b8247b02f57a45a36c9cef2f19894b424617bf6707e5e1906a5f1e02
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl

Download URL copyengine-0.5.0.dev3-cp310-cp310-manylinux_2_26_aarch64.manylinux_2_28_aarch64.whl
Size 10.9 MB
Tags CPython 3.10 Linux glibc 2.26+ ARM64 Linux glibc 2.28+ ARM64
SHA-256 checksum
How to use checksums
5cf6bb10c2d52e4cfafded32f87196f442ae2fb7bd33e49d9a1901c37bcd8f69
BLAKE2b-256 checksum
How to use checksums
ce53188092bc9cbafc30022edbbf5598cd6da321075b1a763224274ed3d9ab4c
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Security for copyengine 0.5.0.dev3

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

All 7 files in this release have been uploaded with provenance metadata.

Select from 7 files

Attestation for copyengine-0.5.0.dev3.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page