CTally

A floating status light for your Claude Code sessions on macOS and Ubuntu: whose turn is it? Glance over instead of tabbing back to the terminal.

pipx install ctally
ctally setup --tmux

The name comes from the tally light, the lamp on a broadcast camera that shows it's live, and from tallying up your sessions.

Every session gets a hexagon whose glyph and color say what it's doing:

Features

• Floats above everything without ever taking keyboard focus; on macOS on every Space and beside full-screen apps too.
• One to three sessions show as big badges; four or more become a compact list with each session's name and directory, up to 16 rows. Session names come from /rename, or else the title Claude gave the session.
• Sees subagents and workflows: while a session's agents run, its row says how many and what they're up to (4 agents · Verify), with a progress bar for a workflow, and its badge carries the count. More below.
• Your plan's usage limits: the session, the week, and each model's week, as bars with when each resets, kept fresh after every reply. More below.
• Built for tmux: every row shows its pane, a click switches to it, prefix + J jumps to the session that needs you, and the counts can sit in tmux's status line. More below.
• Click a row to bring that session's terminal forward: the exact tmux pane, and on macOS the exact Terminal tab.
• Fold the list down to a bar of counts with the chevron.
• When a turn finishes, its row washes green and its mark bounces once; then everything holds still.
• Menu bar (or top bar) icon to show or hide CTally. Off stays off across restarts, and the app sits idle with no timers.
• Settings window with an on/off switch, an opacity slider (80% by default), and a switch for the usage limits.
• Silent: no sounds, no notifications, no Dock icon.
• One Python package, installed with pipx: the same Qt app on macOS and Linux, and a ctally command for the terminal and tmux.

Subagents and workflows

When a session hands work to subagents, or runs a whole workflow of them, CTally follows along:

• The row grows a line about its agents: how many are running, and what they're doing. For a workflow that's the phase it has reached (4 agents · Verify), with a progress bar of its agents finished out of those started so far (12/16; the total grows as each phase sets off more). For a single agent it's the task it was given (1 agent · Find callers of parseConfig).
• The badge carries the count (⚙ 4) on its shoulder.
• The session stays working until its agents are back. A session that sends agents off in the background finishes its own turn at once, and would otherwise look done for as long as they run, sometimes hours. CTally keeps it cyan until they return and Claude has taken in their results, and prefix + J leaves it alone till then.

ctally list shows the count too. This needs the subagent hooks that ctally setup adds; if you set up CTally before they existed, run ctally setup again and restart your sessions.

Usage limits

CTally shows your plan's usage limits the way Claude Code's /usage does: the current session (the five-hour window), the week across all models, any per-model weekly limit (Fable, say), and usage credits if you've switched them on.

• The list gives every limit a line between the sessions and the count bar: a bar, the share used, and when it resets (in 1h 48m, Sat 10 pm).
• The folded bar and the badges carry two small meters, the session (5h) and the week (7d).
• Hover over any of them for the details, and how fresh they are. The menu bar (top bar) icon's menu lists them too.
• Colours: a bar turns amber at 75% and red at 90%. Numbers more than an hour old are dimmed.
• tmux's status line gets 5h 71% 7d 49% after the counts, coloured the same way, and ctally usage prints the lot:

$ ctally usage
Current session            ███████░░░  71%  resets 7:30 pm (in 2h 25m)
Current week (all models)  █████░░░░░  49%  resets Sat Oct 10, 10 pm
Current week (Fable)       ░░░░░░░░░░   0%  resets Sat Oct 10, 10 pm
Updated just now

Where the numbers come from: Claude Code passes the session and week limits to its status line after every reply, so ctally setup adds a status line that hands them to CTally and shows nothing itself (a status line you already had keeps showing; CTally's runs it). Everything else comes from the copy of the /usage numbers Claude Code keeps in ~/.claude.json, which it refreshes only now and then. Limits apply to Pro, Max and Team plans; with an API key there are none to show.

Turn the limits off with the switch in Settings, or right-click → Hide Usage Limits. That hides them from tmux too. ctally setup --no-statusline leaves the status line out; the limits then refresh only when Claude Code refreshes its copy.

Built for tmux

Running a dozen Claude Code sessions across tmux sessions and split panes is exactly what CTally is for. It knows where each one lives, because tmux leaves TMUX and TMUX_PANE in the environment of everything started inside it.

• Every row shows its pane. webapp:0.1 is tmux session webapp, window 0, pane 1, and it sits next to the directory, so two sessions in the same folder are easy to tell apart.
• Click a row and tmux switches to that exact pane. Then the Terminal tab attached to that tmux session comes forward, or a new Terminal window attaches to it if no tab shows it.
• prefix + J jumps to the session that needs you, without touching the mouse: waiting sessions first, then finished ones, longest-waiting first. Press it again for the next one.
• The counts sit in tmux's status line (!1 ▶2 ✓5: waiting, working, done), and they change the moment a session does. Your plan's session and week usage follow them (5h 71% 7d 49%).

Turn on the key and the status line with:

ctally setup --tmux

This adds a marked block to ~/.tmux.conf and applies it to your running tmux at once. The file is backed up first, and ctally uninstall takes the block out again. To set it up by hand instead:

bind-key J run-shell -b "'$HOME/.local/bin/ctally' jump '#{pane_id}' '#{client_name}' '#{socket_path}'"
set -ag status-right ' #($HOME/.local/bin/ctally status --tmux)'
set -g status-right-length 80

The same ctally command works in any shell (it's installed to ~/.local/bin):

$ ctally list
waiting  webapp:0.0       -         webapp                   5f3c…
done     webapp:0.1       -         webapp                   9a1e…
working  api:0.0          4 agents  api                      c27d…
$ ctally status
!1 ▶1 ✓1
$ ctally usage         # your plan's usage limits
$ ctally jump          # inside tmux: go to the session that needs you

Requirements

• macOS 12 or later, or Ubuntu 22.04 or later (other Linux desktops should work too; see Ubuntu)
• Python 3.9 or later and pipx
• Claude Code

Install

pipx install ctally
ctally setup            # or: ctally setup --tmux

pipx puts CTally in an environment of its own, with Qt (PySide6, about 100–400 MB depending on the platform), and the ctally command in ~/.local/bin. Then ctally setup does four things:

1. Copies the hook and status line scripts to ~/.claude/hooks/ (ctally.sh, ctally-statusline.sh).
2. Adds the hooks and the status line to ~/.claude/settings.json. It merges with your existing settings and backs the file up first. A status line you already had is kept, and still shows.
3. Starts CTally at login: a LaunchAgent on macOS, an autostart entry (~/.config/autostart) on Linux.
4. Starts CTally now.

Restart any Claude Code sessions that were already running so they pick up the hooks.

To upgrade: pipx upgrade ctally, then ctally setup again. It restarts CTally and keeps your preferences. For the latest commit, before it's released: pipx install --force git+https://github.com/JinyuJinyuJinyu/ctally.git.

Upgrading from the Swift version (CTally.app, installed with ./install.sh): remove the old ctally script first, since pipx won't replace a file it didn't put there: rm ~/.local/bin/ctally. Then install as above. ctally setup quits and removes ~/Applications/CTally.app and its login item, and keeps your opacity, fold setting and position.

Ubuntu

sudo apt install pipx libxcb-cursor0
pipx ensurepath          # then open a new terminal
pipx install ctally
ctally setup --tmux

libxcb-cursor0 is the one library Qt needs that a desktop install of Ubuntu lacks.

• Wayland (Ubuntu's default) lets no app keep itself on top or choose where its window goes, so CTally runs through XWayland, which allows both. That happens on its own; you don't need to switch sessions.
• The top-bar icon uses Ubuntu's AppIndicator support, which is on by default. On a desktop without a tray, right-click the indicator itself for the menu.
• Clicking a session switches tmux to its pane, and opens a terminal on that tmux session if none shows it. Raising the terminal's window works on X11 with xdotool installed (sudo apt install xdotool); under Wayland no app may raise another's window, so bring the terminal up yourself. prefix + J needs neither.

Using it

The first time you click a session on macOS, macOS asks whether CTally (shown as Python, which runs it) may control Terminal. Allow it so CTally can bring the right tab forward. You can change this later in System Settings → Privacy & Security → Automation.

How it works

Claude Code ──hooks──▶ ~/.claude/ctally.d/<session id> ──read 5×/s──▶ ctally run
            ──status line──▶ ~/.claude/ctally.d/.statusline ─┘

Two pieces, connected by a folder:

1. Hooks. ctally.sh (in src/ctally/hooks/) runs on Claude Code events and writes one small file per session: working <pid> <project>.

   Event	State written
   UserPromptSubmit	working
   PreToolUse	working (a tool is about to run)
   PostToolUse	working (back to work after a permission prompt)
   Stop	done, or still working if subagents or a workflow run on in the background
   Notification	waiting (a permission prompt, or idle input)
   SessionEnd	removes the file
   SubagentStart / SubagentStop	adds / removes a file per agent in ~/.claude/ctally.d/.agents/<session id>/

   A waiting never overwrites done: Claude Code also sends its idle notification after a turn ends. Nor does the idle notification count while the session's agents are still out. Inside tmux, a change of state also redraws tmux's status lines, so the counts there update at once.

   The status line. ctally-statusline.sh saves what Claude Code hands its status line, the latest from any session, to ~/.claude/ctally.d/.statusline whenever it includes the usage limits. It prints nothing, or runs the status line you had before and prints what that prints.

2. The app. It polls the folder five times a second, checking modification times first so unchanged files aren't re-read. Sessions whose process has exited drop off the display. The exception is when nothing else is running: a finished one stays so you can still see it. Leftover files are cleaned up after a day. The usage limits it checks every two seconds, the same way.

To add the hooks by hand, copy src/ctally/hooks/ctally.sh and ctally-statusline.sh to ~/.claude/hooks/ and merge this into ~/.claude/settings.json (to keep a status line you have, put its command after CTally's as one quoted argument: "\"$HOME/.claude/hooks/ctally-statusline.sh\" 'your command'"):

{
  "statusLine": { "type": "command", "command": "\"$HOME/.claude/hooks/ctally-statusline.sh\"" },
  "hooks": {
    "UserPromptSubmit": [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" working" }] }],
    "PreToolUse":       [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" working" }] }],
    "PostToolUse":      [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" working" }] }],
    "Stop":             [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" done" }] }],
    "Notification":     [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" waiting" }] }],
    "SessionEnd":       [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" end" }] }],
    "SubagentStart":    [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" agent-start" }] }],
    "SubagentStop":     [{ "hooks": [{ "type": "command", "command": "\"$HOME/.claude/hooks/ctally.sh\" agent-stop" }] }]
  }
}

Privacy

Everything stays on your machine. The app makes no network requests. To show session names it reads each transcript in ~/.claude/projects/, but only two parts:

• the last 256 KB, for the /rename name or the generated title
• the first 256 KB, once, for the directory the session started in

While agents run it also reads, beside the transcript, a running workflow's progress journal (for its phase and how many agents are done) and a lone subagent's one-line task description. It never reads your conversations otherwise.

For the usage limits it reads what its status line saved, and from ~/.claude.json only the cached /usage numbers and your account's id, to check they're yours. It never touches your credentials.

Terminal support

On macOS, clicking a session works best in Terminal.app, with or without tmux: CTally finds the exact tab, or the exact tmux pane and the tab attached to it. In other terminals (iTerm2, VS Code, …) and for sessions in the Claude desktop app, it still switches tmux to the right pane and brings the app forward, but can't pick the tab. On Linux, see Ubuntu. The prefix + J jump key works in any terminal.

Uninstall

ctally uninstall
pipx uninstall ctally

The first removes the hooks and status line in ~/.claude/settings.json (putting back a status line you had) and the block in your tmux config, both after a backup, then the scripts, starting at login, the state files and the preferences. Your other Claude Code and tmux settings are left as they are. The second removes the command and its Qt.

Troubleshooting

• CTally doesn't change state. Restart your Claude Code sessions after installing. Then check that ~/.claude/ctally.d/ gets a file when you send a prompt.
• Clicking a session does nothing. On macOS, allow Python (which runs CTally) to control Terminal under System Settings → Privacy & Security → Automation.
• prefix + J says "nothing needs you". That means no session is waiting or done; ctally list shows what CTally sees. A session started outside tmux can't be jumped to.
• CTally is gone. Use the hexagon icon in the menu bar → Show CTally. If the icon is gone too, it isn't running: run ctally run. Its log is ~/Library/Logs/ctally.log on macOS and ~/.local/state/ctally/ctally.log on Linux.
• No usage limits. They need a Pro, Max or Team plan, and a reply in some session since CTally's setup (restart sessions that were running then). ctally usage shows what CTally has.
• Ubuntu: "Could not load the Qt platform plugin xcb". Install the library it names, usually sudo apt install libxcb-cursor0.

Developing

python3 -m venv .venv && .venv/bin/pip install -e . pytest
.venv/bin/ctally run                 # the indicator, from your checkout
.venv/bin/python -m pytest tests     # the tests
.venv/bin/python tools/snapshot.py   # the README's screenshots, from demo data

Set CTALLY_STATE_DIR, CTALLY_PROJECTS_DIR, CTALLY_CONFIG_DIR and CTALLY_CLAUDE_JSON to run it against other folders than ~/.claude/ctally.d, ~/.claude/projects and its own settings, and another file than ~/.claude.json.

Releasing

Releases go to PyPI from GitHub, by .github/workflows/publish.yml, using PyPI's Trusted Publishing: PyPI trusts that workflow in this repository, so no token is stored anywhere.

1. Bump __version__ in src/ctally/__init__.py, then commit and push.
2. Create a release whose tag matches it: gh release create v0.2.1 --generate-notes, or on GitHub.
3. The workflow builds the package, checks it and uploads it. pipx upgrade ctally then picks it up.

Once, before the first release: on pypi.org → your account → Publishing, add a pending publisher with PyPI project ctally, owner JinyuJinyuJinyu, repository ctally, workflow publish.yml and environment pypi.

License

MIT

CTally is an independent community project. It is not affiliated with or endorsed by Anthropic.